[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] PXE Files missing in Version 6

On 3/23/07, Peter Scheie <peter scheie homedns org> wrote:

> I've got one other question. The box I'm working on has an on-board
> Gigabit NIC and I added a 3Com 10/100 NIC. I would like for the on-board
> nic to be eth0 and serve the terminals and the 3Com to be eth1 and
> connect to our lan. But, when I installed the OS, it defaulted the other
> way. Is there a fairly simple way to switch them?
In /etc/sysconfig/network-scripts/ you'll find ifcfg-eth0 and ifcfg-eth1.  In each of
those you can specify the MAC address of the card you want the script to control.  The
syntax is


Adjust the above address to fit your cards, and use the respective address for each card.

Thanks Petre,
I had thought about this problem before. If you have verified that
this does work, I think it would be a prime item for the wiki.

Robert Arkiletian
Eric Hamber Secondary, Vancouver, Canada
Fl_TeacherTool http://www3.telus.net/public/robark/Fl_TeacherTool/
C++ GUI tutorial http://www3.telus.net/public/robark/

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]