[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] Printer problems



I seem to have better luck with 
PRINTER_0_TYPE = S
when the printer is USB


----- Original Message -----
From:
"Support list for open source software in schools." <k12osn redhat com>

To:
"K12LTSP Mailing List" <k12osn redhat com>
Cc:

Sent:
Mon, 21 Jan 2013 06:46:52 -0600
Subject:
Re: [K12OSN] Printer problems


Todd,

Do you have the following line(s) for this client in your lts.conf ?
(you showed only the one line lts.conf config in your post)

1)

[MA:CD:DR:ES:SS:SS(myclient)]
PRINTER_0_DEVICE=/dev/usb/lp0 (or /dev/usblp0)
PRINTER_0_TYPE=U

On the TC drop to a shell and do
ls -la /dev/usb/

You should see /lp#

2) Asking the obvious . You did add the driver for this printer to the
server? Did this printer work alright connected to the server itself?

3) What brand of printer is it.
Some Lexmark printers are very difficult to get working on ltsp,or any
Linux distro for that matter.

Take Care,
Barry





_______________________________________________
K12OSN mailing list
K12OSN redhat com
https://www.redhat.com/mailman/listinfo/k12osn
For more info see <http://www.k12os.org>
This email is confidential and intended solely for the use of the individual to whom it is addressed. Please note, any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Turtle & Hughes, Inc.

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]