[Libvir] PATCH: Make QEMU driver honour 'listen' flag for VNC
Daniel P. Berrange
berrange at redhat.com
Mon Jul 23 19:51:36 UTC 2007
On Mon, Jul 23, 2007 at 07:06:25PM +0100, Daniel P. Berrange wrote:
> In QEMU 0.9.0 or later it is possible to tell QEMU to only listen on a
> particular IP address. THis patch adapts the code so that it honours the
> 'listen' attribute on the <graphics> tag if using QEMU >= 0.9.0. It also
> re-enables the tests for this capability that I temporarily disabled.
There was a further complication of this. It turns out our handling of
headless VMs was broken -ie, VMs without any <graphics> tag all. We
specify -nographic on the command line. Unfortunately when you do this,
QEMU splatters any settings for monitor, serial or parallel device you
gave on the command line before the -nographic flag. Unfortunately again
we order -monitor pty before -nographic, so we fail to get a monitor
console setup correctly. This updated patch extends the previous so
that we have -nographic before all other args it might affect.
src/qemu_conf.c | 52 +++++++++++----
src/qemu_conf.h | 1
tests/qemuxml2argvdata/qemuxml2argv-boot-cdrom.args | 2
tests/qemuxml2argvdata/qemuxml2argv-boot-floppy.args | 2
tests/qemuxml2argvdata/qemuxml2argv-boot-network.args | 2
tests/qemuxml2argvdata/qemuxml2argv-clock-localtime.args | 2
tests/qemuxml2argvdata/qemuxml2argv-clock-utc.args | 2
tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom.args | 2
tests/qemuxml2argvdata/qemuxml2argv-disk-floppy.args | 2
tests/qemuxml2argvdata/qemuxml2argv-disk-many.args | 2
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args | 2
tests/qemuxml2argvdata/qemuxml2argv-input-usbmouse.args | 2
tests/qemuxml2argvdata/qemuxml2argv-input-usbtablet.args | 2
tests/qemuxml2argvdata/qemuxml2argv-minimal.args | 2
tests/qemuxml2argvdata/qemuxml2argv-misc-acpi.args | 2
tests/qemuxml2argvdata/qemuxml2argv-misc-no-reboot.args | 2
tests/qemuxml2argvdata/qemuxml2argv-net-user.args | 2
tests/qemuxml2argvtest.c | 4 -
tests/qemuxml2xmltest.c | 2
19 files changed, 59 insertions(+), 30 deletions(-)
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
-------------- next part --------------
Index: src/qemu_conf.c
===================================================================
RCS file: /data/cvs/libvirt/src/qemu_conf.c,v
retrieving revision 1.5
diff -u -p -r1.5 qemu_conf.c
--- src/qemu_conf.c 18 Jul 2007 21:47:47 -0000 1.5
+++ src/qemu_conf.c 23 Jul 2007 19:48:07 -0000
@@ -1197,14 +1197,23 @@ static struct qemud_vm_def *qemudParseXM
def->graphicsType = QEMUD_GRAPHICS_NONE;
} else if ((prop = xmlGetProp(obj->nodesetval->nodeTab[0], BAD_CAST "type"))) {
if (!strcmp((char *)prop, "vnc")) {
+ xmlChar *vncport, *vnclisten;
def->graphicsType = QEMUD_GRAPHICS_VNC;
- prop = xmlGetProp(obj->nodesetval->nodeTab[0], BAD_CAST "port");
- if (prop) {
+ vncport = xmlGetProp(obj->nodesetval->nodeTab[0], BAD_CAST "port");
+ if (vncport) {
conv = NULL;
- def->vncPort = strtoll((const char*)prop, &conv, 10);
+ def->vncPort = strtoll((const char*)vncport, &conv, 10);
} else {
def->vncPort = -1;
}
+ vnclisten = xmlGetProp(obj->nodesetval->nodeTab[0], BAD_CAST "listen");
+ if (vnclisten && *vnclisten)
+ strncpy(def->vncListen, (char *)vnclisten, BR_INET_ADDR_MAXLEN-1);
+ else
+ strcpy(def->vncListen, "127.0.0.1");
+ def->vncListen[BR_INET_ADDR_MAXLEN-1] = '\0';
+ xmlFree(vncport);
+ xmlFree(vnclisten);
} else if (!strcmp((char *)prop, "sdl")) {
def->graphicsType = QEMUD_GRAPHICS_SDL;
} else {
@@ -1511,6 +1520,18 @@ int qemudBuildCommandLine(virConnectPtr
if (!((*argv)[++n] = strdup(vcpus)))
goto no_memory;
+ /*
+ * NB, -nographic *MUST* come before any serial, or monitor
+ * or parallel port flags due to QEMU craziness, where it
+ * decides to change the serial port & monitor to be on stdout
+ * if you ask for nographic. So we have to make sure we override
+ * these stupid defaults ourselves
+ */
+ if (vm->def->graphicsType == QEMUD_GRAPHICS_NONE) {
+ if (!((*argv)[++n] = strdup("-nographic")))
+ goto no_memory;
+ }
+
if (!((*argv)[++n] = strdup("-monitor")))
goto no_memory;
if (!((*argv)[++n] = strdup("pty")))
@@ -1700,22 +1721,24 @@ int qemudBuildCommandLine(virConnectPtr
}
if (vm->def->graphicsType == QEMUD_GRAPHICS_VNC) {
- char port[10];
+ char vncdisplay[BR_INET_ADDR_MAXLEN+20];
int ret;
- ret = snprintf(port, sizeof(port),
- ((driver->qemuCmdFlags & QEMUD_CMD_FLAG_VNC_COLON) ?
- ":%d" : "%d"),
- vm->def->vncActivePort - 5900);
- if (ret < 0 || ret >= (int)sizeof(port))
+ if (driver->qemuCmdFlags & QEMUD_CMD_FLAG_VNC_COLON)
+ ret = snprintf(vncdisplay, sizeof(vncdisplay), "%s:%d",
+ vm->def->vncListen,
+ vm->def->vncActivePort - 5900);
+ else
+ ret = snprintf(vncdisplay, sizeof(vncdisplay), "%d",
+ vm->def->vncActivePort - 5900);
+ if (ret < 0 || ret >= (int)sizeof(vncdisplay))
goto error;
if (!((*argv)[++n] = strdup("-vnc")))
goto no_memory;
- if (!((*argv)[++n] = strdup(port)))
+ if (!((*argv)[++n] = strdup(vncdisplay)))
goto no_memory;
} else if (vm->def->graphicsType == QEMUD_GRAPHICS_NONE) {
- if (!((*argv)[++n] = strdup("-nographic")))
- goto no_memory;
+ /* Nada - we added -nographic earlier in this function */
} else {
/* SDL is the default. no args needed */
}
@@ -2931,6 +2954,11 @@ char *qemudGenerateXML(virConnectPtr con
qemudIsActiveVM(vm) && live ? def->vncActivePort : def->vncPort) < 0)
goto no_memory;
+ if (def->vncListen[0] &&
+ virBufferVSprintf(buf, " listen='%s'",
+ def->vncListen) < 0)
+ goto no_memory;
+
if (virBufferAdd(buf, "/>\n", -1) < 0)
goto no_memory;
break;
Index: src/qemu_conf.h
===================================================================
RCS file: /data/cvs/libvirt/src/qemu_conf.h,v
retrieving revision 1.4
diff -u -p -r1.4 qemu_conf.h
--- src/qemu_conf.h 18 Jul 2007 21:08:22 -0000 1.4
+++ src/qemu_conf.h 23 Jul 2007 19:48:07 -0000
@@ -186,6 +186,7 @@ struct qemud_vm_def {
int graphicsType;
int vncPort;
int vncActivePort;
+ char vncListen[BR_INET_ADDR_MAXLEN];
int ndisks;
struct qemud_vm_disk_def *disks;
Index: tests/qemuxml2argvtest.c
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvtest.c,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argvtest.c
--- tests/qemuxml2argvtest.c 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvtest.c 23 Jul 2007 19:48:07 -0000
@@ -146,11 +146,11 @@ main(int argc, char **argv)
1, testCompareXMLToArgvHelper, "disk-many") < 0)
ret = -1;
- if (0 && virtTestRun("QEMU XML-2-ARGV Graphics VNC",
+ if (virtTestRun("QEMU XML-2-ARGV Graphics VNC",
1, testCompareXMLToArgvHelper, "graphics-vnc") < 0)
ret = -1;
- if (0 && virtTestRun("QEMU XML-2-ARGV Graphics SDL",
+ if (virtTestRun("QEMU XML-2-ARGV Graphics SDL",
1, testCompareXMLToArgvHelper, "graphics-sdl") < 0)
ret = -1;
Index: tests/qemuxml2xmltest.c
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2xmltest.c,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2xmltest.c
--- tests/qemuxml2xmltest.c 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2xmltest.c 23 Jul 2007 19:48:07 -0000
@@ -111,7 +111,7 @@ main(int argc, char **argv)
1, testCompareXMLToXMLHelper, "disk-many") < 0)
ret = -1;
- if (0 && virtTestRun("QEMU XML-2-ARGV Graphics VNC",
+ if (virtTestRun("QEMU XML-2-ARGV Graphics VNC",
1, testCompareXMLToXMLHelper, "graphics-vnc") < 0)
ret = -1;
Index: tests/qemuxml2argvdata/qemuxml2argv-boot-cdrom.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-boot-cdrom.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-boot-cdrom.args
--- tests/qemuxml2argvdata/qemuxml2argv-boot-cdrom.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-boot-cdrom.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot d -cdrom /dev/cdrom -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot d -cdrom /dev/cdrom -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-boot-floppy.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-boot-floppy.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-boot-floppy.args
--- tests/qemuxml2argvdata/qemuxml2argv-boot-floppy.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-boot-floppy.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot a -hda /dev/HostVG/QEMUGuest1 -fda /tmp/firmware.img -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot a -hda /dev/HostVG/QEMUGuest1 -fda /tmp/firmware.img -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-boot-network.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-boot-network.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-boot-network.args
--- tests/qemuxml2argvdata/qemuxml2argv-boot-network.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-boot-network.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot n -hda /dev/HostVG/QEMUGuest1 -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot n -hda /dev/HostVG/QEMUGuest1 -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-clock-localtime.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-clock-localtime.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-clock-localtime.args
--- tests/qemuxml2argvdata/qemuxml2argv-clock-localtime.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-clock-localtime.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -localtime -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -localtime -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-clock-utc.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-clock-utc.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-clock-utc.args
--- tests/qemuxml2argvdata/qemuxml2argv-clock-utc.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-clock-utc.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-disk-cdrom.args
--- tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -cdrom /root/boot.iso -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -cdrom /root/boot.iso -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-disk-floppy.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-disk-floppy.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-disk-floppy.args
--- tests/qemuxml2argvdata/qemuxml2argv-disk-floppy.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-disk-floppy.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -fda /dev/fd0 -fdb /tmp/firmware.img -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -fda /dev/fd0 -fdb /tmp/firmware.img -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-disk-many.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-disk-many.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-disk-many.args
--- tests/qemuxml2argvdata/qemuxml2argv-disk-many.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-disk-many.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -hdb /dev/HostVG/QEMUGuest2 -hdc /tmp/data.img -hdd /tmp/logs.img -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -hdb /dev/HostVG/QEMUGuest2 -hdc /tmp/data.img -hdd /tmp/logs.img -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-graphics-sdl.args
--- tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -sdl
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-input-usbmouse.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-input-usbmouse.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-input-usbmouse.args
--- tests/qemuxml2argvdata/qemuxml2argv-input-usbmouse.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-input-usbmouse.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -usbdevice mouse -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -usbdevice mouse
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-input-usbtablet.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-input-usbtablet.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-input-usbtablet.args
--- tests/qemuxml2argvdata/qemuxml2argv-input-usbtablet.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-input-usbtablet.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -usbdevice tablet -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -usbdevice tablet
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-minimal.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-minimal.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-minimal.args
--- tests/qemuxml2argvdata/qemuxml2argv-minimal.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-minimal.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-misc-acpi.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-misc-acpi.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-misc-acpi.args
--- tests/qemuxml2argvdata/qemuxml2argv-misc-acpi.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-misc-acpi.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-misc-no-reboot.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-misc-no-reboot.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-misc-no-reboot.args
--- tests/qemuxml2argvdata/qemuxml2argv-misc-no-reboot.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-misc-no-reboot.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-reboot -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-reboot -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -usb
\ No newline at end of file
Index: tests/qemuxml2argvdata/qemuxml2argv-net-user.args
===================================================================
RCS file: /data/cvs/libvirt/tests/qemuxml2argvdata/qemuxml2argv-net-user.args,v
retrieving revision 1.1
diff -u -p -r1.1 qemuxml2argv-net-user.args
--- tests/qemuxml2argvdata/qemuxml2argv-net-user.args 18 Jul 2007 21:34:22 -0000 1.1
+++ tests/qemuxml2argvdata/qemuxml2argv-net-user.args 23 Jul 2007 19:48:07 -0000
@@ -1 +1 @@
-/usr/bin/qemu -M pc -m 214 -smp 1 -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net nic,macaddr=00:11:22:33:44:55,vlan=0 -net user,vlan=0 -usb -nographic
\ No newline at end of file
+/usr/bin/qemu -M pc -m 214 -smp 1 -nographic -monitor pty -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net nic,macaddr=00:11:22:33:44:55,vlan=0 -net user,vlan=0 -usb
\ No newline at end of file
More information about the libvir-list
mailing list