[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] Network Printing



The way you have it defined 192.168.1.1/255.255.255.0 with gateway of 192.168.0.254 puts it on a separate network, right, so would need some routing to occur to reach it?  If you define it as 192.168.0.10/255.255.255.0 (I0 because I forget if 0.1 is used for something else, and if the clients are 192.168.1 or 192.168.0 for the base network and think the DHCP range is above 100?), does that work?  This could be bad advice, but ... others will correct if so, I know that much.

On 9/4/07, Kemp, Levi <lnkemp bolivar k12 mo us> wrote:
I apologize for not giving this message a subject.

Levi Kemp
Technology Specialist
Bolivar R-1 Schools
417-328-8943
lnkemp bolivar k12 mo us



-----Original Message-----
From: k12osn-bounces redhat com on behalf of Kemp, Levi
Sent: Tue 9/4/2007 1:45 PM
To: Support list for open source software in schools.
Subject: [K12OSN]

I've got a printing setup question. I have a vague understanding if cups printing. And I can successfully setup a printer shared by a samba server. But I have a printer in the lab, and it is connected to the server directly with the terminals. I set the IP and subnet to be 192.168.1.1/255.255.255.0 with a gateway of 192.168.0.254 but I cannot seem to ping it. By the way it cannot DHCP or I would. Anythoughts on what to do? I do not want to run a cable just for it. Thanks.


Levi Kemp
Technology Specialist
Bolivar R-1 Schools
417-328-8943
lnkemp bolivar k12 mo us


_______________________________________________
K12OSN mailing list
K12OSN redhat com
https://www.redhat.com/mailman/listinfo/k12osn
For more info see < http://www.k12os.org>



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]