[libvirt] [PATCH 4/5 v3] numatune: Support numa tuning in qemu driver.
Daniel P. Berrange
berrange at redhat.com
Tue Jun 21 10:51:44 UTC 2011
On Fri, Jun 17, 2011 at 06:22:57PM +0800, Osier Yang wrote:
> Implemented as setting NUMA policy between fork and exec as a hook,
> using libnuma. Only support memory tuning on domain process currently.
>
> For the nodemask out of range, will report soft warning instead of
> hard error in libvirt layer. (Kernel will be silent as long as one
> of set bit in the nodemask is valid on the host. E.g. For a host
> has two NUMA nodes, kernel will be silent for nodemask "01010101").
> So, soft warning is the only thing libvirt can do, as one might want
> to specify the numa policy prior to a node that doesn't exist yet,
> however, it may come as hotplug soon.
> ---
> src/qemu/qemu_process.c | 168 ++++++++++++++++++++++++++++++++++++++++++++++-
> 1 files changed, 167 insertions(+), 1 deletions(-)
>
> diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
> index fe66100..8e09e52 100644
> --- a/src/qemu/qemu_process.c
> +++ b/src/qemu/qemu_process.c
> @@ -39,6 +39,10 @@
> #include "qemu_hotplug.h"
> #include "qemu_bridge_filter.h"
>
> +#if HAVE_NUMACTL
> +# include <numa.h>
> +#endif
> +
> #include "datatypes.h"
> #include "logging.h"
> #include "virterror_internal.h"
> @@ -1175,6 +1179,166 @@ qemuProcessDetectVcpuPIDs(struct qemud_driver *driver,
> return 0;
> }
>
> +
> +/*
> + * Set NUMA memory policy for qemu process, to be run between
> + * fork/exec of QEMU only.
> + */
> +#if HAVE_NUMACTL
> +static int
> +qemuProcessInitNumaMemoryPolicy(virDomainObjPtr vm)
> +{
> + struct bitmask *mask = NULL;
> + virErrorPtr orig_err = NULL;
> + virErrorPtr err = NULL;
> + int mode = -1;
> + int node = -1;
> + int ret = -1;
> + int i = 0;
> + int maxnode = 0;
> +
> + VIR_DEBUG("Setting NUMA memory policy");
> +
> + if (numa_available() < 0) {
> + qemuReportError(VIR_ERR_INTERNAL_ERROR,
> + "%s", _("Host kernel is not aware of NUMA."));
> + return -1;
> + }
> +
> + if (!vm->def->numatune.memory.nodemask)
> + return 0;
> +
> + if (VIR_ALLOC(mask) < 0) {
> + virReportOOMError();
> + return -1;
> + }
> +
> + mask->size = VIR_DOMAIN_CPUMASK_LEN / sizeof (unsigned long);
> + if (VIR_ALLOC_N(mask->maskp, mask->size) < 0) {
> + virReportOOMError();
> + goto cleanup;
> + }
> + /* Convert nodemask to NUMA bitmask. */
> + for (i = 0; i < VIR_DOMAIN_CPUMASK_LEN; i++) {
> + int cur = 0;
> + int mod = 0;
> +
> + if (i) {
> + cur = i / (8 * sizeof (unsigned long));
> + mod = i % (8 * sizeof (unsigned long));
> + }
> +
> + if (vm->def->numatune.memory.nodemask[i]) {
> + mask->maskp[cur] |= 1 << mod;
> + }
> + }
> +
> + maxnode = numa_max_node() + 1;
> +
> + for (i = 0; i < mask->size; i++) {
> + if (i < (maxnode % (8 * sizeof (unsigned long)))) {
> + if (mask->maskp[i] & ~maxnode) {
> + VIR_WARN("nodeset is out of range, there is only %d NUMA "
> + "nodes on host", maxnode);
This should be a fatal error.
> + break;
> + }
> +
> + continue;
> + }
> +
> + if (mask->maskp[i]) {
> + VIR_WARN("nodeset is out of range, there is only %d NUMA nodes "
> + "on host", maxnode);
This should be a fatal error
> + }
> + }
> +
> + orig_err = virSaveLastError();
> + mode = vm->def->numatune.memory.mode;
> +
> + if (mode == VIR_DOMAIN_NUMATUNE_MEM_STRICT) {
> + numa_set_bind_policy(1);
> + numa_set_membind(mask);
> + numa_set_bind_policy(0);
> +
> + err = virGetLastError();
> + if ((err && (err->code != orig_err->code)) ||
> + (err && !orig_err)) {
> + qemuReportError(VIR_ERR_INTERNAL_ERROR,
> + _("Failed to bind memory to specified nodeset: %s"),
> + err ? err->message : _("unknown error"));
> + virResetLastError();
What ?????
There is no code here between the virSaveLastError call
and virGetLastError that will ever set an error. This then
calls qemuReportError(), and immediately clears it again by
calling virResetLastError. The numa_XXXX API calls can't
fail, so I don't see what this error reporting code is trying
todo. AFAICT this all needs to be deleted.
> + goto cleanup;
> + }
> + } else if (mode == VIR_DOMAIN_NUMATUNE_MEM_PREFERRED) {
> + int nnodes = 0;
> + for (i = 0; i < mask->size; i++) {
> + if (numa_bitmask_isbitset(mask, i)) {
> + node = i;
> + nnodes++;
> + }
> + }
> +
> + if (nnodes != 1) {
> + qemuReportError(VIR_ERR_INTERNAL_ERROR,
> + "%s", _("NUMA memory tuning in 'preferred' mode "
> + "only supports single node"));
> + goto cleanup;
> + }
> +
> + numa_set_bind_policy(0);
> + numa_set_preferred(node);
> +
> + err = virGetLastError();
> + if ((err && (err->code != orig_err->code)) ||
> + (err && !orig_err)) {
> + qemuReportError(VIR_ERR_INTERNAL_ERROR,
> + _("Failed to set memory policy as preferred to specified "
> + "node: %s"), err ? err->message : _("unknown error"));
> + virResetLastError();
> + goto cleanup;
> + }
Again, this code seems just bogus
> + } else if (mode == VIR_DOMAIN_NUMATUNE_MEM_INTERLEAVE) {
> + numa_set_interleave_mask(mask);
> +
> + err = virGetLastError();
> + if ((err && (err->code != orig_err->code)) ||
> + (err && !orig_err)) {
> + qemuReportError(VIR_ERR_INTERNAL_ERROR,
> + _("Failed to interleave memory to specified nodeset: %s"),
> + err ? err->message : _("unknown error"));
> + virResetLastError();
> + goto cleanup;
> + }
And this code
> + } else {
> + /* XXX: Shouldn't go here, as we already do checking when
> + * parsing domain XML.
> + */
> + qemuReportError(VIR_ERR_XML_ERROR,
> + "%s", _("Invalid mode for memory NUMA tuning."));
> + goto cleanup;
> + }
> +
> + ret = 0;
> +
> +cleanup:
> + numa_bitmask_free(mask);
> + return ret;
> +}
> +#else
> +static int
> +qemuProcessInitNumaMemoryPolicy(virDomainObjPtr vm)
> +{
> + if (vm->def->numatune.memory.nodemask) {
> + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> + _("libvirt is compiled without NUMA tuning support"));
> +
> + return -1;
> + }
> +
> + return 0;
> +}
> +#endif
Since this appears to have already been commited, please send a followup
patch to fix these problems.
Regards,
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
More information about the libvir-list
mailing list