[K12OSN] Local priner problem

[julius at turtle.com]

No, you don't need cups in the lts tree. The print services run on the
server.
Julius 

----- Original Message -----
From: "Radek Bursztynowski"  "Support list for open source software
in schools." 
To:"Support list for open source software in schools." 
Cc:
Sent:Tue, 5 Mar 2013 22:36:04 +0100
Subject:Re: [K12OSN] Local priner problem

 The printer is connected to thin client via USB.

 So, should I install cups package in the chroot and run cups service
on
 thin client?

 Best regards,
 Radek

 --
 > It seems you were able to connect to port 9100, so the print
server part must be working.
 > You said the printer is a Parallel Port one, correct? If that is
the case, you need to make sure your client is loading the parallel
port driver kernel module and the /dev/lp0 exists.
 > 
 > 
 > _______________________________________________
 > K12OSN mailing list
 > K12OSN at redhat.com
 > https://www.redhat.com/mailman/listinfo/k12osn
 > For more info see 

 _______________________________________________
 K12OSN mailing list
 K12OSN at redhat.com
 https://www.redhat.com/mailman/listinfo/k12osn
 For more info see 
This email is confidential and intended solely for the use of the
individual to whom it is addressed. Please note, any views or
opinions presented in this email are solely those of the author and
do not necessarily represent those of Turtle & Hughes, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/k12osn/attachments/20130305/55d8d67b/attachment.htm>