[Libguestfs] [PATCH 4/4] p2v: Add a test for the PXE boot path (RHBZ#1256222).
Richard W.M. Jones
rjones at redhat.com
Tue Aug 25 18:34:12 UTC 2015
Build the P2V disk image and boot it. We don't actually use PXE
specifically, but we do test the whole PXE / kernel command line path
much more thoroughly.
This is a 'check-slow' test because it takes ages to run.
---
.gitignore | 11 ++++
TODO | 8 +++
p2v/Makefile.am | 67 ++++++++++++++++++-
p2v/test-virt-p2v-pxe.sh | 120 +++++++++++++++++++++++++++++++++++
p2v/test-virt-p2v-pxe.sshd_config.in | 39 ++++++++++++
5 files changed, 244 insertions(+), 1 deletion(-)
create mode 100755 p2v/test-virt-p2v-pxe.sh
create mode 100644 p2v/test-virt-p2v-pxe.sshd_config.in
diff --git a/.gitignore b/.gitignore
index fb972a7..e502018 100644
--- a/.gitignore
+++ b/.gitignore
@@ -345,9 +345,20 @@ Makefile.in
/p2v/dependencies.redhat
/p2v/dependencies.suse
/p2v/launch-virt-p2v
+/p2v/stamp-test-virt-p2v-pxe-hostkey
+/p2v/stamp-test-virt-p2v-pxe-kernel
+/p2v/stamp-test-virt-p2v-pxe-userkey
/p2v/stamp-virt-p2v.pod
/p2v/stamp-virt-p2v-make-disk.pod
/p2v/stamp-virt-p2v-make-kickstart.pod
+/p2v/test-virt-p2v-pxe.id_rsa
+/p2v/test-virt-p2v-pxe.id_rsa.pub
+/p2v/test-virt-p2v-pxe.img
+/p2v/test-virt-p2v-pxe.initramfs
+/p2v/test-virt-p2v-pxe.sshd_config
+/p2v/test-virt-p2v-pxe.ssh_host_rsa_key
+/p2v/test-virt-p2v-pxe.ssh_host_rsa_key.pub
+/p2v/test-virt-p2v-pxe.vmlinuz
/p2v/virt-p2v
/p2v/virt-p2v.1
/p2v/virt-p2v-make-disk
diff --git a/TODO b/TODO
index 666400e..2b865b5 100644
--- a/TODO
+++ b/TODO
@@ -576,3 +576,11 @@ Subsecond handling in virt-diff, virt-ls
Handle nanoseconds properly. You should be able to specify them on
the command line and display them.
+
+virt-p2v
+--------
+
+virt-p2v-make-disk and virt-p2v-make-kickstart should have
+options to let you inject SSH identities, eg:
+
+ virt-p2v-make-disk [...] --inject-ssh-identity=id_rsa
diff --git a/p2v/Makefile.am b/p2v/Makefile.am
index 57efd8d..0652674 100644
--- a/p2v/Makefile.am
+++ b/p2v/Makefile.am
@@ -163,6 +163,71 @@ TESTS += \
test-virt-p2v.sh
endif ENABLE_APPLIANCE
+SLOW_TESTS = \
+ test-virt-p2v-pxe.sh
+
+check-slow: test-virt-p2v-pxe.img \
+ test-virt-p2v-pxe.vmlinuz test-virt-p2v-pxe.initramfs \
+ test-virt-p2v-pxe.sshd_config \
+ test-virt-p2v-pxe.ssh_host_rsa_key \
+ test-virt-p2v-pxe.ssh_host_rsa_key.pub \
+ test-virt-p2v-pxe.id_rsa test-virt-p2v-pxe.id_rsa.pub
+ $(MAKE) check TESTS="$(SLOW_TESTS)"
+
+test-virt-p2v-pxe.img: virt-p2v-make-disk \
+ virt-p2v \
+ test-virt-p2v-pxe.id_rsa
+ $(top_builddir)/run virt-p2v-make-disk -o $@-t fedora-22
+ $(top_builddir)/run guestfish -a $@-t -i \
+ upload test-virt-p2v-pxe.id_rsa /var/tmp/id_rsa
+ mv $@-t $@
+
+test-virt-p2v-pxe.vmlinuz test-virt-p2v-pxe.initramfs: stamp-test-virt-p2v-pxe-kernel
+
+stamp-test-virt-p2v-pxe-kernel: test-virt-p2v-pxe.img
+ rm -f $@ vmlinuz initramfs test-virt-p2v-pxe.vmlinuz test-virt-p2v-pxe.initramfs
+ $(top_builddir)/run virt-get-kernel --unversioned-names -a $<
+ mv vmlinuz test-virt-p2v-pxe.vmlinuz
+ mv initramfs test-virt-p2v-pxe.initramfs
+ touch $@
+
+test-virt-p2v-pxe.sshd_config: test-virt-p2v-pxe.sshd_config.in
+ rm -f $@ $@-t
+ @AWK@ \
+ -v "abs_builddir=$(abs_builddir)" \
+ '{ \
+ gsub (/__RANDOM_PORT__/, 10000 + int (1000 * rand())); \
+ gsub (/__abs_builddir__/, abs_builddir); \
+ print; \
+ }' < $< > $@-t
+ chmod 0444 $@-t
+ mv $@-t $@
+
+test-virt-p2v-pxe.ssh_host_rsa_key test-virt-p2v-pxe.ssh_host_rsa_key.pub: stamp-test-virt-p2v-pxe-hostkey
+
+stamp-test-virt-p2v-pxe-hostkey:
+ rm -f test-virt-p2v-pxe.ssh_host_rsa_key
+ rm -f test-virt-p2v-pxe.ssh_host_rsa_key.pub
+ ssh-keygen -t rsa -f test-virt-p2v-pxe.ssh_host_rsa_key -N ''
+ touch $@
+
+test-virt-p2v-pxe.id_rsa test-virt-p2v-pxe.id_rsa.pub: stamp-test-virt-p2v-pxe-userkey
+
+stamp-test-virt-p2v-pxe-userkey:
+ rm -f test-virt-p2v-pxe.id_rsa
+ rm -f test-virt-p2v-pxe.id_rsa.pub
+ ssh-keygen -t rsa -f test-virt-p2v-pxe.id_rsa -N ''
+ touch $@
+
+# Don't clean ssh_host_rsa_key{,.pub} or id_rsa{,.pub} since those
+# consume system entropy to regenerate.
+CLEANFILES += \
+ stamp-test-virt-p2v-pxe-kernel \
+ test-virt-p2v-pxe.img \
+ test-virt-p2v-pxe.vmlinuz \
+ test-virt-p2v-pxe.initramfs \
+ test-virt-p2v-pxe.sshd_config
+
EXTRA_DIST += \
- $(TESTS) \
+ $(TESTS) $(SLOW_TESTS) \
test-virt-p2v-ssh.sh
diff --git a/p2v/test-virt-p2v-pxe.sh b/p2v/test-virt-p2v-pxe.sh
new file mode 100755
index 0000000..f05cb96
--- /dev/null
+++ b/p2v/test-virt-p2v-pxe.sh
@@ -0,0 +1,120 @@
+#!/bin/bash -
+# libguestfs virt-p2v test script
+# Copyright (C) 2014-2015 Red Hat Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+# Test virt-p2v in non-GUI mode with something resembling the
+# PXE boot code path. This tests:
+# * virt-p2v-make-disk
+# * systemd p2v.service
+# * launch-virt-p2v
+# * networking
+# * virt-p2v in kernel command-line mode
+
+unset CDPATH
+export LANG=C
+set -e
+
+if [ -n "$SKIP_TEST_VIRT_P2V_PXE_SH" ]; then
+ echo "$0: test skipped because environment variable is set"
+ exit 77
+fi
+
+if [ "$(guestfish get-backend)" = "uml" ]; then
+ echo "$0: test skipped because UML backend does not support network"
+ exit 77
+fi
+
+if [ "$(uname -m)" != "x86_64" ]; then
+ echo "$0: test skipped because !x86_64"
+ exit 77
+fi
+
+qemu=qemu-system-x86_64
+if ! $qemu -help >/dev/null 2>&1; then
+ echo "$0: test skipped because $qemu not found"
+ exit 77
+fi
+
+img="test-virt-p2v-pxe.img"
+if ! test -f $img; then
+ echo "$0: test skipped because $img was not created"
+ exit 77
+fi
+
+guestsdir="$(cd ../tests/guests && pwd)"
+f="$guestsdir/windows.img"
+if ! test -f $f; then
+ echo "$0: test skipped because phony Windows image was not created"
+ exit 77
+fi
+
+virt_tools_data_dir=${VIRT_TOOLS_DATA_DIR:-/usr/share/virt-tools}
+if ! test -r $virt_tools_data_dir/rhsrvany.exe; then
+ echo "$0: test skipped because rhsrvany.exe is not installed"
+ exit 77
+fi
+
+d=test-virt-p2v-pxe.d
+rm -rf $d
+mkdir $d
+
+# Start the ssh server. Kill it if the script exits for any reason.
+# Note you must use an absolute path to exec sshd.
+`which sshd` -f test-virt-p2v-pxe.sshd_config -D &
+sshd_pid=$!
+cleanup ()
+{
+ kill $sshd_pid
+}
+trap cleanup INT QUIT TERM EXIT ERR
+
+# Get the randomly assigned sshd port number.
+port="$(grep ^Port test-virt-p2v-pxe.sshd_config | awk '{print $2}')"
+
+# Connect as the local user.
+username="$(id -un)"
+
+# Output storage path.
+os="$(cd $d; pwd)"
+
+# The Linux kernel command line.
+cmdline="root=/dev/sda3 ro console=ttyS0 printk.time=1 p2v.debug p2v.server=10.0.2.2 p2v.port=$port p2v.username=$username p2v.identity=file:///var/tmp/id_rsa p2v.name=windows p2v.o=local p2v.os=$os"
+
+# Run virt-p2v inside qemu.
+$qemu \
+ -nodefconfig \
+ -display none \
+ -machine accel=kvm:tcg \
+ -m 2048 \
+ -kernel test-virt-p2v-pxe.vmlinuz \
+ -initrd test-virt-p2v-pxe.initramfs \
+ -append "$cmdline" \
+ -boot c \
+ -device virtio-scsi-pci,id=scsi \
+ -drive file=$img,format=raw,snapshot=on,if=none,index=0,id=hd0 \
+ -device scsi-hd,drive=hd0 \
+ -drive file=$f,format=raw,snapshot=on,if=none,index=1,id=hd1 \
+ -device scsi-hd,drive=hd1 \
+ -netdev user,id=usernet \
+ -device virtio-net-pci,netdev=usernet \
+ -serial stdio
+
+# Test the libvirt XML metadata and a disk was created.
+test -f $d/windows.xml
+test -f $d/windows-sda
+
+rm -r $d
diff --git a/p2v/test-virt-p2v-pxe.sshd_config.in b/p2v/test-virt-p2v-pxe.sshd_config.in
new file mode 100644
index 0000000..d8b6203
--- /dev/null
+++ b/p2v/test-virt-p2v-pxe.sshd_config.in
@@ -0,0 +1,39 @@
+# libguestfs virt-p2v test script
+# @configure_input@
+# Copyright (C) 2014-2015 Red Hat Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+# Minimal sshd_config used by test-virt-p2v-pxe.ssh when it runs
+# a captive sshd.
+
+# Choose a random high port number.
+Port __RANDOM_PORT__
+
+# Only allow connections from loopback.
+ListenAddress [::1]
+ListenAddress 127.0.0.1
+
+# Privilege separation breaks non-root usage of sshd.
+UsePrivilegeSeparation no
+
+# Use local files instead of inaccessible global configuration.
+PidFile __abs_builddir__/test-virt-p2v-pxe.sshd.pid
+HostKey __abs_builddir__/test-virt-p2v-pxe.ssh_host_rsa_key
+
+AuthorizedKeysFile __abs_builddir__/test-virt-p2v-pxe.id_rsa.pub
+
+# Don't check file permissions.
+StrictModes no
--
2.5.0
More information about the Libguestfs
mailing list