[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

failure to recognize network config in ks.cfg



Hi,
 
I'm running RHEL 4 U1 AS.  I got my kickstart working with PXE, TFTP, DHCP, NFS, etc.  I'm able to see my kickstart config file and most of the config is picked up during the install, except for the network config.  I get prompted to choose which NIC to configure and then I have to specify the configuration.  After that, the install goes pretty well, but I need to be able to automate the NIC configuration piece.  Here is the network line from my kickstart file (all one line):
 
network --device eth0 --bootproto static --ip 10.1.182.62 --netmask 255.255.255.0 --gateway 10.1.182.1 --nameserver 10.1.180.226 --hostname host1
 
The machine that is being built is an HP DL380 w/2 GigE NIC cards.
 
Any help would be greatly appreciated.
 

Thanks,
John

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]