[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] 4.4 and nfs server not responding ?



aust_txv access-k12 org wrote:
Hi,
I am getting on my workstations...

Doing the pivot_root
e100: eth0 NIC link is up 100 mbps full duplexx
nfs: server 192.168.0.254 not responding, still trying.

The last time I had this error,  it was a terrible patch cable ( makes
sense )
On a basic install of 4.4p? - no changes but a 10 dot ip on eth1.
Workstations  DCHP, all the stuff for NFS seems to be running (nfsd,
portmap, and mountd).  The workstations are PXE 2.0 or above.  One is an
on-board intel using the e100 driver and the other is a 3com 905TXM card
and I get the same error ( thought it was a shared IRQ issue )  Grabbed
my running 4.2 k12LTSP and connected to the same switch, same cables and
same two workstations and they boot right up like they always do ?
Thanks in advance,
Tom




Here are a couple of things to check:

1) what do the logs say?

	/var/log/messages
	/var/log/secure
	/var/log/audit/audit.log

2) is this a default install with eth0 at 192.168.0.254?

3) is /opt/ltsp/i386 exported via NFS?

	# exportfs
	/opt/ltsp/i386  192.168.0.0/255.255.255.0
	(and other similar lines)

4) try running this command and see if the problem goes away:

	# echo 0 > /selinux/enforce


-Eric

Attachment: signature.asc
Description: OpenPGP digital signature


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]