[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] pxe-e53



Check that the dhcp server you think you are using is the only one the
client can see. The client may display the server IP address it got it's
IP address from on it's screen.
On Tue, 2008-06-03 at 09:14 +0700, Fajar Adianto wrote:
> Some of my ltsp clients use network card with pxe, and work fine. But
> today, a client with new installed pxe card fail to boot. The screen
> message is PXE-E53: no boot filename received. Line
> in /var/log/messages shows that it did get IP number from server. 
> What should be wrong?
> 
> -- 
> This message has been scanned for viruses and 
> dangerous content by MailScanner, and is 
> believed to be clean. 
> _______________________________________________
> K12OSN mailing list
> K12OSN redhat com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
-- 
James P. Kinney III          
CEO & Director of Engineering 
Local Net Solutions,LLC                           
http://www.localnetsolutions.com

GPG ID: 829C6CA7 James P. Kinney III (M.S. Physics)
<jkinney localnetsolutions com>
Fingerprint = 3C9E 6366 54FC A3FE BA4D 0659 6190 ADC3 829C 6CA7


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]