[libvirt] libvirt-0.9.3 week freeze, RC1 version to test
simon jin
simonjin at linux.vnet.ibm.com
Tue Jun 28 08:45:11 UTC 2011
于 2011-6-28 16:20, Matthias Bolte 写道:
> 2011/6/28 simon jin<simonjin at linux.vnet.ibm.com>:
>> 于 2011-6-27 23:17, Laine Stump 写道:
>>
>> On 06/27/2011 07:32 AM, Matthias Bolte wrote:
>>
>> 2011/6/27 simon<simonjin at linux.vnet.ibm.com>:
>>
>> 于 2011-6-27 13:01, Daniel Veillard 写道:
>>
>> So we are entering the week freeze for the new version 0.9.3
>> I have made an rc1 tarball available at:
>> ftp://libvirt.org/libvirt/libvirt-0.9.3-rc1.tar.gz
>> along with rpms for those interested
>> We pushed a lot of patches in the last few days, we know there is at
>> least some cleanup issues, but I tried it locally and basic operations
>> seems to work fine,
>>
>> please give it a try too and report issues,
>>
>> thanks !
>>
>> Daniel
>>
>> On fc14.x86_64
>> TEST: networkxml2argvtest FAIL
>>
>> Download libvirt-0.9.3-rc1.tar.gz
>>
>> ./configure&& make&& make check
>>
>> It report 1 of 52 tests failed
>>
>> TEST: networkxml2argvtest
>> !.!!!!! 7 FAIL
>> FAIL: networkxml2argvtest
>>
>> This a known problem when you configure libvirt with localstatedir
>> other than /var, what happens when you just run configure without
>> arguments.
>>
>> It looks like that's what he did, so maybe this is a different problem (or
>> possibly his configure defaults to /usr/local/var?).
>>
>> If the default localstatedir isn't /var, try doing "./autogen.sh --system"
>> instead of ./configure. If that doesn't cure the problem, try running the
>> test with debug logging turned on to see exactly what error is reported:
>>
>> LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2 ./networkxml2argvtest
>>
>> I didn't use any arguments in configure, but the defaults localstatdir is
>> /usr/local/var.
>> I found below lines in config.status:
>> S["prefix"]="/usr/local"
>> S["localstatedir"]="${prefix}/var"
>>
>> ./autogen.sh --system will fix this issue.
>>
>> [libvirt-0.9.3]$ LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2
>> tests/networkxml2argvtest
>> TEST: tests/networkxml2argvtest
>> 1) Network XML-2-Argv isolated-network ...
>> /home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/isolated-network.xml:
>> failed to open: No such file or directory
>> FAILED
>> 2) Network XML-2-Argv routed-network ...
>> /home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/routed-network.xml:
>> failed to open: No such file or directory
>> FAILED
>> 3) Network XML-2-Argv nat-network ...
>> /home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/nat-network.xml:
>> failed to open: No such file or directory
>> FAILED
>> 4) Network XML-2-Argv netboot-network ...
>> /home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/netboot-network.xml:
>> failed to open: No such file or directory
>> FAILED
>> 5) Network XML-2-Argv netboot-proxy-network ...
>> /home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/netboot-proxy-network.xml:
>> failed to open: No such file or directory
>> FAILED
>> 6) Network XML-2-Argv nat-network-dns-txt-record ...
>> /home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/nat-network-dns-txt-record.xml:
>> failed to open: No such file or directory
>> FAILED
>> 7) Network XML-2-Argv nat-network-dns-hosts ...
>> /home/simon/Downloads/libvirt-0.9.3/networkxml2argvdata/nat-network-dns-hosts.xml:
>> failed to open: No such file or directory
>> FAILED
>>
>> Those .xml files actully under test/.
>>
>> -Simon Jin
> That's expected because you need to be in the tests directory to run a
> test manually or set the srcdir envvar to point to the test directory
>
> You ran
>
> LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2 tests/networkxml2argvtest
>
> but Laine suggested
>
> LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2 ./networkxml2argvtest
>
> and missed to explicitly state that you need to cd to the tests directory first.
>
cd test and run:
[tests]$ sudo LIBVIRT_LOG_OUTPUTS=3:stderr VIR_TEST_DEBUG=2
./networkxml2argvtest
[sudo] password for simon:
TEST: networkxml2argvtest
1) Network XML-2-Argv isolated-network ...
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file=
--except-interface lo --dhcp-option=3 --listen-address 192.168.152.1
--dhcp-range 192.168.152.2,192.168.152.254
*--dhcp-leasefile=/var/lib/libvirt/dnsmasq/private.leases*--dhcp-lease-max=253
--dhcp-no-override]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file=
--except-interface lo --dhcp-option=3 --listen-address 192.168.152.1
--dhcp-range 192.168.152.2,192.168.152.254
*--dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/private.leases
*--dhcp-lease-max=253 --dhcp-no-override]
... FAILED
Yes, the root cause is --localstatdir isn't set to /var. i see you have
fixed it in trunk. Thanks
-Simon Jin
2) Network XML-2-Argv routed-network
... OK
3) Network XML-2-Argv nat-network
... 16:31:38.713: 5636: info : libvirt version: 0.9.3
16:31:38.713: 5636: error : hostsfileSave:446 : cannot write config file
'/usr/local/var/lib/libvirt/dnsmasq/default.hostsfile': Unknown error
18446744073709551614
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file=
--except-interface lo --listen-address 192.168.122.1 --listen-address
192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address
2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range
192.168.122.2,192.168.122.254
--dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases
--dhcp-lease-max=253 --dhcp-no-override]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file=
--except-interface lo --listen-address 192.168.122.1 --listen-address
192.168.123.1 --listen-address 2001:db8:ac10:fe01::1 --listen-address
2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range
192.168.122.2,192.168.122.254
--dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/default.leases
--dhcp-lease-max=253 --dhcp-no-override]
... libvir: Network Config error : cannot write config file
'/usr/local/var/lib/libvirt/dnsmasq/default.hostsfile': Unknown error
18446744073709551614
FAILED
4) Network XML-2-Argv netboot-network ...
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --domain
example.com --conf-file= --except-interface lo --listen-address
192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254
--dhcp-leasefile=/var/lib/libvirt/dnsmasq/netboot.leases
--dhcp-lease-max=253 --dhcp-no-override --enable-tftp --tftp-root
/var/lib/tftproot --dhcp-boot pxeboot.img]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --domain
example.com --conf-file= --except-interface lo --listen-address
192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254
--dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/netboot.leases
--dhcp-lease-max=253 --dhcp-no-override --enable-tftp --tftp-root
/var/lib/tftproot --dhcp-boot pxeboot.img]
... FAILED
5) Network XML-2-Argv netboot-proxy-network ...
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --domain
example.com --conf-file= --except-interface lo --listen-address
192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254
--dhcp-leasefile=/var/lib/libvirt/dnsmasq/netboot.leases
--dhcp-lease-max=253 --dhcp-no-override --dhcp-boot
pxeboot.img,,10.20.30.40]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --domain
example.com --conf-file= --except-interface lo --listen-address
192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254
--dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/netboot.leases
--dhcp-lease-max=253 --dhcp-no-override --dhcp-boot
pxeboot.img,,10.20.30.40]
... FAILED
6) Network XML-2-Argv nat-network-dns-txt-record ...
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file=
--except-interface lo --txt-record=example,example value
--listen-address 192.168.122.1 --listen-address 192.168.123.1
--listen-address 2001:db8:ac10:fe01::1 --listen-address
2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range
192.168.122.2,192.168.122.254
--dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases
--dhcp-lease-max=253 --dhcp-no-override]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file=
--except-interface lo --txt-record=example,example value
--listen-address 192.168.122.1 --listen-address 192.168.123.1
--listen-address 2001:db8:ac10:fe01::1 --listen-address
2001:db8:ac10:fd01::1 --listen-address 10.24.10.1 --dhcp-range
192.168.122.2,192.168.122.254
--dhcp-leasefile=/usr/local/var/lib/libvirt/dnsmasq/default.leases
--dhcp-lease-max=253 --dhcp-no-override]
... FAILED
7) Network XML-2-Argv nat-network-dns-hosts ...
Expect [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file=
--except-interface lo --listen-address 192.168.122.1
--addn-hosts=/var/lib/libvirt/dnsmasq/default.addnhosts]
Actual [/usr/sbin/dnsmasq --strict-order --bind-interfaces --conf-file=
--except-interface lo --listen-address 192.168.122.1
--addn-hosts=/usr/local/var/lib/libvirt/dnsmasq/default.addnhosts]
... FAILED
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/libvir-list/attachments/20110628/4a94b959/attachment-0001.htm>
More information about the libvir-list
mailing list