[libvirt] Re: [augeas-devel] PATCH: Add a augeas lens for libvirtd.conf
Daniel P. Berrange
berrange at redhat.com
Wed Aug 27 11:31:59 UTC 2008
On Tue, Aug 26, 2008 at 09:40:41PM +0000, David Lutterkort wrote:
> On Tue, 2008-08-26 at 21:05 +0100, Daniel P. Berrange wrote:
> > diff -u -p -r1.51 Makefile.am
> > --- qemud/Makefile.am 20 Aug 2008 20:48:35 -0000 1.51
> > +++ qemud/Makefile.am 26 Aug 2008 20:03:48 -0000
> > @@ -24,6 +24,8 @@ EXTRA_DIST = \
> > libvirtd.policy \
> > libvirtd.sasl \
> > libvirtd.sysconf \
> > + libvirtd.aug \
> > + test_libvirtd.aug \
> > $(AVAHI_SOURCES) \
> > $(DAEMON_SOURCES)
> >
> > @@ -56,6 +58,12 @@ sbin_PROGRAMS = libvirtd
> > confdir = $(sysconfdir)/libvirt/
> > conf_DATA = libvirtd.conf
> >
> > +augeasdir = $(datadir)/augeas/lenses
> > +augeas_DATA = libvirtd.aug
> > +
> > +augeastestsdir = $(datadir)/augeas/lenses/tests
> > +augeastests_DATA = test_libvirtd.aug
> > +
> > libvirtd_SOURCES = $(DAEMON_SOURCES)
>
> You might also add a test that runs
> augparse -I . test_libvirtd.aug
> during 'make check'
Yep, I've added a check-local rule for that in this new patch.
> > + let array_sep = del /,[ \t\n]*/ ", "
> > + let array_start = del /\[[ \t\n]*/ "[ "
> > + let array_end = del /\]/ " ]"
>
> Augeas should throw an error here, but doesn't ;) The default value you
> give as the second argument of del really should match the first
> (regexp) argument.
Ahh, nice catch.
> > + let str_val = del /\"/ "\"" . store /[^\"]*/ . del /\"/ "\""
> > + let bool_val = store /0|1/
> > + let str_array_element = [ str_val ] . del /[ \t\n]*/ ""
> > + let str_array_val = array_start . ( str_array_element . ( array_sep . str_array_element ) * ) ? . array_end
>
> You should really have some sort of label on each array element/str val
> (either the same for all of them using 'label' or just consecutive
> numbers using 'seq') - without that, you won't be able to get to
> individual entries through the public API.
I've changed that to which looks to give gives each element a unique ID
let str_array_element = [ seq "el" . str_val ] . del /[ \t\n]*/ ""
let str_array_val = counter "el" . array_start . ( str_array_element . ( array_sep . str_array_element ) * ) ? . array_end
> > + let comment = [ label "comment" . del /#[ \t]*/ "# " . store /([^ \t\n][^\n]*)?/ . del /\n/ "\n" ]
>
> We've been trying to label all comments as '#comment'; it's not an issue
> for libvirt, but with some other file formats, using 'comment' leads to
> conflicts with actual entries. Would be good to stick to that
> convention.
Ok, I was just copying one of the existing lens on my system. I've changed
it to #comment now
> > + let empty = [ label "empty" . del /[ \t]*\n/ "" ]
>
> Do you really care that empty entries show up in the tree ? If you don't
> want to see them, you can remove the 'label' from the above, and
> possibly also the '[ .. ]'.
Ok, this gets fun. I don't particularly want the label or tree node.
I can remove the label OK, but that gives anonymous tree nods. If
I remove the [...], then I end up with
test -x /usr/bin/augparse && /usr/bin/augparse -I . test_libvirtd.aug
./libvirtd.aug:63.3-.43:Failed to compile lns
./libvirtd.aug:63.13-.43:exception: ambiguous tree iteration
'ca_file/' can be split into
'|=|ca_file/'
and
'ca_file/|=|'
Iterated lens: ./libvirtd.aug:63.15-.39
test_libvirtd.aug:253.8-.20:Could not load module Libvirtd for Libvirtd.lns
test_libvirtd.aug:253.8-.20:Undefined variable Libvirtd.lns
test_libvirtd.aug: error: Loading failed
And I'm utterly stuck on what this means / how to fix it. I didn't
expect removing the square brackets to change the DFA.
> > diff -N qemud/test_libvirtd.aug
> > --- /dev/null 1 Jan 1970 00:00:00 -0000
> > +++ qemud/test_libvirtd.aug 26 Aug 2008 20:03:48 -0000
> > @@ -0,0 +1,484 @@
> > +module Test_libvirtd =
> > + let conf1 = "# Master libvirt daemon configuration file
>
> I've been thinking that we need to have some function that reads a file
> and returns a string so we don't have to clutter tests with these long
> strings. But for now, that's what it is :(
Yes, that would be very nice - and/or supporting use of <<HERE documents
for strings, so I don't have to escape " throughout the embedded config
file
>
> > + { "tls_allowed_dn_list"
> > + { = "DN1"}
> > + { = "DN2"}
> > + }
>
> This happens because str_array_element produces tree nodes without
> labels. Users won't have a way to change e.g. the 'DN1' value to 'myDN'
> since you can't address a node without a label through the public API.
This now has integer keys.
One other useful improvement would be for the test suite to only print
out sections of the tree which differ. In debugging this it printed
out a 400 line 'Expected' tree structure, and then a 400 line 'Actual'
tree structure and wanted me to play "Where's Waldo" to find the typo.
It would be good to trim the leading and trailing nodes which are the
same
> All in all, very nice, and I am really glad that upstream is shipping a
> lens :)
Just discovered one minor issue. The Fedora RPM guidelines require that
an RPM either own a directory, or require an RPM that owns it, and two
RPMs aren't allowed to own the same directory. I don't want/need to
depend on Augeas directly, but equally I need someone to own the
/usr/share/augeas/lens directory. Wonder if that directory should be put
into the 'filesystem' RPM ?
Daniel
diff -r 387c16703a90 configure.in
--- a/configure.in Wed Aug 27 11:32:54 2008 +0100
+++ b/configure.in Wed Aug 27 11:35:41 2008 +0100
@@ -100,7 +100,7 @@
AC_PATH_PROG([XMLLINT], [xmllint], [/usr/bin/xmllint])
AC_PATH_PROG([XMLCATALOG], [xmlcatalog], [/usr/bin/xmlcatalog])
AC_PATH_PROG([XSLTPROC], [xsltproc], [/usr/bin/xsltproc])
-
+AC_PATH_PROG([AUGPARSE], [augparse], [/usr/bin/augparse])
AC_PROG_MKDIR_P
dnl External programs that we can use if they are available.
diff -r 387c16703a90 libvirt.spec.in
--- a/libvirt.spec.in Wed Aug 27 11:32:54 2008 +0100
+++ b/libvirt.spec.in Wed Aug 27 11:35:41 2008 +0100
@@ -252,6 +252,8 @@
%dir %{_localstatedir}/lib/libvirt/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/images/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/boot/
+%{_datadir}/augeas/lenses/libvirtd.aug
+%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
%if %{with_polkit}
%{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
%endif
diff -r 387c16703a90 qemud/Makefile.am
--- a/qemud/Makefile.am Wed Aug 27 11:32:54 2008 +0100
+++ b/qemud/Makefile.am Wed Aug 27 11:35:41 2008 +0100
@@ -24,6 +24,8 @@
libvirtd.policy \
libvirtd.sasl \
libvirtd.sysconf \
+ libvirtd.aug \
+ test_libvirtd.aug \
$(AVAHI_SOURCES) \
$(DAEMON_SOURCES)
@@ -55,6 +57,12 @@
confdir = $(sysconfdir)/libvirt/
conf_DATA = libvirtd.conf
+
+augeasdir = $(datadir)/augeas/lenses
+augeas_DATA = libvirtd.aug
+
+augeastestsdir = $(datadir)/augeas/lenses/tests
+augeastests_DATA = test_libvirtd.aug
libvirtd_SOURCES = $(DAEMON_SOURCES)
@@ -172,6 +180,9 @@
chmod a+x $@-t
mv $@-t $@
+check-local:
+ test -x $(AUGPARSE) && $(AUGPARSE) -I $(srcdir) test_libvirtd.aug
+
else
install-init:
diff -r 387c16703a90 qemud/libvirtd.aug
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/qemud/libvirtd.aug Wed Aug 27 11:35:41 2008 +0100
@@ -0,0 +1,69 @@
+(* /etc/libvirt/libvirtd.conf *)
+
+module Libvirtd =
+ autoload xfm
+
+ let eol = del /[ \t]*\n/ "\n"
+ let value_sep = del /[ \t]*=[ \t]*/ " = "
+ let indent = del /[ \t]*/ ""
+
+ let array_sep = del /,[ \t\n]*/ ", "
+ let array_start = del /\[[ \t\n]*/ "[ "
+ let array_end = del /\]/ "]"
+
+ let str_val = del /\"/ "\"" . store /[^\"]*/ . del /\"/ "\""
+ let bool_val = store /0|1/
+ let str_array_element = [ seq "el" . str_val ] . del /[ \t\n]*/ ""
+ let str_array_val = counter "el" . array_start . ( str_array_element . ( array_sep . str_array_element ) * ) ? . array_end
+
+ let str_entry (kw:string) = [ key kw . value_sep . str_val ]
+ let bool_entry (kw:string) = [ key kw . value_sep . bool_val ]
+ let str_array_entry (kw:string) = [ key kw . value_sep . str_array_val ]
+
+
+ (* Config entry grouped by function - same order as example config *)
+ let network_entry = bool_entry "listen_tls"
+ | bool_entry "listen_tcp"
+ | str_entry "tls_port"
+ | str_entry "tcp_port"
+ | str_entry "listen_addr"
+ | bool_entry "mdns_adv"
+ | str_entry "mdns_name"
+
+ let sock_acl_entry = str_entry "unix_sock_group"
+ | str_entry "unix_sock_ro_perms"
+ | str_entry "unix_sock_rw_perms"
+
+ let authentication_entry = str_entry "auth_unix_ro"
+ | str_entry "auth_unix_rw"
+ | str_entry "auth_tcp"
+ | str_entry "auth_tls"
+
+ let certificate_entry = str_entry "key_file"
+ | str_entry "cert_file"
+ | str_entry "ca_file"
+ | str_entry "crl_file"
+
+ let authorization_entry = bool_entry "tls_no_verify_certificate"
+ | str_array_entry "tls_allowed_dn_list"
+ | str_array_entry "sasl_allowed_username_list"
+
+
+ (* Each enty in the config is one of the following three ... *)
+ let entry = network_entry
+ | sock_acl_entry
+ | authentication_entry
+ | certificate_entry
+ | authorization_entry
+ let comment = [ label "#comment" . del /#[ \t]*/ "# " . store /([^ \t\n][^\n]*)?/ . del /\n/ "\n" ]
+ let empty = [ label "#empty" . eol ]
+
+ let record = indent . entry . eol
+
+ let lns = ( record | comment | empty ) *
+
+ let filter = incl "/etc/libvirt/libvirtd.conf"
+ . Util.stdexcl
+
+ let xfm = transform lns filter
+
diff -r 387c16703a90 qemud/test_libvirtd.aug
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/qemud/test_libvirtd.aug Wed Aug 27 11:35:41 2008 +0100
@@ -0,0 +1,484 @@
+module Test_libvirtd =
+ let conf1 = "# Master libvirt daemon configuration file
+#
+# For further information consult http://libvirt.org/format.html
+
+
+#################################################################
+#
+# Network connectivity controls
+#
+
+# Flag listening for secure TLS connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# It is necessary to setup a CA and issue server certificates before
+# using this capability.
+#
+# This is enabled by default, uncomment this to disable it
+listen_tls = 0
+"
+
+ let conf = "# Master libvirt daemon configuration file
+#
+# For further information consult http://libvirt.org/format.html
+
+
+#################################################################
+#
+# Network connectivity controls
+#
+
+# Flag listening for secure TLS connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# It is necessary to setup a CA and issue server certificates before
+# using this capability.
+#
+# This is enabled by default, uncomment this to disable it
+listen_tls = 0
+
+# Listen for unencrypted TCP connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# Using the TCP socket requires SASL authentication by default. Only
+# SASL mechanisms which support data encryption are allowed. This is
+# DIGEST_MD5 and GSSAPI (Kerberos5)
+#
+# This is disabled by default, uncomment this to enable it.
+listen_tcp = 1
+
+
+
+# Override the port for accepting secure TLS connections
+# This can be a port number, or service name
+#
+tls_port = \"16514\"
+
+# Override the port for accepting insecure TCP connections
+# This can be a port number, or service name
+#
+tcp_port = \"16509\"
+
+
+# Override the default configuration which binds to all network
+# interfaces. This can be a numeric IPv4/6 address, or hostname
+#
+listen_addr = \"192.168.0.1\"
+
+
+# Flag toggling mDNS advertizement of the libvirt service.
+#
+# Alternatively can disable for all services on a host by
+# stopping the Avahi daemon
+#
+# This is enabled by default, uncomment this to disable it
+mdns_adv = 0
+
+# Override the default mDNS advertizement name. This must be
+# unique on the immediate broadcast network.
+#
+# The default is \"Virtualization Host HOSTNAME\", where HOSTNAME
+# is subsituted for the short hostname of the machine (without domain)
+#
+mdns_name = \"Virtualization Host Joe Demo\"
+
+
+#################################################################
+#
+# UNIX socket access controls
+#
+
+# Set the UNIX domain socket group ownership. This can be used to
+# allow a 'trusted' set of users access to management capabilities
+# without becoming root.
+#
+# This is restricted to 'root' by default.
+unix_sock_group = \"libvirt\"
+
+# Set the UNIX socket permissions for the R/O socket. This is used
+# for monitoring VM status only
+#
+# Default allows any user. If setting group ownership may want to
+# restrict this to:
+unix_sock_ro_perms = \"0777\"
+
+# Set the UNIX socket permissions for the R/W socket. This is used
+# for full management of VMs
+#
+# Default allows only root. If PolicyKit is enabled on the socket,
+# the default will change to allow everyone (eg, 0777)
+#
+# If not using PolicyKit and setting group ownership for access
+# control then you may want to relax this to:
+unix_sock_rw_perms = \"0770\"
+
+
+
+#################################################################
+#
+# Authentication.
+#
+# - none: do not perform auth checks. If you can connect to the
+# socket you are allowed. This is suitable if there are
+# restrictions on connecting to the socket (eg, UNIX
+# socket permissions), or if there is a lower layer in
+# the network providing auth (eg, TLS/x509 certificates)
+#
+# - sasl: use SASL infrastructure. The actual auth scheme is then
+# controlled from /etc/sasl2/libvirt.conf. For the TCP
+# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+# For non-TCP or TLS sockets, any scheme is allowed.
+#
+# - polkit: use PolicyKit to authenticate. This is only suitable
+# for use on the UNIX sockets. The default policy will
+# require a user to supply their own password to gain
+# full read/write access (aka sudo like), while anyone
+# is allowed read/only access.
+#
+# Set an authentication scheme for UNIX read-only sockets
+# By default socket permissions allow anyone to connect
+#
+# To restrict monitoring of domains you may wish to enable
+# an authentication mechanism here
+auth_unix_ro = \"none\"
+
+# Set an authentication scheme for UNIX read-write sockets
+# By default socket permissions only allow root. If PolicyKit
+# support was compiled into libvirt, the default will be to
+# use 'polkit' auth.
+#
+# If the unix_sock_rw_perms are changed you may wish to enable
+# an authentication mechanism here
+auth_unix_rw = \"none\"
+
+# Change the authentication scheme for TCP sockets.
+#
+# If you don't enable SASL, then all TCP traffic is cleartext.
+# Don't do this outside of a dev/test scenario. For real world
+# use, always enable SASL and use the GSSAPI or DIGEST-MD5
+# mechanism in /etc/sasl2/libvirt.conf
+auth_tcp = \"sasl\"
+
+# Change the authentication scheme for TLS sockets.
+#
+# TLS sockets already have encryption provided by the TLS
+# layer, and limited authentication is done by certificates
+#
+# It is possible to make use of any SASL authentication
+# mechanism as well, by using 'sasl' for this option
+auth_tls = \"none\"
+
+
+
+#################################################################
+#
+# TLS x509 certificate configuration
+#
+
+
+# Override the default server key file path
+#
+key_file = \"/etc/pki/libvirt/private/serverkey.pem\"
+
+# Override the default server certificate file path
+#
+cert_file = \"/etc/pki/libvirt/servercert.pem\"
+
+# Override the default CA certificate path
+#
+ca_file = \"/etc/pki/CA/cacert.pem\"
+
+# Specify a certificate revocation list.
+#
+# Defaults to not using a CRL, uncomment to enable it
+crl_file = \"/etc/pki/CA/crl.pem\"
+
+
+
+#################################################################
+#
+# Authorization controls
+#
+
+
+# Flag to disable verification of client certificates
+#
+# Client certificate verification is the primary authentication mechanism.
+# Any client which does not present a certificate signed by the CA
+# will be rejected.
+#
+# Default is to always verify. Uncommenting this will disable
+# verification - make sure an IP whitelist is set
+tls_no_verify_certificate = 1
+
+
+# A whitelist of allowed x509 Distinguished Names
+# This list may contain wildcards such as
+#
+# \"C=GB,ST=London,L=London,O=Red Hat,CN=*\"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no DN's are checked
+ tls_allowed_dn_list = [\"DN1\", \"DN2\"]
+
+
+# A whitelist of allowed SASL usernames. The format for usernames
+# depends on the SASL authentication mechanism. Kerberos usernames
+# look like username at REALM
+#
+# This list may contain wildcards such as
+#
+# \"*@EXAMPLE.COM\"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no Username's are checked
+sasl_allowed_username_list = [
+ \"joe at EXAMPLE.COM\",
+ \"fred at EXAMPLE.COM\"
+]
+"
+
+ test Libvirtd.lns get conf =
+ { "#comment" = "Master libvirt daemon configuration file" }
+ { "#comment" = "" }
+ { "#comment" = "For further information consult http://libvirt.org/format.html" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "################################################################" }
+ { "#comment" = "" }
+ { "#comment" = "Network connectivity controls" }
+ { "#comment" = "" }
+ { "#empty" }
+ { "#comment" = "Flag listening for secure TLS connections on the public TCP/IP port." }
+ { "#comment" = "NB, must pass the --listen flag to the libvirtd process for this to" }
+ { "#comment" = "have any effect." }
+ { "#comment" = "" }
+ { "#comment" = "It is necessary to setup a CA and issue server certificates before" }
+ { "#comment" = "using this capability." }
+ { "#comment" = "" }
+ { "#comment" = "This is enabled by default, uncomment this to disable it" }
+ { "listen_tls" = "0" }
+ { "#empty" }
+ { "#comment" = "Listen for unencrypted TCP connections on the public TCP/IP port." }
+ { "#comment" = "NB, must pass the --listen flag to the libvirtd process for this to" }
+ { "#comment" = "have any effect." }
+ { "#comment" = "" }
+ { "#comment" = "Using the TCP socket requires SASL authentication by default. Only" }
+ { "#comment" = "SASL mechanisms which support data encryption are allowed. This is" }
+ { "#comment" = "DIGEST_MD5 and GSSAPI (Kerberos5)" }
+ { "#comment" = "" }
+ { "#comment" = "This is disabled by default, uncomment this to enable it." }
+ { "listen_tcp" = "1" }
+ { "#empty" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "Override the port for accepting secure TLS connections" }
+ { "#comment" = "This can be a port number, or service name" }
+ { "#comment" = "" }
+ { "tls_port" = "16514" }
+ { "#empty" }
+ { "#comment" = "Override the port for accepting insecure TCP connections" }
+ { "#comment" = "This can be a port number, or service name" }
+ { "#comment" = "" }
+ { "tcp_port" = "16509" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "Override the default configuration which binds to all network" }
+ { "#comment" = "interfaces. This can be a numeric IPv4/6 address, or hostname" }
+ { "#comment" = "" }
+ { "listen_addr" = "192.168.0.1" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "Flag toggling mDNS advertizement of the libvirt service." }
+ { "#comment" = "" }
+ { "#comment" = "Alternatively can disable for all services on a host by" }
+ { "#comment" = "stopping the Avahi daemon" }
+ { "#comment" = "" }
+ { "#comment" = "This is enabled by default, uncomment this to disable it" }
+ { "mdns_adv" = "0" }
+ { "#empty" }
+ { "#comment" = "Override the default mDNS advertizement name. This must be" }
+ { "#comment" = "unique on the immediate broadcast network." }
+ { "#comment" = "" }
+ { "#comment" = "The default is \"Virtualization Host HOSTNAME\", where HOSTNAME" }
+ { "#comment" = "is subsituted for the short hostname of the machine (without domain)" }
+ { "#comment" = "" }
+ { "mdns_name" = "Virtualization Host Joe Demo" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "################################################################" }
+ { "#comment" = "" }
+ { "#comment" = "UNIX socket access controls" }
+ { "#comment" = "" }
+ { "#empty" }
+ { "#comment" = "Set the UNIX domain socket group ownership. This can be used to" }
+ { "#comment" = "allow a 'trusted' set of users access to management capabilities" }
+ { "#comment" = "without becoming root." }
+ { "#comment" = "" }
+ { "#comment" = "This is restricted to 'root' by default." }
+ { "unix_sock_group" = "libvirt" }
+ { "#empty" }
+ { "#comment" = "Set the UNIX socket permissions for the R/O socket. This is used" }
+ { "#comment" = "for monitoring VM status only" }
+ { "#comment" = "" }
+ { "#comment" = "Default allows any user. If setting group ownership may want to" }
+ { "#comment" = "restrict this to:" }
+ { "unix_sock_ro_perms" = "0777" }
+ { "#empty" }
+ { "#comment" = "Set the UNIX socket permissions for the R/W socket. This is used" }
+ { "#comment" = "for full management of VMs" }
+ { "#comment" = "" }
+ { "#comment" = "Default allows only root. If PolicyKit is enabled on the socket," }
+ { "#comment" = "the default will change to allow everyone (eg, 0777)" }
+ { "#comment" = "" }
+ { "#comment" = "If not using PolicyKit and setting group ownership for access" }
+ { "#comment" = "control then you may want to relax this to:" }
+ { "unix_sock_rw_perms" = "0770" }
+ { "#empty" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "################################################################" }
+ { "#comment" = "" }
+ { "#comment" = "Authentication." }
+ { "#comment" = "" }
+ { "#comment" = "- none: do not perform auth checks. If you can connect to the" }
+ { "#comment" = "socket you are allowed. This is suitable if there are" }
+ { "#comment" = "restrictions on connecting to the socket (eg, UNIX" }
+ { "#comment" = "socket permissions), or if there is a lower layer in" }
+ { "#comment" = "the network providing auth (eg, TLS/x509 certificates)" }
+ { "#comment" = "" }
+ { "#comment" = "- sasl: use SASL infrastructure. The actual auth scheme is then" }
+ { "#comment" = "controlled from /etc/sasl2/libvirt.conf. For the TCP" }
+ { "#comment" = "socket only GSSAPI & DIGEST-MD5 mechanisms will be used." }
+ { "#comment" = "For non-TCP or TLS sockets, any scheme is allowed." }
+ { "#comment" = "" }
+ { "#comment" = "- polkit: use PolicyKit to authenticate. This is only suitable" }
+ { "#comment" = "for use on the UNIX sockets. The default policy will" }
+ { "#comment" = "require a user to supply their own password to gain" }
+ { "#comment" = "full read/write access (aka sudo like), while anyone" }
+ { "#comment" = "is allowed read/only access." }
+ { "#comment" = "" }
+ { "#comment" = "Set an authentication scheme for UNIX read-only sockets" }
+ { "#comment" = "By default socket permissions allow anyone to connect" }
+ { "#comment" = "" }
+ { "#comment" = "To restrict monitoring of domains you may wish to enable" }
+ { "#comment" = "an authentication mechanism here" }
+ { "auth_unix_ro" = "none" }
+ { "#empty" }
+ { "#comment" = "Set an authentication scheme for UNIX read-write sockets" }
+ { "#comment" = "By default socket permissions only allow root. If PolicyKit" }
+ { "#comment" = "support was compiled into libvirt, the default will be to" }
+ { "#comment" = "use 'polkit' auth." }
+ { "#comment" = "" }
+ { "#comment" = "If the unix_sock_rw_perms are changed you may wish to enable" }
+ { "#comment" = "an authentication mechanism here" }
+ { "auth_unix_rw" = "none" }
+ { "#empty" }
+ { "#comment" = "Change the authentication scheme for TCP sockets." }
+ { "#comment" = "" }
+ { "#comment" = "If you don't enable SASL, then all TCP traffic is cleartext." }
+ { "#comment" = "Don't do this outside of a dev/test scenario. For real world" }
+ { "#comment" = "use, always enable SASL and use the GSSAPI or DIGEST-MD5" }
+ { "#comment" = "mechanism in /etc/sasl2/libvirt.conf" }
+ { "auth_tcp" = "sasl" }
+ { "#empty" }
+ { "#comment" = "Change the authentication scheme for TLS sockets." }
+ { "#comment" = "" }
+ { "#comment" = "TLS sockets already have encryption provided by the TLS" }
+ { "#comment" = "layer, and limited authentication is done by certificates" }
+ { "#comment" = "" }
+ { "#comment" = "It is possible to make use of any SASL authentication" }
+ { "#comment" = "mechanism as well, by using 'sasl' for this option" }
+ { "auth_tls" = "none" }
+ { "#empty" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "################################################################" }
+ { "#comment" = "" }
+ { "#comment" = "TLS x509 certificate configuration" }
+ { "#comment" = "" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "Override the default server key file path" }
+ { "#comment" = "" }
+ { "key_file" = "/etc/pki/libvirt/private/serverkey.pem" }
+ { "#empty" }
+ { "#comment" = "Override the default server certificate file path" }
+ { "#comment" = "" }
+ { "cert_file" = "/etc/pki/libvirt/servercert.pem" }
+ { "#empty" }
+ { "#comment" = "Override the default CA certificate path" }
+ { "#comment" = "" }
+ { "ca_file" = "/etc/pki/CA/cacert.pem" }
+ { "#empty" }
+ { "#comment" = "Specify a certificate revocation list." }
+ { "#comment" = "" }
+ { "#comment" = "Defaults to not using a CRL, uncomment to enable it" }
+ { "crl_file" = "/etc/pki/CA/crl.pem" }
+ { "#empty" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "################################################################" }
+ { "#comment" = "" }
+ { "#comment" = "Authorization controls" }
+ { "#comment" = "" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "Flag to disable verification of client certificates" }
+ { "#comment" = "" }
+ { "#comment" = "Client certificate verification is the primary authentication mechanism." }
+ { "#comment" = "Any client which does not present a certificate signed by the CA" }
+ { "#comment" = "will be rejected." }
+ { "#comment" = "" }
+ { "#comment" = "Default is to always verify. Uncommenting this will disable" }
+ { "#comment" = "verification - make sure an IP whitelist is set" }
+ { "tls_no_verify_certificate" = "1" }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "A whitelist of allowed x509 Distinguished Names" }
+ { "#comment" = "This list may contain wildcards such as" }
+ { "#comment" = "" }
+ { "#comment" = "\"C=GB,ST=London,L=London,O=Red Hat,CN=*\"" }
+ { "#comment" = "" }
+ { "#comment" = "See the POSIX fnmatch function for the format of the wildcards." }
+ { "#comment" = "" }
+ { "#comment" = "NB If this is an empty list, no client can connect, so comment out" }
+ { "#comment" = "entirely rather than using empty list to disable these checks" }
+ { "#comment" = "" }
+ { "#comment" = "By default, no DN's are checked" }
+ { "tls_allowed_dn_list"
+ { "1" = "DN1"}
+ { "2" = "DN2"}
+ }
+ { "#empty" }
+ { "#empty" }
+ { "#comment" = "A whitelist of allowed SASL usernames. The format for usernames" }
+ { "#comment" = "depends on the SASL authentication mechanism. Kerberos usernames" }
+ { "#comment" = "look like username at REALM" }
+ { "#comment" = "" }
+ { "#comment" = "This list may contain wildcards such as" }
+ { "#comment" = "" }
+ { "#comment" = "\"*@EXAMPLE.COM\"" }
+ { "#comment" = "" }
+ { "#comment" = "See the POSIX fnmatch function for the format of the wildcards." }
+ { "#comment" = "" }
+ { "#comment" = "NB If this is an empty list, no client can connect, so comment out" }
+ { "#comment" = "entirely rather than using empty list to disable these checks" }
+ { "#comment" = "" }
+ { "#comment" = "By default, no Username's are checked" }
+ { "sasl_allowed_username_list"
+ { "1" = "joe at EXAMPLE.COM" }
+ { "2" = "fred at EXAMPLE.COM" }
+ }
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
More information about the libvir-list
mailing list