[libvirt] [PATCH 7/7] support multifunction PCI device
Daniel P. Berrange
berrange at redhat.com
Fri Jun 3 13:35:20 UTC 2011
On Fri, May 27, 2011 at 06:23:16PM +0800, Wen Congyang wrote:
> If qemu supports multi function PCI device, the format of the PCI address passed
> to qemu is "bus=pci.0,multifunction=on,addr=slot.function".
>
> If qemu does not support multi function PCI device, the format of the PCI address
> passed to qemu is "bus=pci.0,addr=slot".
> ---
> src/conf/domain_conf.c | 3 +++
> src/qemu/qemu_command.c | 27 +++++++++++++++++++++------
> 2 files changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
> index 8ff155b..6d70efd 100644
> --- a/src/conf/domain_conf.c
> +++ b/src/conf/domain_conf.c
> @@ -1296,6 +1296,9 @@ int virDomainDeviceAddressIsValid(virDomainDeviceInfoPtr info,
>
> int virDomainDevicePCIAddressIsValid(virDomainDevicePCIAddressPtr addr)
> {
> + /* PCI bus has 32 slots and 8 functions per slot */
> + if (addr->slot >= 32 || addr->function >= 8)
> + return 0;
> return addr->domain || addr->bus || addr->slot;
> }
>
> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
> index da18719..21c7cdb 100644
> --- a/src/qemu/qemu_command.c
> +++ b/src/qemu/qemu_command.c
> @@ -1251,10 +1251,20 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
> _("Only PCI device addresses with bus=0 are supported"));
> return -1;
> }
> - if (info->addr.pci.function != 0) {
> - qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> - _("Only PCI device addresses with function=0 are supported"));
> - return -1;
> + if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIFUNCTION)) {
> + if (info->addr.pci.function > 7) {
> + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> + _("The function of PCI device addresses must "
> + "less than 8"));
> + return -1;
> + }
> + } else {
> + if (info->addr.pci.function != 0) {
> + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> + _("Only PCI device addresses with function=0 "
> + "are supported"));
> + return -1;
> + }
> }
>
> /* XXX
> @@ -1264,9 +1274,14 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
> * to pciNN.0 where NN is the domain number
> */
> if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIBUS))
> - virBufferAsprintf(buf, ",bus=pci.0,addr=0x%x", info->addr.pci.slot);
> + virBufferAsprintf(buf, ",bus=pci.0");
> + else
> + virBufferAsprintf(buf, ",bus=pci");
> + if (qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_MULTIFUNCTION))
> + virBufferAsprintf(buf, ",multifunction=on,addr=0x%x.0x%x",
> + info->addr.pci.slot, info->addr.pci.function);
> else
> - virBufferAsprintf(buf, ",bus=pci,addr=0x%x", info->addr.pci.slot);
> + virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot);
> }
> return 0;
> }
ACK
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
More information about the libvir-list
mailing list