[K12OSN] Printer problems

[julius at turtle.com]

I seem to have better luck with  
PRINTER_0_TYPE = S
when the printer is USB

----- Original Message -----
From: "Support list for open source software in schools." 
To:"K12LTSP Mailing List" 
Cc:
Sent:Mon, 21 Jan 2013 06:46:52 -0600
Subject:Re: [K12OSN] Printer problems

 Todd,

 Do you have the following line(s) for this client in your lts.conf ?
 (you showed only the one line lts.conf config in your post)

 1)

 [MA:CD:DR:ES:SS:SS(myclient)]
 PRINTER_0_DEVICE=/dev/usb/lp0 (or /dev/usblp0)
 PRINTER_0_TYPE=U

 On the TC drop to a shell and do 
 ls -la /dev/usb/

 You should see /lp#

 2) Asking the obvious . You did add the driver for this printer to
the
 server? Did this printer work alright connected to the server
itself?

 3) What brand of printer is it. 
 Some Lexmark printers are very difficult to get working on ltsp,or
any
 Linux distro for that matter.

 Take Care,
 Barry

 _______________________________________________
 K12OSN mailing list
 K12OSN at redhat.com
 https://www.redhat.com/mailman/listinfo/k12osn
 For more info see 
This email is confidential and intended solely for the use of the
individual to whom it is addressed. Please note, any views or
opinions presented in this email are solely those of the author and
do not necessarily represent those of Turtle & Hughes, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/k12osn/attachments/20130121/792e32b5/attachment.htm>