[K12OSN] [Re: K12OSN] NAT and connections through it.

[Doug Simpson]

Don't have a gui, but. . .

This is what I get then I do route:

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.100.0   *               255.255.255.0   U     0      0        0 eth0
10.40.12.0      *               255.255.252.0   U     0      0        0 eth1
169.254.0.0     *               255.255.0.0     U     0      0        0 eth1
default         10.40.12.5      0.0.0.0         UG    0      0        0 eth1

Looks like it should work, right?

DS

Doug Simpson
Technology Specialist
De Queen Public Schools
De Queen, AR
simpsond at leopards.k12.ar.us
"A Dollar Saved is a Dollar Earned"


>>> Barry Cisna <cisna-barry at wc235.k12.il.us> 1/28/2009 7:46 AM >>>
Doug,

Add a static route via the system-config-network gui.
Select eth1,>Edit,then 'route' tab,,>ADD,
---------------------------------------------------
Address 10.40.1.0
Subnet  255.255.255.0
Gateway <k12ltspserveripaddress> # of eth1 nic
---------------------------------------------------
Then,,,
'service network restart'

This can be done on top of your natting config.
If you do not have netbios_conntrack module loaded via iptables you will
have to load this. I believe in FC3 this is setup by default?This
required for say winders boxes to work seamlessly.

Barry Cisna


_______________________________________________
K12OSN mailing list
K12OSN at redhat.com 
https://www.redhat.com/mailman/listinfo/k12osn 
For more info see <http://www.k12os.org>