[Libguestfs] failure converting Linux ESX guest to KVM hypervisor
Richard W.M. Jones
rjones at redhat.com
Thu Dec 8 12:02:42 UTC 2011
On Wed, Dec 07, 2011 at 04:19:21PM -0500, John Kienle wrote:
>
>
> Hi,
>
> I am experiencing a failure running virt-v2v to convert a Linux guest
> on an ESX host to a RedHat KVM hypervisor. The output with the failure
> follows. Any help/guidance is appreciated.
>
> [root at storage-024 ~]# virt-v2v -ic esx://<ip address>/?no_verify=1 -op
> transferimages --bridge br0 dev-03 > /tmp/virt-v2v.output
> error from Term::ReadKey::GetTerminalSize(): Unable to get Terminal Size.
> The TIOCGWINSZ ioctl didn't work. The COLUMNS and LINES environment
> variables didn't work. The resize program didn't work.
> at /usr/lib64/perl5/vendor_perl/Term/ReadKey.pm line 362.
> guessing terminal width 50
> dev-03_dev-03: 100% [==================]D 0h24m34s
> libguestfs: trace: add_drive_opts "/local/transferimages/dev-03_dev-03"
> "iface:ide"
> libguestfs: trace: add_drive_opts = 0
> libguestfs: trace: add_drive_ro_with_if "/var/lib/virt-v2v/transfer.iso"
> "ide"
> libguestfs: trace: add_drive_ro_with_if = 0
> libguestfs: trace: set_network true
> libguestfs: trace: set_network = 0
> libguestfs: trace: launch
> Using CPU model "cpu64-rhel6"
> libguestfs: trace: launch = 0
> libguestfs: trace: set_autosync true
> libguestfs: trace: set_autosync = 0
> libguestfs: trace: list_devices
> libguestfs: trace: list_devices = ["/dev/sda", "/dev/sdb"]
> libguestfs: trace: mount_ro "/dev/sda" "/"
> libguestfs: trace: mount_ro = -1 (error)
> libguestfs: trace: umount_all
> libguestfs: trace: umount_all = 0
> libguestfs: trace: mount_ro "/dev/sdb" "/"
> libguestfs: trace: mount_ro = 0
> libguestfs: trace: umount_all
> libguestfs: trace: umount_all = 0
> libguestfs: trace: list_partitions
> libguestfs: trace: list_partitions = ["/dev/sda1", "/dev/sda2",
> "/dev/sda3"]
> libguestfs: trace: pvs
> libguestfs: trace: pvs = [""]
> libguestfs: trace: available "lvm2"
> libguestfs: trace: available = 0
> libguestfs: trace: lvs
> libguestfs: trace: lvs = [""]
> libguestfs: trace: file "/dev/sda1"
> libguestfs: trace: file = "Linux rev 1.0 ext3 filesystem data"
> libguestfs: trace: get_e2uuid "/dev/sda1"
> libguestfs: trace: get_e2uuid = "1a90f551-5635-4d8d-af60-810b82a45cda"
> libguestfs: trace: get_e2label "/dev/sda1"
> libguestfs: trace: get_e2label = "/boot"
> libguestfs: trace: mount_ro "/dev/sda1" "/"
> libguestfs: trace: mount_ro = 0
> libguestfs: trace: is_file "/grub/menu.lst"
> libguestfs: trace: is_file = 0
> libguestfs: trace: is_file "/grub/grub.conf"
> libguestfs: trace: is_file = 1
> libguestfs: trace: umount_all
> libguestfs: trace: umount_all = 0
> libguestfs: trace: file "/dev/sda2"
> libguestfs: trace: file = "Linux/i386 swap file (new style) 1 (4K pages)
> size 1024142 pages Label SWAP-sda2"
> libguestfs: trace: umount_all
> libguestfs: trace: umount_all = 0
> libguestfs: trace: file "/dev/sda3"
> libguestfs: trace: file = "Linux rev 1.0 ext3 filesystem data (large
> files)"
> libguestfs: trace: get_e2uuid "/dev/sda3"
> libguestfs: trace: get_e2uuid = "6c19c312-8cd2-44e7-acea-236758464c81"
> libguestfs: trace: get_e2label "/dev/sda3"
> libguestfs: trace: get_e2label = "/"
> libguestfs: trace: mount_ro "/dev/sda3" "/"
> libguestfs: trace: mount_ro = 0
> libguestfs: trace: is_file "/grub/menu.lst"
> libguestfs: trace: is_file = 0
> libguestfs: trace: is_file "/grub/grub.conf"
> libguestfs: trace: is_file = 0
> libguestfs: trace: is_dir "/etc"
> libguestfs: trace: is_dir = 1
> libguestfs: trace: is_dir "/bin"
> libguestfs: trace: is_dir = 1
> libguestfs: trace: is_file "/etc/fstab"
> libguestfs: trace: is_file = 1
> libguestfs: trace: exists "/etc/redhat-release"
> libguestfs: trace: exists = 1
> libguestfs: trace: cat "/etc/redhat-release"
> libguestfs: trace: cat = "Red Hat Enterprise Linux Server release 5.4
> (Tikanga)
> "
> libguestfs: trace: cat "/etc/fstab"
> libguestfs: trace: cat = "LABEL=/ /
> ext3 defaults 1 1
> LABEL=/boot /boot ext3 defaults 1 2
> tmpfs /dev/shm tmpfs defaults 0 0
> devpts /dev/pts devpts gid=5,mode=620 0 0
> sysfs /sys sysfs defaults 0 0
> proc /proc proc defaults 0 0
> LABEL=SWAP-sda2 swap swap defaults 0 0
> "
> libguestfs: trace: is_file "/bin/bash"
> libguestfs: trace: is_file = 1
> libguestfs: trace: file_architecture "/bin/bash"
> libguestfs: trace: file "/bin/bash"
> libguestfs: trace: file = "ELF 32-bit LSB executable, Intel 80386, version
> 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.9,
> stripped"
> libguestfs: trace: file_architecture = "i386"
> libguestfs: trace: umount_all
> libguestfs: trace: umount_all = 0
> libguestfs: trace: file "/dev/sdb"
> libguestfs: trace: file = "ISO 9660 CD-ROM filesystem data
> '__virt-v2v_transfer__ '"
> libguestfs: trace: mount_ro "/dev/sdb" "/"
> libguestfs: trace: mount_ro = 0
> libguestfs: trace: is_file "/grub/menu.lst"
> libguestfs: trace: is_file = 0
> libguestfs: trace: is_file "/grub/grub.conf"
> libguestfs: trace: is_file = 0
> libguestfs: trace: is_dir "/etc"
> libguestfs: trace: is_dir = 0
> libguestfs: trace: is_dir "/etc"
> libguestfs: trace: is_dir = 0
> libguestfs: trace: is_dir "/etc"
> libguestfs: trace: is_dir = 0
> libguestfs: trace: is_file "/AUTOEXEC.BAT"
> libguestfs: trace: is_file = 0
> libguestfs: trace: is_file "/autoexec.bat"
> libguestfs: trace: is_file = 0
> libguestfs: trace: is_dir "/Program Files"
> libguestfs: trace: is_dir = 0
> libguestfs: trace: is_dir "/WINDOWS"
> libguestfs: trace: is_dir = 0
> libguestfs: trace: is_file "/boot.ini"
> libguestfs: trace: is_file = 0
> libguestfs: trace: is_file "/ntldr"
> libguestfs: trace: is_file = 0
> libguestfs: trace: umount_all
> libguestfs: trace: umount_all = 0
> unknown filesystem label SWAP-sda2
> libguestfs: trace: mount_options "" "/dev/sda1" "/"
> libguestfs: trace: mount_options = 0
> libguestfs: trace: is_dir "/boot"
> libguestfs: trace: is_dir = 0
> libguestfs: trace: command_lines "rpm -q -a --qf %{name} %{epoch}
> %{version} %{release} %{arch}
> "
> libguestfs: trace: command_lines = NULL (error)
> Error running rpm -qa: command_lines: command_lines: rpm: No such file or
> directory at /usr/share/perl5/vendor_perl/Sys/VirtV2V/GuestfsHandle.pm line
> 188.
> at /usr/lib64/perl5/vendor_perl/Sys/Guestfs/Lib.pm line 1022
> libguestfs: trace: available "augeas"
> libguestfs: trace: available = 0
> libguestfs: trace: aug_init "/" 16
> libguestfs: trace: aug_init = 0
> libguestfs: trace: aug_match "/files//etc/grub.conf/title"
> libguestfs: trace: aug_match = [""]
> libguestfs: trace: aug_get "/files//etc/grub.conf/default"
> libguestfs: trace: aug_get = NULL (error)
> libguestfs: trace: aug_init "/" 16
> libguestfs: trace: aug_init = 0
> libguestfs: trace: aug_match "/files/etc/conf.modules/alias"
> libguestfs: trace: aug_match = [""]
> libguestfs: trace: aug_match "/files/etc/modules.conf/alias"
> libguestfs: trace: aug_match = [""]
> libguestfs: trace: aug_match "/files/etc/modprobe.conf/alias"
> libguestfs: trace: aug_match = [""]
> libguestfs: trace: aug_match "/files/etc/modprobe.d/*/alias"
> libguestfs: trace: aug_match = [""]
> libguestfs: trace: exists "/usr/sbin/load_policy"
> libguestfs: trace: exists = 0
> libguestfs: trace: aug_close
> libguestfs: trace: aug_close = 0
> libguestfs: trace: aug_init "/" 1
> libguestfs: trace: aug_init = 0
> libguestfs: trace: aug_match "/augeas/load/Grub/incl"
> libguestfs: trace: aug_match = ["/augeas/load/Grub/incl[1]",
> "/augeas/load/Grub/incl[2]"]
> libguestfs: trace: aug_get "/augeas/load/Grub/incl[1]"
> libguestfs: trace: aug_get = "/etc/grub.conf"
> libguestfs: trace: aug_get "/augeas/load/Grub/incl[2]"
> libguestfs: trace: aug_get = "/boot/grub/menu.lst"
> libguestfs: trace: aug_load
> libguestfs: trace: aug_load = 0
> libguestfs: trace: exists "/etc/conf.modules"
> libguestfs: trace: exists = 0
> libguestfs: trace: exists "/etc/modules.conf"
> libguestfs: trace: exists = 0
> libguestfs: trace: exists "/etc/modprobe.conf"
> libguestfs: trace: exists = 0
> libguestfs: trace: exists "/etc/modprobe.d"
> libguestfs: trace: exists = 0
> libguestfs: trace: umount_all
> libguestfs: trace: umount_all = 0
> libguestfs: trace: sync
> libguestfs: trace: sync = 0
> libguestfs: trace: kill_subprocess
> libguestfs: trace: kill_subprocess = 0
> virt-v2v: Unable to find any valid modprobe configuration
>
> Regards,
>
> John Kienle
> Emerging Technologies Solutions Development
> IBM T.J. Watson Research
What version of virt-v2v, libguestfs and host?
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
More information about the Libguestfs
mailing list