[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] LTSP server with 3 NICs? SOME SUCCESS!



Hello,

As you requested, I'm attaching the /etc/exports and also lts.conf
since I'm a bit confused as to how only to put one "server' line when
it is specific to a subnet.

#
# Copyright (c) 2002 by James A. McQuillan (McQuillan Systems, LLC)
#
# This software is licensed under the Gnu General Public License.
# The full text of which can be found at http://www.LTSP.org/license.txt
#
#
# Config file for the Linux Terminal Server Project (www.ltsp.org)
#

[Default]
        # IP address of the LTSP server
## changed below by Joseph Bishay
#        SERVER             = 192.168.0.254
	SERVER             = 192.168.2.254
	SERVER             = 192.168.3.254

        # LTSP 4.2 now defaults to restricting the video driver to 90%
        # of the total memory available on the terminal. Setting this
        # somewhere between 90 and 100 may help terminals with a marginal
        # mount of memory, but it is probably a better idea to set
        # USE_NBD_SWAP=Y for such terminals (see examples below)
        XRAMPERC = 90

        # Video drivers for the terminals
        XSERVER            = "auto"
            # XFree 4 drivers: ati cirrus cyrix fbdev i128 i740 i810 mga
            #      neomagic nv r128 radeon rendition s3 s3virge savage
            #      siliconmotion sis tdfx tga trident tseng vesa vga via

	X4_MODULE_01 = glx
            # add the GLX module by default, blender and the like need it


    ## Uncomment the following line to enable remote monitoring/control of
    ## terminals, especially if you use fl_teachertool:
	# X4_MODULE_02 = vnc

        # Mice drivers for the terminals
	X_MOUSE_PROTOCOL   = "auto"
 	X_USBMOUSE_PROTOCOL = "auto"
            # Mouse protocols: ExplorerPS/2 GlidePoint GlidePointPS/2
            #      IMPS/2 IntelliMouse Microsoft MouseManPlusPS/2
            #      NetMousePS/2 NetScrollPS/2 PS/2 ThinkingMouse
            #      ThinkingMousePS/2 usb
	X_MOUSE_DEVICE     = "/dev/psaux"
 	X_USBMOUSE_DEVICE   = "/dev/input/mice"
	X_MOUSE_RESOLUTION = 400
 	X_USBMOUSE_RESOLUTION = 400
	X_MOUSE_BUTTONS    = 3
 	X_USBMOUSE_BUTTONS   = 3
 	USBEMULATE_3_BUTTONS = "off"

        # Keyboards
        XkbSymbols         = "us(pc101)"
        XkbModel           = "pc101"
        XkbLayout          = "us"
            # Example of setting a different (German) keyboard mapping,
            #    XkbLayout = "de"
            # also see:
            #   http://www.xfree86.org/current/XKB-Config2.html
            #   http://www.ltsp.org/documentation/ltsp-3.0-4-en.html#AEN1213
            #   /opt/ltsp/i386/usr/X11R6/lib/X11/xkb/rules/xfree86.lst
            #   (/opt/ltsp/i386/usr/X11R6/lib/X11/xkb/symbols/)
            #   (/opt/ltsp/i386/usr/X11R6/lib/X11/xkb/keymap/xfree86)

	USE_XFS            = N
	LOCAL_APPS         = N
	SCREEN_01          = startx
	#SCREEN_02          = shell
	#SCREEN_03          = telnet
		# TELNET_HOST = 192.168.0.254
	#SCREEN_04          = rdesktop
		# RDP_SERVER = your.2k.server
		# RDP_OPTIONS = -F -u fred -d ltsp

       # local storage device (USB keys, cdrom, etc)
       LOCAL_STORAGE = Y
       LTSPFSD_OPTIONS=""

	# uncomment the following line to enable SNMP support
	#SNMPD = Y

        # enable sound by default
        SOUND              = Y
        # choose either esd or nasd to be the default (esd only on x86_64)
	SOUND_DAEMON       = "esd"
	# SOUND_DAEMON     = "nasd"

        # default sound volume
        VOLUME             = 75

        ### For ISA sound cards, you have to specify the module to use:
        # SMODULE_01       = "sb io=0x220 irq=5 dma=1"

Rest was commented out so I didn't paste it to save space.

-------------------------------------------------------------

/etc/exports

## LTS-begin ##
#
# The lines between the 'LTS-begin' and the 'LTS-end' were added
# on: Wed Nov 28 11:19:42 PST 2001 by the ltsp installation script.
# For more information, visit the ltsp homepage
# at http://www.ltsp.org
#

## Modified the below to reflect the new network address - Joseph
Bishay - December 24, 2008

# Original below:
# /opt/ltsp/i386            192.168.0.0/255.255.255.0(ro,no_root_squash,sync)
# /var/opt/ltsp/swapfiles   192.168.0.0/255.255.255.0(rw,no_root_squash,async)


# New for subnet 1
/opt/ltsp/i386            192.168.2.0/255.255.255.0(ro,no_root_squash,sync)
/var/opt/ltsp/swapfiles   192.168.2.0/255.255.255.0(rw,no_root_squash,async)

# New for subnet 2
/opt/ltsp/i386            192.168.3.0/255.255.255.0(ro,no_root_squash,sync)
/var/opt/ltsp/swapfiles   192.168.3.0/255.255.255.0(rw,no_root_squash,async)



#
# The following entries need to be uncommented if you want
# Local App support in ltsp
#
#/home                    192.168.0.0/255.255.255.0(rw,root_squash,sync)


## LTS-end ##

## LTS-begin ##
#
# The lines between the 'LTS-begin' and the 'LTS-end' were added
# on: Wed Nov 28 11:19:42 PST 2001 by the ltsp installation script.
# For more information, visit the ltsp homepage
# at http://www.ltsp.org
#


## Original below:
#/usr/X11R6/lib/X11/fonts   192.168.0.0/255.255.255.0(ro,no_root_squash,sync)
#/usr/share/AbiSuite/fonts  192.168.0.0/255.255.255.0(ro,no_root_squash,sync)
#/usr/share/fonts           192.168.0.0/255.255.255.0(ro,no_root_squash,sync)
#/usr/lib/openoffice/share/fonts
192.168.0.0/255.255.255.0(ro,no_root_squash,sync)

## New for subnet 1
/usr/X11R6/lib/X11/fonts   192.168.2.0/255.255.255.0(ro,no_root_squash,sync)
/usr/share/AbiSuite/fonts  192.168.2.0/255.255.255.0(ro,no_root_squash,sync)
/usr/share/fonts           192.168.2.0/255.255.255.0(ro,no_root_squash,sync)
/usr/lib/openoffice/share/fonts
192.168.2.0/255.255.255.0(ro,no_root_squash,sync)

## New for subnet 2
/usr/X11R6/lib/X11/fonts   192.168.3.0/255.255.255.0(ro,no_root_squash,sync)
/usr/share/AbiSuite/fonts  192.168.3.0/255.255.255.0(ro,no_root_squash,sync)
/usr/share/fonts           192.168.3.0/255.255.255.0(ro,no_root_squash,sync)
/usr/lib/openoffice/share/fonts
192.168.3.0/255.255.255.0(ro,no_root_squash,sync)


## LTS-end ##


## LTS-end ##

## LTS-begin ##
#
# The lines between the 'LTS-begin' and the 'LTS-end' were added
# on: Wed Nov 28 11:19:42 PST 2001 by the ltsp installation script.
# For more information, visit the ltsp homepage
# at http://www.ltsp.org
#

/opt/ltsp/ppc            192.168.0.0/255.255.255.0(ro,no_root_squash,sync)

## LTS-end ##


Thank you
Joseph


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]