[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[K12OSN] New 4.2 K12LTSP installed but old x_mode doesn't work



The new install is almost finished, but I do have a couple of questions. The first is that the terminals that did work (k12ltsp 3.2) using the x_mode line in lts.conf :

X_MODE_0 = 1024x768 65 1024 1048 1184 1344 768 771 777 806 -hsync -vsync

as in a workstation defined by:

[lib07]
XSERVER = auto
# 60 Hz Resolutions
X_MODE_0 = 1024x768 65 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
X_MOUSE_PROTOCOL = "IMPS/2"
X_MOUSE_DEVICE = "/dev/psaux"
# Option "Emulate3Buttons" "yes"
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 48m
RUNLEVEL = 5


fail to start X. I get a monitor that turns off because of being over-synced. If I set the x_mode to 800x600 X will start, but we just need at least 1024x768 as before. The monitors are AOC 15" 5E and the video is onboard SIS 730 using a ECS K7SEM mobo. Only since moving to the 4.2 K12 have we had this problem...

I've got the system tentatively shut down tomorrow (Monday) just in case I can't get this and what ever else fixed in time.

Thanks, Jim



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]