[libvirt] [PATCH 2/3] re-indent network.rng following structural change

Laine Stump laine at laine.org
Thu Nov 11 20:41:28 UTC 2010


This commit is whitespace changes only, do avoid obscuring actual code
changes.
---
 docs/schemas/network.rng |  206 +++++++++++++++++++++++-----------------------
 1 files changed, 103 insertions(+), 103 deletions(-)

diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng
index d898b77..ca100b7 100644
--- a/docs/schemas/network.rng
+++ b/docs/schemas/network.rng
@@ -5,126 +5,126 @@
     <ref name="network"/>
   </start>
 
-<define name="network">
+  <define name="network">
 
-<element name="network">
-  <interleave>
+    <element name="network">
+      <interleave>
 
-  <!-- The name of the network, used to refer to it through the API
-       and in virsh -->
-  <element name="name">
-    <text/>
-  </element>
-
-  <!-- <uuid> element -->
-  <optional>
-    <element name="uuid"><text/></element>
-  </optional>
-
-  <!-- <bridge> element -->
-  <optional>
-    <!-- The name of the network to be set up; this will back
-         the network on the host -->
-    <element name="bridge">
-      <optional>
-        <attribute name="name">
+        <!-- The name of the network, used to refer to it through the API
+             and in virsh -->
+        <element name="name">
           <text/>
-        </attribute>
-      </optional>
+        </element>
 
-      <optional>
-        <attribute name="stp">
-          <choice>
-            <value>on</value>
-            <value>off</value>
-          </choice>
-        </attribute>
-      </optional>
+        <!-- <uuid> element -->
+        <optional>
+          <element name="uuid"><text/></element>
+        </optional>
 
-      <optional>
-        <attribute name="delay">
-          <data type="integer"/>
-        </attribute>
-      </optional>
+        <!-- <bridge> element -->
+        <optional>
+          <!-- The name of the network to be set up; this will back
+               the network on the host -->
+          <element name="bridge">
+            <optional>
+              <attribute name="name">
+                <text/>
+              </attribute>
+            </optional>
 
-    </element>
-  </optional>
+            <optional>
+              <attribute name="stp">
+                <choice>
+                  <value>on</value>
+                  <value>off</value>
+                </choice>
+              </attribute>
+            </optional>
 
-  <!-- <forward> element -->
-  <optional>
-    <!-- The device through which the bridge is connected to the
-         rest of the network -->
-    <element name="forward">
-      <optional>
-        <attribute name="dev">
-          <text/>
-        </attribute>
-      </optional>
+            <optional>
+              <attribute name="delay">
+                <data type="integer"/>
+              </attribute>
+            </optional>
 
-      <optional>
-        <attribute name="mode">
-          <choice>
-            <value>nat</value>
-            <value>route</value>
-          </choice>
-        </attribute>
-      </optional>
-    </element>
-  </optional>
+          </element>
+        </optional>
 
-  <!-- <domain> element -->
-  <optional>
-    <element name="domain">
-      <attribute name="name"><text/></attribute>
-    </element>
-  </optional>
+        <!-- <forward> element -->
+        <optional>
+          <!-- The device through which the bridge is connected to the
+               rest of the network -->
+          <element name="forward">
+            <optional>
+              <attribute name="dev">
+                <text/>
+              </attribute>
+            </optional>
 
-  <!-- <ip> element -->
-  <optional>
-    <!-- The IP element sets up NAT'ing and an optional DHCP server
-         local to the host. -->
-    <!-- FIXME: address, netmask and the start and end of the ranges
-         are IP addresses, and should be validated as such in the scheme -->
-    <element name="ip">
-      <optional>
-        <attribute name="address"><text/></attribute>
-      </optional>
-      <optional>
-        <attribute name="netmask"><text/></attribute>
-      </optional>
-      <optional>
-        <element name="tftp">
-          <attribute name="root"><text/></attribute>
-        </element>
-      </optional>
-      <!-- Define the range(s) of IP addresses that the DHCP
-           server should hand out -->
-      <element name="dhcp">
-        <zeroOrMore>
-          <element name="range">
-            <attribute name="start"><text/></attribute>
-            <attribute name="end"><text/></attribute>
+            <optional>
+              <attribute name="mode">
+                <choice>
+                  <value>nat</value>
+                  <value>route</value>
+                </choice>
+              </attribute>
+            </optional>
           </element>
-        </zeroOrMore>
-        <zeroOrMore>
-          <element name="host">
-            <attribute name="mac"><text/></attribute>
+        </optional>
+
+        <!-- <domain> element -->
+        <optional>
+          <element name="domain">
             <attribute name="name"><text/></attribute>
-            <attribute name="ip"><text/></attribute>
           </element>
-        </zeroOrMore>
+        </optional>
+
+        <!-- <ip> element -->
         <optional>
-          <element name="bootp">
-            <attribute name="file"><text/></attribute>
+          <!-- The IP element sets up NAT'ing and an optional DHCP server
+               local to the host. -->
+          <!-- FIXME: address, netmask and the start and end of the ranges
+               are IP addresses, and should be validated as such in the scheme -->
+          <element name="ip">
+            <optional>
+              <attribute name="address"><text/></attribute>
+            </optional>
+            <optional>
+              <attribute name="netmask"><text/></attribute>
+            </optional>
             <optional>
-              <attribute name="server"><text/></attribute>
+              <element name="tftp">
+                <attribute name="root"><text/></attribute>
+              </element>
             </optional>
+            <!-- Define the range(s) of IP addresses that the DHCP
+                 server should hand out -->
+            <element name="dhcp">
+              <zeroOrMore>
+                <element name="range">
+                  <attribute name="start"><text/></attribute>
+                  <attribute name="end"><text/></attribute>
+                </element>
+              </zeroOrMore>
+              <zeroOrMore>
+                <element name="host">
+                  <attribute name="mac"><text/></attribute>
+                  <attribute name="name"><text/></attribute>
+                  <attribute name="ip"><text/></attribute>
+                </element>
+              </zeroOrMore>
+              <optional>
+                <element name="bootp">
+                  <attribute name="file"><text/></attribute>
+                  <optional>
+                    <attribute name="server"><text/></attribute>
+                  </optional>
+                </element>
+              </optional>
+            </element>
           </element>
         </optional>
-      </element>
+      </interleave>
     </element>
-  </optional>
-  </interleave>
-</element>
-</define>
+  </define>
 </grammar>
-- 
1.7.2.3




More information about the libvir-list mailing list