[K12OSN] To mirror or not to mirror and splitting home dir between servers
Mark Gumprecht
gumprechtm at msln.net
Tue Jul 12 11:17:22 UTC 2005
I had a heck of a time getting the script to go. So I tried several
other directions from start to finish and none worked entirely. So, I
followed the script more closely, meaning, I went to the DAG site and
downloaded the equivalent DAG rpm packages for el4 that the script
called for in fc3. Prior to that, I did the cpan install::Bundle and all
that. I made sure that everything was there. So then I decided not to
fully rem the rpm's out, just to wildcard them with *. I found that even
though I went to cpan a second time and verified the packages were
installed, that the script was still complaining that the packages were
not installed. I installed the required rpm's by hand, ran the 2.0
script and she worked. All I did different was copy the fc3 install in
the dist.pm file, change the header to centos4, wildcarded the dag rpm
package lines to just the name*.rpm, and ran the script. The only other
gotcha I had was SE Linux settings, since this server is not toward the
internet, I shut it off.
I have had more success with centos4 than any other distro. I'm not
saying it is better than any other, just for the hardware I use, Dell,
it has been rock solid. I've been running centos 3/4 and some 64 bit
versions without issue. The biggy was the perc 4 e/di raid controller
that Dell uses, so far the centos4(non-pay for) is the only one to just
"pick it up" and work. I tried fc1/2/3, ubuntu, solaris 10, suse 9.1
pro, and rh 9.0. I have not tried fc4 or suse 9.2. Each worked to some
degree with extra drivers and what not, but I was in search of the best
distro for the hardware I run. with least amount of issues. As
example. I have a new Dell PE 2850 4-73gb scsi in dell raid 5
configuration, 3 gig ram and dual 2.8 ghz xeon processors. I loaded a
stock k12ltspEL install via NFS, did updates(which,for me, worked great
AFTER I overrode the BESS filter), put a shiny, new, buff, exhilarating,
vibrant, quick, cost effective, ltsp term 150e from
disklessworkstations.com (shameless plug!), and without any
configuration, just works.
HTH
Mark
John Baillie wrote:
>On Mon, 2005-07-11 at 08:07 -0400, Mark Gumprecht wrote:
>
>
>>Finally got centos4 set as a samba/ldap pdc,
>>
>>
>
>snip --->
>
>Hello Mark,
>
>Did you base your install on David and Matt's script / install
>instructions.
>
>Are there any quirks installing on CentOS?
>
>John
>
>_______________________________________________
>K12OSN mailing list
>K12OSN at redhat.com
>https://www.redhat.com/mailman/listinfo/k12osn
>For more info see <http://www.k12os.org>
>
>
>
--
Mark Gumprecht
Data Systems Specialist
MSAD3
Unity, ME
gumprechtm at msln.net
More information about the K12OSN
mailing list