[K12OSN] Network Printing

[David Hopkins]

The way you have it defined 192.168.1.1/255.255.255.0 with gateway of
192.168.0.254 puts it on a separate network, right, so would need some
routing to occur to reach it?  If you define it as
192.168.0.10/255.255.255.0 (I0 because I forget if 0.1 is used for something
else, and if the clients are 192.168.1 or 192.168.0 for the base network and
think the DHCP range is above 100?), does that work?  This could be bad
advice, but ... others will correct if so, I know that much.

On 9/4/07, Kemp, Levi <lnkemp at bolivar.k12.mo.us> wrote:
>
> I apologize for not giving this message a subject.
>
> Levi Kemp
> Technology Specialist
> Bolivar R-1 Schools
> 417-328-8943
> lnkemp at bolivar.k12.mo.us
>
>
>
> -----Original Message-----
> From: k12osn-bounces at redhat.com on behalf of Kemp, Levi
> Sent: Tue 9/4/2007 1:45 PM
> To: Support list for open source software in schools.
> Subject: [K12OSN]
>
> I've got a printing setup question. I have a vague understanding if cups
> printing. And I can successfully setup a printer shared by a samba server.
> But I have a printer in the lab, and it is connected to the server directly
> with the terminals. I set the IP and subnet to be
> 192.168.1.1/255.255.255.0 with a gateway of 192.168.0.254 but I cannot
> seem to ping it. By the way it cannot DHCP or I would. Anythoughts on what
> to do? I do not want to run a cable just for it. Thanks.
>
>
> Levi Kemp
> Technology Specialist
> Bolivar R-1 Schools
> 417-328-8943
> lnkemp at bolivar.k12.mo.us
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/k12osn/attachments/20070904/d5dcf20b/attachment.htm>