[K12OSN] Router mystery
Les Mikesell
les at futuresource.com
Sun Mar 6 18:17:04 UTC 2005
On Sun, 2005-03-06 at 08:17, Ken Johnson wrote:
> I'm a newbie trying to test k12LTSP on my home network that consists of:
>
> cable modem --->Netgear MR814 Router--->PCs
>
> When I connect the k12LTSP server (eth1) to the router it doesn't see
> the Internet.
>
> When I connect the k12LTSP server (eth1) directly to the cable modem
> it DOES see the internet. Why?
This should work if the k12ltsp box is getting settings via DHCP in
both cases. One possible problem would be if the router is
set to NAT to 192.168.0.0/24 and the k12ltsp box is also using
192.168.0.0/24 on eth0. You can see this with:
ifconfig -a
after getting a dhcp address from the router. The two interfaces
much have different subnet numbers. You can change either one
but if you going to test k12ltsp and reinstall often you might
want to leave the default there and change the one on the
router. The router should have a web interface for this and
any other number in the 3rd position (192.168.x.1 for the router,
192.168.x.0/24 - netmask 255.255.255.0 for the net) will work.
--
Les Mikesell
les at futuresource.com
More information about the K12OSN
mailing list