[libvirt] virsh nodedev-dempxml is not supported by the connection driver

guan qin qinguan0619 at gmail.com
Mon May 9 12:24:00 UTC 2011 

OK,I recompile with  "#./configure --prefix=/usr --libdir=/usr/lib64
--localstatedir=/var --sysconfdir=/etc --with-hal=yes --with-udev=yes
--with-polkit=yes",now I can use the command "virsh nodedev-list".

thank you very much!

best regards,
qinguan

在 2011年5月9日 下午8:04，guan qin <qinguan0619 at gmail.com>写道：

> I do as you said ,and find one machine can work well,but the other is still
> can't work.
> I check the Configuration summary ,find that compare to the machine can't
> work,
> the machine working well has an item: "polkit: /usr/bin/pkcheck (version
> 1)"
> what's the polkit ? can I configure the libvirt with "--with-polkit=yes" ?
>
> the machine works well:
> Configuration summary:
> configure: =====================
> configure:
> configure: Drivers
> configure:
> configure:      Xen: yes
> configure:     QEMU: yes
> configure:      UML: yes
> configure:   OpenVZ: yes
> configure:   VMware: yes
> configure:     VBox: yes
> configure:   XenAPI: no
> configure: xenlight: no
> configure:      LXC: yes
> configure:     PHYP: no
> configure:      ESX: no
> configure:     Test: yes
> configure:   Remote: yes
> configure:  Network: yes
> configure: Libvirtd: yes
> configure:    netcf: no
> configure:  macvtap: yes
> configure: virtport: no
> configure:
> configure: Storage Drivers
> configure:
> configure:      Dir: yes
> configure:       FS: yes
> configure:    NetFS: yes
> configure:      LVM: yes
> configure:    iSCSI: no
> configure:     SCSI: yes
> configure:    mpath: yes
> configure:     Disk: no
> configure:
> configure: Security Drivers
> configure:
> configure:  SELinux: yes
> configure: AppArmor: no
> configure:
> configure: Driver Loadable Modules
> configure:
> configure:   dlopen: no
> configure:
> configure: Libraries
> configure:
> configure:   libxml: -I/usr/include/libxml2   -lxml2
> configure:  libcurl: no
> configure:  libssh2: no
> configure:   gnutls:   -lgnutls   -lgcrypt
> configure:     sasl: no
> configure:     yajl: no
> configure:    avahi: no
> configure:   polkit: /usr/bin/pkcheck (version 1)
> configure:    audit: no
> configure:  selinux:  -lselinux
> configure: apparmor: no
> configure:  numactl: no
> configure:    capng: no
> configure:      xen:   -lxenstore
> configure:   xenapi: no
> configure: xenlight: no
> configure:      hal: -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/hal
> -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include   -lhal -ldbus-1
> -lpthread -lrt
> configure:     udev:   -ludev     -lpciaccess
> configure:    netcf: no
> configure:     pcap: no
> configure:       nl:   -lnl
> configure:    mscom: no
> configure:      xdr:
> configure:
> configure: Test suite
> configure:
> configure:    Coverage: no
> configure:   Alloc OOM: no
> configure:
> configure: Miscellaneous
> configure:
> configure:         Debug: yes
> configure:      Warnings: maximum
> configure:      Readline: no
> configure:        Python: no
> configure:        DTrace: no
> configure:   XML Catalog: /etc/xml/catalog
> configure:
> configure: Privileges
> configure:
> configure:       QEMU: root:root
> configure:
> root at Optiplex-780:/home/qinguan/libvirt-0.9.0# virsh nodedev-dumpxml
> pci_0000_00_19_0
> <device>
>   <name>pci_0000_00_19_0</name>
>   <parent>computer</parent>
>   <driver>
>     <name>e1000e</name>
>   </driver>
>   <capability type='pci'>
>     <domain>0</domain>
>     <bus>0</bus>
>     <slot>25</slot>
>     <function>0</function>
>     <product id='0x10de'>82567LM-3 Gigabit Network Connection</product>
>     <vendor id='0x8086'>Intel Corporation</vendor>
>   </capability>
> </device>
> root at Optiplex-780:/home/qinguan/libvirt-0.9.0#
>
> the machine still can't work:
> configure: Configuration summary
> configure: =====================
> configure:
> configure: Drivers
> configure:
> configure:      Xen: no
> configure:     QEMU: yes
> configure:      UML: yes
> configure:   OpenVZ: yes
> configure:   VMware: yes
> configure:     VBox: yes
> configure:   XenAPI: no
> configure: xenlight: no
> configure:      LXC: yes
> configure:     PHYP: no
> configure:      ESX: no
> configure:     Test: yes
> configure:   Remote: yes
> configure:  Network: yes
> configure: Libvirtd: yes
> configure:    netcf: no
> configure:  macvtap: yes
> configure: virtport: no
> configure:
> configure: Storage Drivers
> configure:
> configure:      Dir: yes
> configure:       FS: yes
> configure:    NetFS: yes
> configure:      LVM: yes
> configure:    iSCSI: no
> configure:     SCSI: yes
> configure:    mpath: yes
> configure:     Disk: no
> configure:
> configure: Security Drivers
> configure:
> configure:  SELinux: yes
> configure: AppArmor: no
> configure:
> configure: Driver Loadable Modules
> configure:
> configure:   dlopen: no
> configure:
> configure: Libraries
> configure:
> configure:   libxml: -I/usr/include/libxml2   -lxml2
> configure:  libcurl: no
> configure:  libssh2: no
> configure:   gnutls:   -lgnutls   -lgcrypt
> configure:     sasl: no
> configure:     yajl: no
> configure:    avahi: no
> configure:   polkit: no
> configure:    audit: no
> configure:  selinux:  -lselinux
> configure: apparmor: no
> configure:  numactl: no
> configure:    capng: no
> configure:      xen: no
> configure:   xenapi: no
> configure: xenlight: no
> configure:      hal: -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/hal
> -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include   -lhal -ldbus-1
> -lpthread -lrt
> configure:     udev:   -ludev     -lpciaccess
> configure:    netcf: no
> configure:     pcap: no
> configure:       nl:   -lnl
> configure:    mscom: no
> configure:      xdr:
> configure:
> configure: Test suite
> configure:
> configure:    Coverage: no
> configure:   Alloc OOM: no
> configure:
> configure: Miscellaneous
> configure:
> configure:         Debug: yes
> configure:      Warnings: maximum
> configure:      Readline: no
> configure:        Python: no
> configure:        DTrace: no
> configure:   XML Catalog: /etc/xml/catalog
> configure:
> configure: Privileges
> configure:
> configure:       QEMU: root:root
> configure:
> root at shahe26:~/libvirt-0.9.0# virsh
> Welcome to virsh, the virtualization interactive terminal.
>
> Type:  'help' for help with commands
>        'quit' to quit
>
> virsh # ^C
> root at shahe26:~/libvirt-0.9.0# virsh nodedev-dumpxml pci_0000_01_00_1
> error: Could not find matching device 'pci_0000_01_00_1'
>
> error: this function is not supported by the connection driver:
> virNodeDeviceLookupByName
>
> root at shahe26:~/libvirt-0.9.0# virsh nodedev-list
>
> error: Failed to count node devices
> error: this function is not supported by the connection driver:
> virNodeNumOfDevices
>
> root at shahe26:~/libvirt-0.9.0# dpkg -l | grep udev
> ii  libudev-dev                         164-3
> libudev development files
>
> ii  libudev0                            164-3
> libudev shared library
> ii  udev                                164-3
> /dev/ and hotplug management daemon
>
>
>
> best regards,
> qinguan
>
>
> 2011/5/9 Osier Yang <jyang at redhat.com>
>
>> 于 2011年05月09日 17:43, guan qin 写道:
>>
>>  thanks for your reply !
>>> At first ,I use " apt-get install libvirt-bin " to install the libvirt
>>> ,the version is 0.8.3 ,and "virsh nodedev-list" works well .
>>> but I need the version 0.9.0. So I complied the libvirt use source code
>>> as follows:
>>> #./configure --prefix=/usr --libdir=/usr/lib64 --localstatedir=/var
>>> --sysconfdir=/etc
>>> #make
>>> #make install
>>> can you tell me how to complie the libvirt with udev and hal ?
>>>
>>
>> I'm not sure how ubuntu do pkgs, on FC14, devel pkg is seperated.
>> # rpm -q hal-devel
>> hal-devel-0.5.14-5.fc14.1.x86_64
>>
>> Anyway, you can get prompt if don't have the required pkgs by:
>>
>>
>> #./configure --prefix=/usr --libdir=/usr/lib64 --localstatedir=/var
>> --sysconfdir=/etc --with-hal=yes --with-udev=yes
>>
>> Regards
>> Osier
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/libvir-list/attachments/20110509/3c564f00/attachment-0001.htm>

More information about the libvir-list mailing list