[libvirt] [PATCH 5/8] Enable the blkdeviotune command in virsh
Adam Litke
agl at us.ibm.com
Thu Nov 10 20:27:00 UTC 2011
OK.
On Thu, Nov 10, 2011 at 04:32:55AM +0800, Lei HH Li wrote:
> Support virsh command blkdeviotune. Can set or query a block disk
> I/O throttle setting.
>
> Signed-off-by: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com>
> Signed-off-by: Lei Li <lilei at linux.vnet.ibm.com>
> ---
> tools/virsh.c | 146 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> tools/virsh.pod | 23 +++++++++
> 2 files changed, 169 insertions(+), 0 deletions(-)
>
> diff --git a/tools/virsh.c b/tools/virsh.c
> index 83dc3c7..df2b399 100644
> --- a/tools/virsh.c
> +++ b/tools/virsh.c
> @@ -6023,6 +6023,151 @@ cmdBlockJob(vshControl *ctl, const vshCmd *cmd)
> return true;
> }
>
> +/*
> + * "blkdeviotune" command
> + */
> +static const vshCmdInfo info_blkdeviotune[] = {
> + {"help", N_("Set or query a block disk I/O throttle setting.")},
> + {"desc", N_("Set or query a block disk I/O throttle setting.\n" \
> + " To query the block disk I/O throttle setting use the following" \
> + " command: \n\n" \
> + " virsh # blkdeviotune <domain> <device>")},
> + {NULL, NULL}
> +};
> +
> +static const vshCmdOptDef opts_blkdeviotune[] = {
> + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")},
> + {"device", VSH_OT_DATA, VSH_OFLAG_REQ, N_("block device")},
> + {"total_bytes_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("total throughput limit in bytes per second/s")},
> + {"read_bytes_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("read throughput limit in bytes per second/s")},
> + {"write_bytes_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("write throughput limit in bytes per second/s")},
> + {"total_iops_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("total I/O operations limit per second/s")},
> + {"read_iops_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("read I/O operations limit per second/s")},
> + {"write_iops_sec", VSH_OT_INT, VSH_OFLAG_NONE, N_("write I/O operations limit per second/s")},
> + {"config", VSH_OT_BOOL, 0, N_("affect next boot")},
> + {"live", VSH_OT_BOOL, 0, N_("affect running domain")},
> + {"current", VSH_OT_BOOL, 0, N_("affect current domain")},
> + {NULL, 0, 0, NULL}
> +};
> +
> +static bool
> +cmdBlkdeviotune(vshControl *ctl, const vshCmd *cmd)
> +{
> + virDomainPtr dom = NULL;
> + const char *name, *disk;
> + virDomainBlockIoTuneInfo info;
> + virDomainBlockIoTuneInfo reply;
> + unsigned int flags = 0;
> + int ret = -1;
> + int rv = 0;
> + int set = 0;
> + int current = vshCommandOptBool(cmd, "current");
> + int config = vshCommandOptBool(cmd, "config");
> + int live = vshCommandOptBool(cmd, "live");
> +
> + if (current) {
> + if (live || config) {
> + vshError(ctl, "%s", _("--current must be specified exclusively"));
> + return false;
> + }
> + flags = VIR_DOMAIN_AFFECT_CURRENT;
> + } else {
> + if (config)
> + flags |= VIR_DOMAIN_AFFECT_CONFIG;
> + if (live)
> + flags |= VIR_DOMAIN_AFFECT_LIVE;
> + }
> +
> + memset(&info, 0, sizeof(info));
> +
> + if (!vshConnectionUsability(ctl, ctl->conn))
> + goto out;
> +
> + if (!(dom = vshCommandOptDomain(ctl, cmd, &name)))
> + goto out;
> +
> + if (vshCommandOptString(cmd, "device", &disk) < 0)
> + goto out;
> +
> + if ((rv = vshCommandOptULongLong(cmd, "total_bytes_sec", &info.total_bytes_sec)) < 0) {
> + vshError(ctl, "%s",
> + _("Unable to parse integer parameter"));
> + goto out;
> + } else if (rv > 0) {
> + set++;
> + }
> +
> + if ((rv = vshCommandOptULongLong(cmd, "read_bytes_sec", &info.read_bytes_sec)) < 0) {
> + vshError(ctl, "%s",
> + _("Unable to parse integer parameter"));
> + goto out;
> + } else if (rv > 0) {
> + set++;
> + }
> +
> + if ((rv = vshCommandOptULongLong(cmd, "write_bytes_sec", &info.write_bytes_sec)) < 0) {
> + vshError(ctl, "%s",
> + _("Unable to parse integer parameter"));
> + goto out;
> + } else if (rv > 0) {
> + set++;
> + }
> +
> + if ((rv = vshCommandOptULongLong(cmd, "total_iops_sec", &info.total_iops_sec)) < 0) {
> + vshError(ctl, "%s",
> + _("Unable to parse integer parameter"));
> + goto out;
> + } else if (rv > 0) {
> + set++;
> + }
> +
> + if ((rv = vshCommandOptULongLong(cmd, "read_iops_sec", &info.read_iops_sec)) < 0) {
> + vshError(ctl, "%s",
> + _("Unable to parse integer parameter"));
> + goto out;
> + } else if (rv > 0) {
> + set++;
> + }
> +
> + if ((rv = vshCommandOptULongLong(cmd, "write_iops_sec", &info.write_iops_sec)) < 0) {
> + vshError(ctl, "%s",
> + _("Unable to parse integer parameter"));
> + goto out;
> + } else if (rv > 0) {
> + set++;
> + }
> +
> + if (!set) {
> +
> + ret = virDomainGetBlockIoTune(dom, disk, &reply, flags);
> +
> + if (ret != 0)
> + goto out;
> +
> + vshPrint(ctl, "%-15s %llu\n", _("total_bytes_sec:"), reply.total_bytes_sec);
> + vshPrint(ctl, "%-15s %llu\n", _("read_bytes_sec:"), reply.read_bytes_sec);
> + vshPrint(ctl, "%-15s %llu\n", _("write_bytes_sec:"), reply.write_bytes_sec);
> + vshPrint(ctl, "%-15s %llu\n", _("total_iops_sec:"), reply.total_iops_sec);
> + vshPrint(ctl, "%-15s %llu\n", _("read_iops_sec:"), reply.read_iops_sec);
> + vshPrint(ctl, "%-15s %llu\n", _("write_iops_sec:"), reply.write_iops_sec);
> +
> + virDomainFree(dom);
> + return true;
> + } else {
> +
> + ret = virDomainSetBlockIoTune(dom, disk, &info, flags);
> +
> + if (ret == 0) {
> + virDomainFree(dom);
> + return true;
> + }
> + }
> +
> +out:
> + virDomainFree(dom);
> + return false;
> +}
> +
>
> /*
> * "net-autostart" command
> @@ -14023,6 +14168,7 @@ static const vshCmdDef domManagementCmds[] = {
> {"blkiotune", cmdBlkiotune, opts_blkiotune, info_blkiotune, 0},
> {"blockpull", cmdBlockPull, opts_block_pull, info_block_pull, 0},
> {"blockjob", cmdBlockJob, opts_block_job, info_block_job, 0},
> + {"blkdeviotune", cmdBlkdeviotune, opts_blkdeviotune, info_blkdeviotune, 0},
> #ifndef WIN32
> {"console", cmdConsole, opts_console, info_console, 0},
> #endif
> diff --git a/tools/virsh.pod b/tools/virsh.pod
> index 775d302..58fcb51 100644
> --- a/tools/virsh.pod
> +++ b/tools/virsh.pod
> @@ -572,6 +572,29 @@ operation can be checked with B<blockjob>.
> I<path> specifies fully-qualified path of the disk.
> I<bandwidth> specifies copying bandwidth limit in Mbps.
>
> +=item B<blkdeviotune> I<domain> I<device> [[I<--total_bytes_sec> B<total_bytes_sec>]
> +| [[I<--read_bytes_sec> B<read_bytes_sec>] [I<--write_bytes_sec> B<write_bytes_sec>]]
> +[[I<--total_iops_sec> B<total_iops_sec>] | [[I<--read_iops_sec> B<read_iops_sec>]
> +[I<--write_iops_sec> B<write_iops_sec>]] [[I<--config>] [I<--live>] | [I<--current>]]
> +
> +Set or query the block disk io limits settting.
> +I<path> specifies block disk name.
> +I<--total_bytes_sec> specifies total throughput limit in bytes per second/s.
> +I<--read_bytes_sec> specifies read throughput limit in bytes per second/s.
> +I<--write_bytes_sec> specifies write throughput limit in bytes per second/s.
> +I<--total_iops_sec> specifies total I/O operations limit per second/s.
> +I<--read_iops_sec> specifies read I/O operations limit per second/s.
> +I<--write_iops_sec> specifies write I/O operations limit per second/s.
> +
> +If I<--live> is specified, affect a running guest.
> +If I<--config> is specified, affect the next boot of a persistent guest.
> +If I<--current> is specified, affect the current guest state.
> +Both I<--live> and I<--current> flags may be given, but I<--current> is
> +exclusive. If no flag is specified, behavior is different depending
> +on hypervisor.
> +
> +If no limit is specified, it will query current I/O limits setting.
> +
> =item B<blockjob> I<domain> I<path> [I<--abort>] [I<--info>] [I<bandwidth>]
>
> Manage active block operations.
> --
> 1.7.1
>
--
Adam Litke <agl at us.ibm.com>
IBM Linux Technology Center
More information about the libvir-list
mailing list