[K12OSN] Blocked net access
John Lucas
mrjohnlucas at gmail.com
Fri Jan 12 11:31:25 UTC 2007
On Friday 12 January 2007 04:32, Nakashima wrote:
> Hi all,
> New install of K12LTSP 6 taking all defaults.
> Both Windows and Mac OS boxes connected to Eth0 switch can't get to the
> net.
> Clients connected to Eth0 switch have no problem getting to the net.
> Any ideas?
> Thanks :-)
> --Peter
>
Yes. Unless changes are made, your LTSP server is not set up as a router and
won't pass packets from the "inside" network to the "outside" network. The
terminals run processes on the server, which has access to both networks, but
non-terminals attached to the "inside" do not have access to the outside.
To keep the PCs on the inside and allow them out, you need to make several
changes:
- turn on packet forwarding on the server (make it a router)
- give the server's inside address as a router in the DHCP stanza for the PCs
- make sure you don't have an IPTables rule preventing forwarding
- make sure your perimeter router knows the route back to the inside network
- make sure your perimeter firewall allows the inside network to forward
This is all basic TCP/IP networking 101 and is not specific to LTSP.
--
"History doesn't repeat itself; at best it rhymes."
- Mark Twain
| John Lucas MrJohnLucas at gmail.com |
| St. Thomas, VI 00802 http://mrjohnlucas.googlepages.com/ |
| 18.3°N, 65°W AST (UTC-4) |
More information about the K12OSN
mailing list