[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [K12OSN] Solving the bandwidth bottleneck



> yes, you could connect the 2 switches to your 2 nics and 
> split the load.
> 
> Just make sure you don't then connect the 2 switches together.
> 
> AND, make sure you pick different subnets for the 2 networks.
> 
> Something like 192.168.0.x for eth0, an 192.168.1.x for eth1 
> would work, assuming your netmask is 255.255.255.0
> 
> Although i'd be pretty surprised if you are utilizing all of 
> the 1gbit link between the server and 1 switch.  Again, 
> assuming the switch has a 1gbit port.  If not, that would be 
> a great way to resolve your bandwidth problem.

I assume that then you don't have to make any changes to lts.conf or
dhcpd.conf and all traffic will just find its way back out the
requesting port?  If so cool.


-- 
This message has been scanned for viruses and
dangerous content by the Cotter Technology 
Department, and is believed to be clean.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]