USB devices not being seen in anaconda during RHEL4 kickstart

[Al Alder]

Yep, I understand you have to stay with 4.7.
In addition to Chip's solution, you might want to
use the 5.3 initrd image on your USB stick and
you would have to modify the 5.3 initrd image to
specify your kickstart image instead of the 5.3 one.
Just something you might want to consider if you
have problems with Chip's solution.
Whatever you do that works, please post what you
did.

On Fri, Mar 13, 2009 at 1:55 PM, Ben <bda20 at cam.ac.uk> wrote:

> On Fri, 13 Mar 2009, Al Alder wrote:
>
>  Had a very similar problem with some HP servers and RHEL 4.  RHEL 4 did
>> not recognize the disk controller in the newer HP machines.  Our solution
>> was to go to RHEL 4.6 which had the driver for the newer disk controllers.
>> So you are running into a similar problem with your USB stick.  RHEL5.3
>> works because its initrd image has the driver for the USB.  You can
>>
>> 1) rebuild your initrd image with the USB driver
>> 2) just use RHEL 5.3
>>
>> I investigated number 1, but couldn't find any documentation that
>> explained how to that for the initial install boot initrd.  Am sure I could
>> have monkeyed with it and gotten it to work if I had had the time.
>>
>
> I'm not sure I want to get into rolling my own special initrd, but needs
> must and all that.
>
>
>  We went with our option 2 and had to upgrade everything to RHEL 4.6.
>>
>
> I can't use RHEL5.x I'm afraid.  The software that goes on top of the OS is
> currently only certified for RHEL4.  And as it is I'm using RHEL4 update 7,
> so theoretically I've got the most up-to-date support for devices that the
> RHEL4 stream offers.
>
> I wonder what's different about this USB controller Vs all USB controllers
> before it...
>
> My current plan on Monday is to try Chip Shabazian's suggestion of wrapping
> the ks.cfg up in the initrd.img and seeing if that works.  I'm still
> listening out for suggestions and experience of other people with RHEL4 and
> Sun x4X40 servers.  In case it matters x4100M2, x4200M2 and x4600M2 servers
> work perfectly well with USB kickstarted RHEL4 (-:
>
> Ben
> --
> Unix Support, MISD, University of Cambridge, England
> Plugger of wire, typer of keyboard, imparter of Clue
>        Life Is Short.          It's All Good.
>
> _______________________________________________
> Kickstart-list mailing list
> Kickstart-list at redhat.com
> https://www.redhat.com/mailman/listinfo/kickstart-list
>



-- 
Later,

Al Alder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/kickstart-list/attachments/20090313/42ad6462/attachment.htm>