Red Hat ES 4 Kickstart does not find e1000

Thu Apr 12 16:34:24 UTC 2007

Hi,
I have successfully built this Supermicro X7DVL-E system with kickstart 
under Red Hat ES 3 update 8 but when I change to Red Hat ES 4 it fails 
to find any network devices so it can't download the ks.cfg file from my 
NFS server.

This is the console output

 Linux version 2.6.9-34.EL (bhcompile at hs20-bc1-1.build.redhat.com) (gcc 
version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Fri Feb 24 16:46:41 EST 2006
 BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 0000000000089000 (usable)
  BIOS-e820: 0000000000089000 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 00000000cff60000 (usable)
  BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data)
  BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS)
  BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
 No mptable found.
 DMI present.
 ACPI: PM-Timer IO Port: 0x1008
 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
 Processor #0 6:15 APIC version 16
 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
 Processor #6 6:15 APIC version 16
 WARNING: NR_CPUS limit of 1 reached. Processor ignored.
 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
 Processor #1 6:15 APIC version 16
 WARNING: NR_CPUS limit of 1 reached. Processor ignored.
 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
 Processor #7 6:15 APIC version 16
 WARNING: NR_CPUS limit of 1 reached. Processor ignored.
 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
 ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
 ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
 Setting APIC routing to flat
 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
 IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
 Using ACPI (MADT) for SMP configuration information
 Checking aperture...
 Built 1 zonelists
 Kernel command line: load_ramdisk=1 console=ttyS0,38400 
initrd=initrd.gold4.0-x86_64.img network 
ks=nfs:brscs05.brs.infineon.com:/view/pxebuild/vob_tags/projects/pxebuild/kickstart/supermicro-x86_64-gold4.0.cfg 
ksdevice=eth0 lang= devfs=nomount ramdisk_size=9216 ide4=0 ide5=0
 ide_setup: ide4=0

 ide_setup: ide5=0

 Initializing CPU#0
 PID hash table entries: 4096 (order: 12, 131072 bytes)
 time.c: Using 3.579545 MHz PM timer.
 time.c: Detected 3000.219 MHz processor.
 time.c: Using PIT/TSC based timekeeping.
 Console: colour VGA+ 80x25
 Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
 Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
 Placing software IO TLB between 0xa32b000 - 0xe32b000
 Memory: 8161952k/9175040k available (2406k kernel code, 225180k 
reserved, 1306k data, 164k init)
 Calibrating delay using timer specific routine.. 6006.45 BogoMIPS 
(lpj=3003227)
 Security Scaffold v1.0.0 initialized
 SELinux:  Initializing.
 SELinux:  Starting in permissive mode
 There is already a security framework initialized, register_security 
failed.
 selinux_register_security:  Registering secondary module capability
 Capability LSM initialized as secondary
 Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
 CPU: L1 I cache: 32K, L1 D cache: 32K
 CPU: L2 cache: 4096K
 using mwait in idle threads.
 MCE: warning: using only 6 banks
 CPU: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 06
 Using IO APIC NMI watchdog
 activating NMI Watchdog ... done.
 testing NMI watchdog ... OK.
 Using local APIC timer interrupts.
 Detected 20.834 MHz APIC timer.
 checking if image is initramfs...it isn't (no cpio magic); looks like 
an initrd
 NET: Registered protocol family 16
 PCI: Using configuration type 1
 PCI: Using MMCONFIG at e0000000
 mtrr: v2.0 (20020519)
 ACPI: Subsystem revision 20040816
 ACPI: Interpreter enabled
 ACPI: Using IOAPIC for interrupt routing
 ACPI: PCI Root Bridge [PCI0] (00:00)
 PCI: Probing PCI hardware (bus 00)
 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
 PCI: Transparent bridge - 0000:00:1e.0
 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9
 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
 ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
 ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
 usbcore: registered new driver usbfs
 usbcore: registered new driver hub
 PCI: Using ACPI for IRQ routing
 ACPI: PCI interrupt 0000:00:00.0[A] -> GSI 16 (level, low) -> IRQ 169
 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 169
 ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 177
 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
 ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
 ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 177
 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
 ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 185
 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 193
 ACPI: PCI interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 193
 ACPI: PCI interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 185
 ACPI: PCI interrupt 0000:07:01.0[A] -> GSI 18 (level, low) -> IRQ 193
 PCI: Cannot allocate resource region 0 of device 0000:00:08.0
 PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
 Simple Boot Flag at 0x36 set to 0x1
 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
 audit: initializing netlink socket (disabled)
 audit(1176390470.710:1): initialized
 Total HugeTLB memory allocated, 0
 VFS: Disk quotas dquot_6.5.1
 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
 SELinux:  Registering netfilter hooks
 Initializing Cryptographic API
 ksign: Installing public key data
 Loading keyring
 - Added public key 7A8610E3876AC431
 - User ID: Red Hat, Inc. (Kernel Module GPG key)
 pci_hotplug: PCI Hot Plug PCI Core version: 0.5
 ACPI: Processor [CPU0] (supports C1, 8 throttling states)
 Real Time Clock Driver v1.12
 Linux agpgart interface v0.100 (c) Dave Jones
 serio: i8042 AUX port at 0x60,0x64 irq 12
 serio: i8042 KBD port at 0x60,0x64 irq 1
 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
 ÿttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
 ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
 RAMDISK driver initialized: 16 RAM disks of 9216K size 1024 blocksize
 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 ESB2: IDE controller at PCI slot 0000:00:1f.1
 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
 ESB2: chipset revision 9
 ESB2: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:pio, hdb:DMA
 hdb: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive
 Using cfq io scheduler
 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
 ide4: I/O resource 0x0-0x7 not free.
 ide4: ports already in use, skipping probe
 ide5: I/O resource 0x0-0x7 not free.
 ide5: ports already in use, skipping probe
 hdb: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
 Uniform CD-ROM driver Revision: 3.20
 ide-floppy driver 0.99.newide
 usbcore: registered new driver hiddev
 usbcore: registered new driver usbhid
 drivers/usb/input/hid-core.c: v2.0:USB HID core driver
 mice: PS/2 mouse device common for all mice
 input: AT Translated Set 2 keyboard on isa0060/serio0
 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
 NET: Registered protocol family 2
 IP: routing cache hash table of 16384 buckets, 896Kbytes
 TCP: Hash tables configured (established 524288 bind 37449)
 Initializing IPsec netlink socket
 NET: Registered protocol family 1
 NET: Registered protocol family 17
 ACPI: (supports S0 S1 S4 S5)
 ACPI wakeup devices:
 BPD0 BPD2 BMF3 PEX0 USB1 USB2 USB3 USB4 EUSB PCIB KBC0 MSE0 COM1 COM2
 md: Autodetecting RAID arrays.
 md: autorun ...
 md: ... autorun DONE.
 RAMDISK: Compressed image found at block 0
 VFS: Mounted root (ext2 filesystem).
 9;0]8]Greetings.
anaconda installer init version 10.1.1.37 starting
mounting /proc filesystem... done
mounting /dev/pts (unix98 pty) filesystem... done
mounting /sys filesystem... done
anaconda installer init version 10.1.1.37 using a serial console
remember, cereal is an important part of a nutritionally balanced 
breakfast.

trying to remount root filesystem read write... done
mounting /tmp as ramfs... done
running install...
running /sbin/loader

-- 

Cheers

Richard Skelton
Richard.Skelton at infineon.com
Infineon Technologies UK Ltd
Infineon House
Great Western Court
Hunts Ground Road
Stoke Gifford
Bristol
BS34 8HP
Tel +44(0)117 9528808