October 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Oct 1 01:05:13 UTC 2011
Ending: Mon Oct 31 23:33:24 UTC 2011
Messages: 1495

• [libvirt] [PATCH] virsh: do not unlink NULL file   Marc-André Lureau
• [libvirt] [PATCH] virsh: do not unlink NULL file   Eric Blake
• [libvirt] [PATCH] Set to NULL members that have been freed to prevent crashes   Marc-André Lureau
• [libvirt] [libvirt-glib] enums: fix incorrect prefix strip   Marc-André Lureau
• [libvirt] "Connection does not support host device enumeration"   Kaushal Shriyan
• [libvirt] [PATCHv2 2/2] qemu: make PCI multifunction support more manual   Laine Stump
• [libvirt] [libvirt-glib] Turn GVirStream into a GIOStream   Marc-André Lureau
• [libvirt] [libvirt-glib] event: remove timeout and handle from arrays   Marc-André Lureau
• [libvirt] [PATCH 2/2] snapshot: implement getparent for vbox   Matthias Bolte
• [libvirt] [PATCH 1/2] snapshot: implement getparent for esx   Matthias Bolte
• [libvirt] [libvirt-glib] [PATCH] Explicitly link conn-test example against libgobject   Guido Günther
• [libvirt] [Openstack] [RFC PATCH] lxc: don't return error on GetInfo when cgroups not yet set up   Serge E. Hallyn
• [libvirt] Comment inconsistency in bridge_driver.c   Neil Wilson
• [libvirt] [libvirt-glib] RFC: delay event handle freeing to avoid dead lock   Daniel P. Berrange
• [libvirt] [libvirt-glib] gir: fix introspection of asyncs and array delegate   Daniel P. Berrange
• [libvirt] [libvirt-glib] enums: fix incorrect prefix strip   Daniel P. Berrange
• [libvirt] [libvirt-glib] event: remove timeout and handle from arrays   Daniel P. Berrange
• [libvirt] [libvirt-glib] [PATCH] Explicitly link conn-test example against libgobject   Daniel P. Berrange
• [libvirt] Comment inconsistency in bridge_driver.c   Daniel P. Berrange
• [libvirt] [PATCH v2 01/12] Define keepalive protocol   Daniel P. Berrange
• [libvirt] [PATCH v2 03/12] Introduce two public APIs for keepalive protocol   Daniel P. Berrange
• [libvirt] [PATCH v2 03/12] Introduce two public APIs for keepalive protocol   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/3] Guest NUMA topology support - v0   Bharata B Rao
• [libvirt] [PATCH] bridge_driver.c: Fix autoconf setting   Neil Wilson
• [libvirt] [RFC PATCH 1/2] Add XML definitions for guest NUMA specifications   Bharata B Rao
• [libvirt] [RFC PATCH 2/2] Routines to parse <numa> ... </numa>   Bharata B Rao
• [libvirt] [PATCH v4 0/2] Allow domain reboot after core dump   Michal Privoznik
• [libvirt] [libvirt-glib] [PATCH] Explicitly link conn-test example against libgobject   Guido Günther
• [libvirt] hugepages error: "hugetlbfs filesystem is not mounted"   Shahar Havivi
• [libvirt] hugepages error: "hugetlbfs filesystem is not mounted"   Shahar Havivi
• [libvirt] hugepages error: "hugetlbfs filesystem is not mounted"   Daniel P. Berrange
• [libvirt] [PATCH 1/2] snapshot: implement getparent for esx   Eric Blake
• [libvirt] [PATCH v2 0/2] Allow to make disk optional on migration   Michal Privoznik
• [libvirt] [PATCH v2 1/2] migration: Introduce <migration> element for cdrom and floppy   Michal Privoznik
• [libvirt] [PATCH v2 2/2] qemu: Implement migration optional disk   Michal Privoznik
• [libvirt] hugepages error: "hugetlbfs filesystem is not mounted"   Shahar Havivi
• [libvirt] hugepages error: "hugetlbfs filesystem is not mounted"   Daniel P. Berrange
• [libvirt] Comment inconsistency in bridge_driver.c   Neil Wilson
• [libvirt] [PATCH 2/2] snapshot: implement getparent for vbox   Eric Blake
• [libvirt] hugepages error: "hugetlbfs filesystem is not mounted"   Shahar Havivi
• [libvirt] [RFC PATCH] lxc: don't return error on GetInfo when cgroups not yet set up   Daniel P. Berrange
• [libvirt] [PATCH] Add support for bandwidth filtering on LXC guests   Daniel P. Berrange
• [libvirt] [PATCH] Add support for bandwidth filtering on LXC guests   Eric Blake
• [libvirt] [PATCH] Add support for bandwidth filtering on LXC guests   Michal Privoznik
• [libvirt] [PATCH] Allow passing of command line args to LXC container   Daniel P. Berrange
• [libvirt] [PATCH] Allow passing of command line args to LXC container   Eric Blake
• [libvirt] [PATCH] Set to NULL members that have been freed to prevent crashes   Eric Blake
• [libvirt] [PATCHv2 8/7] snapshot: implement snapshot roots listing in esx   Eric Blake
• [libvirt] [PATCHv2 9/7] snapshot: simplify esx snapshot name lookup   Eric Blake
• [libvirt] [PATCHv2 10/7] snapshot: implement snapshot children listing in esx   Eric Blake
• [libvirt] [RFC PATCH] lxc: don't return error on GetInfo when cgroups not yet set up   Serge E. Hallyn
• [libvirt] [PATCH] Document that ff callbacks need to be invoked from a clean stack   Guido Günther
• [libvirt] [PATCH] Add AHCI support to qemu driver   Adam Litke
• [libvirt] [PATCHv2 11/7] snapshot: optimize vbox snapshot name lookup   Eric Blake
• [libvirt] [PATCHv2 12/7] snapshot: implement snapshot roots listing in esx   Eric Blake
• [libvirt] [PATCHv2 13/7] snapshot: implement snapshot children listing in vbox   Eric Blake
• [libvirt] bug: try to take disk snapshot for LVM2 Volume   MATSUDA, Daiki
• [libvirt] [PATCH] bridge_driver.c: Fix autoconf setting   Laine Stump
• [libvirt] question for virsh vcpupin enhancement   KAMEZAWA Hiroyuki
• [libvirt] [PATCH] network: fill in bandwidth from portgroup for all forward modes   Laine Stump
• [libvirt] [PATCH] Add AHCI support to qemu driver   Jim Fehlig
• [libvirt] [RFC PATCH] lxc: don't return error on GetInfo when cgroups not yet set up   Daniel P. Berrange
• [libvirt] [PATCH] Document that ff callbacks need to be invoked from a clean stack   Daniel P. Berrange
• [libvirt] [PATCH] qemu: Fix migration with dname   Jiri Denemark
• [libvirt] [RFC] Adding new filesystem 'proxy' to 9p   M. Mohan Kumar
• [libvirt] [PATCH] Add AHCI support to qemu driver   Adam Litke
• [libvirt] [PATCH] network: fill in bandwidth from portgroup for all forward modes   Daniel P. Berrange
• [libvirt] [PATCH] Make LXC work with new network configuration types   Daniel P. Berrange
• [libvirt] [PATCH] qemu: Fix migration with dname   Daniel P. Berrange
• [libvirt] [PATCH] network: fill in bandwidth from portgroup for all forward modes   Laine Stump
• [libvirt] [PATCH] qemu: Fix migration with dname   Jiri Denemark
• [libvirt] [PATCH] Make LXC work with new network configuration types   Laine Stump
• [libvirt] [PATCH] qemu: Fix migration with dname   Jiri Denemark
• [libvirt] [PATCH] qemu: Fix migration with dname   Eric Blake
• [libvirt] [PATCH] build: fix 'make distcheck' with pdwtags installed   Eric Blake
• [libvirt] [PATCH] init: raise default system aio limits   Eric Blake
• [libvirt] [RFC] security_dac: don't chown iso file   Serge E. Hallyn
• [libvirt] [PATCH] Document that ff callbacks need to be invoked from a clean stack   Guido Günther
• [libvirt] [PATCH 0/2] qemu: fix disk error_policy problems   Laine Stump
• [libvirt] [PATCH 1/2] qemu: correct misspelled 'enospc' option, and only use for werror   Laine Stump
• [libvirt] [PATCH 2/2] qemu: add separate rerror_policy for disk errors   Laine Stump
• [libvirt] [PATCH] init: raise default system aio limits   Laine Stump
• [libvirt] [RFC PATCH] snapshot: better virsh handling of missing current, parent   Laine Stump
• [libvirt] [PATCH 1/2] qemu: correct misspelled 'enospc' option, and only use for werror   Eric Blake
• [libvirt] [PATCH 1/2] snapshot: add REVERT_FORCE to API   Laine Stump
• [libvirt] [PATCH 2/2] snapshot: enforce REVERT_FORCE on qemu   Laine Stump
• [libvirt] [PATCH 1/2] snapshot: add REVERT_FORCE to API   Eric Blake
• [libvirt] [PATCH 2/2] qemu: add separate rerror_policy for disk errors   Eric Blake
• [libvirt] [RFC PATCH] snapshot: better virsh handling of missing current, parent   Eric Blake
• [libvirt] [PATCH 2/2] snapshot: enforce REVERT_FORCE on qemu   Eric Blake
• [libvirt] [PATCH 2/2] snapshot: enforce REVERT_FORCE on qemu   Eric Blake
• [libvirt] "Connection does not support host device enumeration"   Kaushal Shriyan
• [libvirt] Qemu/KVM guest boots 2x slower with vhost_net   Reeted
• [libvirt] [PATCH 1.5/2] snapshot: use qemu-img on disks in use at time of snapshot   Eric Blake
• [libvirt] "Connection does not support host device enumeration"   Dave Allan
• [libvirt] [PATCH] Add AHCI support to qemu driver   Bruce Rogers
• [libvirt] [PATCH 1/2] qemu: correct misspelled 'enospc' option, and only use for werror   Laine Stump
• [libvirt] [PATCHv2 8/7] snapshot: implement snapshot roots listing in esx   Matthias Bolte
• [libvirt] [PATCHv2 9/7] snapshot: simplify esx snapshot name lookup   Matthias Bolte
• [libvirt] [PATCHv2 10/7] snapshot: implement snapshot children listing in esx   Matthias Bolte
• [libvirt] [PATCH] qemu: Fix migration with dname   Jiri Denemark
• [libvirt] [PATCHv2 11/7] snapshot: optimize vbox snapshot name lookup   Matthias Bolte
• [libvirt] [PATCHv2 12/7] snapshot: implement snapshot roots listing in esx   Matthias Bolte
• [libvirt] [PATCHv2 13/7] snapshot: implement snapshot children listing in vbox   Matthias Bolte
• [libvirt] [RFC] security_dac: don't chown iso file   Daniel P. Berrange
• [libvirt] [RFC] security_dac: don't chown iso file   Serge E. Hallyn
• [libvirt] [PATCH 1/2] qemu: correct misspelled 'enospc' option, and only use for werror   Paolo Bonzini
• [libvirt] [PATCH] qemu: Don't fail virDomainGetInfo if we can't update balloon info   Jiri Denemark
• [libvirt] [PATCH] qemu: Fix migration with dname   Eric Blake
• [libvirt] [PATCH] qemu: Don't fail virDomainGetInfo if we can't update balloon info   Eric Blake
• [libvirt] [RFC] security_dac: don't chown iso file   Laine Stump
• [libvirt] [PATCHv2 8/7] snapshot: implement snapshot roots listing in esx   Eric Blake
• [libvirt] [PATCH 1.5/2] snapshot: use qemu-img on disks in use at time of snapshot   Laine Stump
• [libvirt] [RFC] security_dac: don't chown iso file   Serge Hallyn
• [libvirt] [PATCH] qemu: Don't fail virDomainGetInfo if we can't update balloon info   Jiri Denemark
• [libvirt] [PATCHv2 12/7] snapshot: implement snapshot roots listing in esx   Eric Blake
• [libvirt] [RFC PATCHv2 0/9] DHCP snooping support for libvirt.   David L Stevens
• [libvirt] [RFC PATCHv2 1/9] support continue/return   David L Stevens
• [libvirt] [RFC PATCHv2 2/9] allow required ARP packets   David L Stevens
• [libvirt] [RFC PATCHv2 3/9] reverse sense of address matching   David L Stevens
• [libvirt] [RFC PATCHv2 4/9] make default chain policy "DROP"   David L Stevens
• [libvirt] [RFC PATCHv2 5/9] allow chain modification   David L Stevens
• [libvirt] [RFC PATCHv2 6/9] support addRules   David L Stevens
• [libvirt] [RFC PATCHv2 7/9] support variable value changing   David L Stevens
• [libvirt] [RFC PATCHv2 8/9] add DHCP snooping   David L Stevens
• [libvirt] [RFC PATCHv2 9/9] add leasefile support   David L Stevens
• [libvirt] [PATCHv2 11/7] snapshot: optimize vbox snapshot name lookup   Eric Blake
• [libvirt] [RFC PATCHv2 3/9] reverse sense of address matching   Daniel P. Berrange
• [libvirt] [RFC PATCHv2 4/9] make default chain policy "DROP"   Daniel P. Berrange
• [libvirt] [RFC PATCHv2 3/9] reverse sense of address matching   David Stevens
• [libvirt] [RFC PATCHv2 4/9] make default chain policy "DROP"   David Stevens
• [libvirt] [RFC PATCHv2 4/9] make default chain policy "DROP"   Daniel P. Berrange
• [libvirt] [PATCH 2/2] snapshot: enforce REVERT_FORCE on qemu   Eric Blake
• [libvirt] [PATCH 2/2] snapshot: enforce REVERT_FORCE on qemu   Eric Blake
• [libvirt] [RFC PATCHv2 4/9] make default chain policy "DROP"   David Stevens
• [libvirt] [PATCH 0/4] Add support for QEMU guest agent control   Daniel P. Berrange
• [libvirt] [PATCH 1/4] QEMU guest agent support   Daniel P. Berrange
• [libvirt] [PATCH 2/4] Add new virDomainShutdownFlags API   Daniel P. Berrange
• [libvirt] [PATCH 3/4] Wire up QEMU agent to reboot/shutdown APIs   Daniel P. Berrange
• [libvirt] [PATCH 4/4] Allow choice of shutdown method via virsh   Daniel P. Berrange
• [libvirt] [PATCH] maint: fix minor issues in virterror public header   Eric Blake
• [libvirt] virsh bash completion file   Serge E. Hallyn
• [libvirt] virsh bash completion file   Eric Blake
• [libvirt] [PATCH] init: raise default system aio limits   Eric Blake
• [libvirt] virsh bash completion file   Serge E. Hallyn
• [libvirt] [PATCH] qemu: enable multifunction for older qemu   Eric Blake
• [libvirt] [PATCH 1/4] QEMU guest agent support   Eric Blake
• [libvirt] [PATCH 2/4] Add new virDomainShutdownFlags API   Eric Blake
• [libvirt] [PATCH 3/4] Wire up QEMU agent to reboot/shutdown APIs   Eric Blake
• [libvirt] [PATCH 4/4] Allow choice of shutdown method via virsh   Eric Blake
• [libvirt] [PATCH] qemu: enable multifunction for older qemu   Laine Stump
• [libvirt] [PATCH 1.5/2] qemu: leave rerror policy at default when enospace is requested   Laine Stump
• [libvirt] [PATCHv2 2/2] qemu: add separate rerror_policy for disk errors   Laine Stump
• [libvirt] [PATCH] qemu: enable multifunction for older qemu   Wen Congyang
• [libvirt] virsh bash completion file   Daniel P. Berrange
• [libvirt] virsh bash completion file   Daniel P. Berrange
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Guido Günther
• [libvirt] [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty   Guido Günther
• [libvirt] [PATCH] Fix deadlock when the RPC program is unknown   Daniel P. Berrange
• [libvirt] [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty   Michal Privoznik
• [libvirt] [PATCH] Don't send back unknown program errors for async messages   Daniel P. Berrange
• [libvirt] [PATCH] Make saving domain XML more robust   Jiri Denemark
• [libvirt] [PATCH] Make saving domain XML more robust   Daniel P. Berrange
• [libvirt] [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty   Guido Günther
• [libvirt] [PATCH] Document STR(N)EQ_NULLABLE (was Re: [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty)   Guido Günther
• [libvirt] [PATCH] Fail gracefully when hashtables are NULL   Marc-André Lureau
• [libvirt] [PATCH v2 03/12] Introduce two public APIs for keepalive protocol   Jiri Denemark
• [libvirt] virsh bash completion file   Serge E. Hallyn
• [libvirt] virsh bash completion file   Daniel P. Berrange
• [libvirt] [PATCH] remote_driver: Avoid double free in EventControl building   Michal Privoznik
• [libvirt] [PATCH] Fix deadlock when the RPC program is unknown   Michal Privoznik
• [libvirt] [PATCH] Don't send back unknown program errors for async messages   Eric Blake
• [libvirt] [PATCH] Document STR(N)EQ_NULLABLE (was Re: [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty)   Eric Blake
• [libvirt] [PATCH] Document STR(N)EQ_NULLABLE (was Re: [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty)   Guido Günther
• [libvirt] [PATCH] Document STR(N)EQ_NULLABLE (was Re: [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty)   Eric Blake
• [libvirt] [libvirt-glib] API to deal with storage pool(s)   Christophe Fergeau
• [libvirt] [PATCH] qemu: enable multifunction for older qemu   Eric Blake
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Eric Blake
• [libvirt] [PATCH 1.5/2] qemu: leave rerror policy at default when enospace is requested   Eric Blake
• [libvirt] [PATCHv2 2/2] qemu: add separate rerror_policy for disk errors   Eric Blake
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Guido Günther
• [libvirt] [libvirt-glib] API to deal with storage pool(s)   Daniel P. Berrange
• [libvirt] [libvirt-glib 1/3] Don't use empty message when building a GError   Christophe Fergeau
• [libvirt] [libvirt-glib 2/3] Don't use empty message when building a GError   Christophe Fergeau
• [libvirt] [libvirt-glib 3/3] Only call gvir_error_new after failed libvirt calls   Christophe Fergeau
• [libvirt] [libvirt-glib] Turn GVirStream into a GIOStream   Christophe Fergeau
• [libvirt] [PATCH] remote_driver: Avoid double free in EventControl building   Eric Blake
• [libvirt] [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty   Eric Blake
• [libvirt] [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty   Guido Günther
• [libvirt] [PATCH] build: fix 'make distcheck' with pdwtags installed   Laine Stump
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Laine Stump
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Guido Günther
• [libvirt] [PATCH] Document STR(N)EQ_NULLABLE (was Re: [PATCH 2/2] xenParseXM: don't dereference NULL pointer when script is empty)   Guido Günther
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Eric Blake
• [libvirt] [PATCH 0/2] snapshot: allow editing disk-only snapshots   Eric Blake
• [libvirt] [PATCH 1/2] snapshot: let virsh edit disk snapshots   Eric Blake
• [libvirt] [PATCH 2/2] snapshot: simplify redefinition of disk snapshot   Eric Blake
• [libvirt] [PATCH 14/7] snapshot: virsh shorthand for operating on current snap   Eric Blake
• [libvirt] [PATCHv2 13/7] snapshot: implement snapshot children listing in vbox   Eric Blake
• [libvirt] [PATCH] build: fix 'make distcheck' with pdwtags installed   Eric Blake
• [libvirt] [PATCH] remote_driver: Avoid double free in EventControl building   Michal Privoznik
• [libvirt] [PATCHv2 13/7] snapshot: implement snapshot children listing in vbox   Matthias Bolte
• [libvirt] [libvirt-glib 1/3] Don't use empty message when building a GError   Daniel P. Berrange
• [libvirt] [PATCH] virsh: Update the help information for undefine command.   tangchen
• [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches   Christophe Fergeau
• [libvirt] [libvirt-glib 01/23] Add helpers in libvirt-gconfig-helpers.[ch]   Christophe Fergeau
• [libvirt] [libvirt-glib 02/23] gvir_config_object_parse: don't parse empty documents   Christophe Fergeau
• [libvirt] [libvirt-glib 03/23] Add getters for GVirConfig xmlNode and xmlDoc   Christophe Fergeau
• [libvirt] [libvirt-glib 04/23] Add GVirConfigObject::node property   Christophe Fergeau
• [libvirt] [libvirt-glib 05/23] Add GVir::Config::Domain::name property   Christophe Fergeau
• [libvirt] [libvirt-glib 06/23] Rename gvir_config_domain_new   Christophe Fergeau
• [libvirt] [libvirt-glib 07/23] Add gvir_config_domain_new to create an empty domain   Christophe Fergeau
• [libvirt] [libvirt-glib 08/23] Implement gvir_config_domain_set_name   Christophe Fergeau
• [libvirt] [libvirt-glib 09/23] Make the GVirConfigDomain::name property writable   Christophe Fergeau
• [libvirt] [libvirt-glib 10/23] Add gvir_config_object_to_xml   Christophe Fergeau
• [libvirt] [libvirt-glib 11/23] Use gvir_config_object_to_xml   Christophe Fergeau
• [libvirt] [libvirt-glib 12/23] Add domain creation/parsing test   Christophe Fergeau
• [libvirt] [libvirt-glib 13/23] Remove GVirConfigObject::docHandle   Christophe Fergeau
• [libvirt] [libvirt-glib 14/23] Remove xml parsing from gvir_config_*_new functions   Christophe Fergeau
• [libvirt] [libvirt-glib 15/23] Only do XML parsing when creating config objects   Christophe Fergeau
• [libvirt] [libvirt-glib 16/23] Remove GError argument from GVirConfigObject::node getter   Christophe Fergeau
• [libvirt] [libvirt-glib 17/23] Remove GVirConfigObject::doc   Christophe Fergeau
• [libvirt] [libvirt-glib 18/23] Add gvir_config_object_get_node_content   Christophe Fergeau
• [libvirt] [libvirt-glib 19/23] Add gvir_config_object_set_node_content   Christophe Fergeau
• [libvirt] [libvirt-glib 20/23] Add test-domain-duplicate.xml which currently fails   Christophe Fergeau
• [libvirt] [libvirt-glib 21/23] Validate document in parsing test   Christophe Fergeau
• [libvirt] [libvirt-glib 22/23] Add GVirConfigDomain::memory   Christophe Fergeau
• [libvirt] [libvirt-glib 23/23] Add GVirConfigDomain::features   Christophe Fergeau
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Guido Günther
• [libvirt] [PATCH] Introduce <driver> under <filesystem> to support open-by-handle.   Harsh Prateek Bora
• [libvirt] [PATCH 0/5 v2] Improve Ceph Qemu+RBD support   Wido den Hollander
• [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches   Zeeshan Ali (Khattak)
• [libvirt] [PATCH 0/5 v2] Improve Ceph Qemu+RBD support   Daniel P. Berrange
• [libvirt] [PATCH] snapshot: fix virsh error message typo   Eric Blake
• [libvirt] [PATCH 1/2] snapshot: let virsh edit disk snapshots   Daniel Veillard
• [libvirt] [PATCH 2/2] snapshot: simplify redefinition of disk snapshot   Daniel Veillard
• [libvirt] [PATCH 1/2] snapshot: let virsh edit disk snapshots   Eric Blake
• [libvirt] [libvirt-tck] Fix labels in SELINUX tests   Guido Günther
• [libvirt] [libvirt-tck] Fix labels in SELINUX tests   Eric Blake
• [libvirt] [libvirt-tck] Fix labels in SELINUX tests   Guido Günther
• [libvirt] [PATCH] virsh: Update the help information for undefine command.   Eric Blake
• [libvirt] [PATCH 0/7] Update systemtap probing   Daniel P. Berrange
• [libvirt] [PATCH 1/7] Make libvirt.so include the RPC server code   Daniel P. Berrange
• [libvirt] [PATCH 2/7] If receiving a stream error, mark EOF on the stream   Daniel P. Berrange
• [libvirt] [PATCH 3/7] Add virSocketRef API to facilitate dynamic probing   Daniel P. Berrange
• [libvirt] [PATCH 4/7] Refactor TLS to facilitate dynamic probing   Daniel P. Berrange
• [libvirt] [PATCH 5/7] Fix missing lock calls on virNetTLSContextRef   Daniel P. Berrange
• [libvirt] [PATCH 6/7] Rewrite all the DTrace/SystemTAP probing   Daniel P. Berrange
• [libvirt] [PATCH 7/7] Update examples for probing with systemtap   Daniel P. Berrange
• [libvirt] [PATCH 0/7] Update systemtap probing   Eric Blake
• [libvirt] [PATCH 1/7] Make libvirt.so include the RPC server code   Eric Blake
• [libvirt] [PATCH 2/7] If receiving a stream error, mark EOF on the stream   Eric Blake
• [libvirt] [PATCH 3/7] Add virSocketRef API to facilitate dynamic probing   Eric Blake
• [libvirt] [PATCH 4/7] Refactor TLS to facilitate dynamic probing   Eric Blake
• [libvirt] [PATCH 5/7] Fix missing lock calls on virNetTLSContextRef   Eric Blake
• [libvirt] [PATCH 6/7] Rewrite all the DTrace/SystemTAP probing   Eric Blake
• [libvirt] [PATCH 7/7] Update examples for probing with systemtap   Eric Blake
• [libvirt] [RFC PATCH 0/4] powerpc : Libvirt for the PowerPC platform   Prerna Saxena
• [libvirt] [RFC PATCH 1/4] powerpc: Use Sysfs to gather host info   Prerna Saxena
• [libvirt] [RFC PATCH 2/4] powerpc: Add cpu driver for powerpc host   Prerna Saxena
• [libvirt] [RFC PATCH 3/4] powerpc: Add support for qemu-system-ppc64 in qemu capabilities   Prerna Saxena
• [libvirt] [RFC PATCH 4/4] powerpc: Remove incompatible command line options from qemu startup   Prerna Saxena
• [libvirt] [PATCH 1/2] snapshot: sort snapshot-list --tree   Eric Blake
• [libvirt] [PATCH 2/2] snapshot: avoid accidental renames with snapshot-edit   Eric Blake
• [libvirt] [PATCH 0/4] snapshot: optimize qemu relationship traversal   Eric Blake
• [libvirt] [PATCH 1/4] snapshot: framework for more efficient relation traversal   Eric Blake
• [libvirt] [PATCH 2/4] snapshot: track qemu snapshot relations   Eric Blake
• [libvirt] [PATCH 3/4] snapshot: take advantage of new relations   Eric Blake
• [libvirt] [PATCH 4/4] snapshot: drop dead parameters   Eric Blake
• [libvirt] [PATCH 0/4] snapshot: optimize qemu relationship traversal   Eric Blake
• [libvirt] [PATCH] virsh: Update the help information for undefine command.   tangchen
• [libvirt] [PATCH 0/3] snapshot: another snapshot-list filter   Eric Blake
• [libvirt] [PATCH 1/3] snapshot: add API for filtering by leaves   Eric Blake
• [libvirt] [PATCH 2/3] snapshot: implement LIST_LEAVES flag in qemu   Eric Blake
• [libvirt] [PATCH 3/3] snapshot: implement LIST_LEAVES flag in esx   Eric Blake
• [libvirt] [PATCH] lxc: fix logic bug   Eric Blake
• [libvirt] [PATCH] qemu: silence Coverity false positive   Eric Blake
• [libvirt] New repositories and comments for Code Search   Richard W.M. Jones
• [libvirt] [PATCH] qemuDomainAttach: Initialize pidfile variable   Michal Privoznik
• [libvirt] Qemu/KVM guest boots 2x slower with vhost_net   Reeted
• [libvirt] [PATCH 6/7] Rewrite all the DTrace/SystemTAP probing   Daniel Veillard
• [libvirt] [PATCH 1/2] snapshot: sort snapshot-list --tree   Daniel Veillard
• [libvirt] [PATCH 2/2] snapshot: avoid accidental renames with snapshot-edit   Daniel Veillard
• [libvirt] [PATCH 0/4] snapshot: optimize qemu relationship traversal   Daniel Veillard
• [libvirt] [PATCH 1/4] snapshot: framework for more efficient relation traversal   Daniel Veillard
• [libvirt] [PATCH 2/4] snapshot: track qemu snapshot relations   Daniel Veillard
• [libvirt] [PATCH 3/4] snapshot: take advantage of new relations   Daniel Veillard
• [libvirt] [PATCH 4/4] snapshot: drop dead parameters   Daniel Veillard
• [libvirt] [PATCH 14/7] snapshot: virsh shorthand for operating on current snap   Daniel Veillard
• [libvirt] [PATCHv2 1/7] snapshot: new virDomainSnapshotListChildrenNames API   Daniel Veillard
• [libvirt] [PATCHv2 2/7] snapshot: virsh snapshot-list and children   Daniel Veillard
• [libvirt] [PATCHv2 3/7] snapshot: virsh fallback for snapshot-list --tree --from   Daniel Veillard
• [libvirt] [PATCHv2 4/7] snapshot: virsh fallback for snapshot-list --from children   Daniel Veillard
• [libvirt] [PATCHv2 5/7] snapshot: virsh fallback for snapshot-list --descendants --from   Daniel Veillard
• [libvirt] [PATCHv2 6/7] snapshot: remote protocol for snapshot children   Daniel Veillard
• [libvirt] [PATCHv2 7/7] snapshot: implement snapshot children listing in qemu   Daniel Veillard
• [libvirt] [PATCH] qemu: Do not reattach PCI device used by other domain when shutdown   Osier Yang
• [libvirt] [v2] storage: Do not use comma as seperator for lvs output   Osier Yang
• [libvirt] [PATCH 6/7] Rewrite all the DTrace/SystemTAP probing   Daniel P. Berrange
• [libvirt] [Qemu-devel] [RFC] Adding new filesystem 'proxy' to 9p   Markus Armbruster
• [libvirt] [v2] storage: Do not use comma as seperator for lvs output   Osier Yang
• [libvirt] [PATCH] dissectors: Create dissector for Libvirt RPC   Michal Privoznik
• [libvirt] [RFC PATCH 1/4] powerpc: Use Sysfs to gather host info   Daniel P. Berrange
• [libvirt] [RFC PATCH 2/4] powerpc: Add cpu driver for powerpc host   Daniel P. Berrange
• [libvirt] [RFC PATCH 3/4] powerpc: Add support for qemu-system-ppc64 in qemu capabilities   Daniel P. Berrange
• [libvirt] [RFC PATCH 4/4] powerpc: Remove incompatible command line options from qemu startup   Daniel P. Berrange
• [libvirt] [v2] storage: Do not use comma as seperator for lvs output   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/4] powerpc : Libvirt for the PowerPC platform   Daniel P. Berrange
• [libvirt] [PATCH] Introduce <driver> under <filesystem> to support open-by-handle.   Daniel P. Berrange
• [libvirt] [PATCH] events: Propose a separate lock for event queue   Michal Privoznik
• [libvirt] [PATCH] Introduce <driver> under <filesystem> to support open-by-handle.   Harsh Bora
• [libvirt] [PATCH v2] Introduce <driver> under <filesystem> to support open-by-handle.   Harsh Prateek Bora
• [libvirt] [v2] storage: Do not use comma as seperator for lvs output   Osier Yang
• [libvirt] [RFC PATCH 0/5] Summary on QEMU I/O throttling support to libvirt   Lei Li
• [libvirt] [RFC PATCH 1/5] Add new API virDomainBlockIoThrottle   Lei Li
• [libvirt] [RFC PATCH 2/5] Add virDomainBlockIoThrottle support to the remote driver   Lei Li
• [libvirt] [RFC PATCH 3/5] Implement virDomainBlockIoThrottle for the qemu driver   Lei Li
• [libvirt] [RFC PATCH 4/5] Enable the virDomainBlockIoThrottle API in virsh   Lei Li
• [libvirt] [RFC PATCH 5/5] Enable virDomainBlockIoThrottle in the python API   Lei Li
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Guido Günther
• [libvirt] [PATCH] xen_xs: Guard against set but empty kernel argument   Guido Guenther
• [libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu   shaohef at linux.vnet.ibm.com
• [libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu   Sheldon
• [libvirt] [PATCH 1/2] snapshot: sort snapshot-list --tree   Eric Blake
• [libvirt] libvirt changes/certification questions   Udayan Bapat
• [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches   Daniel P. Berrange
• [libvirt] [PATCH 2/2] snapshot: avoid accidental renames with snapshot-edit   Eric Blake
• [libvirt] libvirt changes/certification questions   Eric Blake
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Eric Blake
• [libvirt] [PATCH] xen_xs: Guard against set but empty kernel argument   Eric Blake
• [libvirt] ALERT Virtualization Automatic Builder   berrange at redhat.com
• [libvirt] ALERT Virtualization Automatic Builder   Eric Blake
• [libvirt] [PATCH] dissectors: Create dissector for Libvirt RPC   Dave Allan
• [libvirt] [PATCH] maint: typo fixes   Eric Blake
• [libvirt] [PATCH 1/2] xen: add error handling to UUID parsing   Guido Günther
• [libvirt] [PATCH] xen_xs: Guard against set but empty kernel argument   Guido Günther
• [libvirt] [PATCH] snapshot: use correct qmp monitor command   Eric Blake
• [libvirt] [PATCH] libvirt-tck: add junit output   Guido Günther
• [libvirt] [PATCH 3/4] snapshot: take advantage of new relations   Eric Blake
• [libvirt] [PATCH 2/4] snapshot: track qemu snapshot relations   Eric Blake
• [libvirt] [PATCH 1/4] snapshot: framework for more efficient relation traversal   Eric Blake
• [libvirt] [PATCH] libvirt-tck: add junit output   Eric Blake
• [libvirt] [PATCH] docs: fix html bug   Eric Blake
• [libvirt] [PATCH v4 1/2] virDomainCoreDump: Introduce VIR_DUMP_RESET flag   Eric Blake
• [libvirt] [PATCH v4 2/2] qemu: Implement VIR_DUMP_RESET   Eric Blake
• [libvirt] [PATCHv2 1/7] snapshot: new virDomainSnapshotListChildrenNames API   Eric Blake
• [libvirt] [PATCHv2 2/7] snapshot: virsh snapshot-list and children   Eric Blake
• [libvirt] [PATCHv2 4/7] snapshot: virsh fallback for snapshot-list --from children   Eric Blake
• [libvirt] [PATCHv2 5/7] snapshot: virsh fallback for snapshot-list --descendants --from   Eric Blake
• [libvirt] [PATCHv2 7/7] snapshot: implement snapshot children listing in qemu   Eric Blake
• [libvirt] [PATCHv2 10/7] snapshot: implement snapshot children listing in esx   Eric Blake
• [libvirt] [PATCH 3/4] snapshot: take advantage of new relations   Daniel Veillard
• [libvirt] [PATCH 2/4] snapshot: track qemu snapshot relations   Daniel Veillard
• [libvirt] [PATCH 1/4] snapshot: framework for more efficient relation traversal   Daniel Veillard
• [libvirt] [PATCHv2 1/7] snapshot: new virDomainSnapshotListChildrenNames API   Daniel Veillard
• [libvirt] [PATCHv2 2/7] snapshot: virsh snapshot-list and children   Daniel Veillard
• [libvirt] [PATCHv2 7/7] snapshot: implement snapshot children listing in qemu   Daniel Veillard
• [libvirt] [PATCH] snapshot: use correct qmp monitor command   Daniel Veillard
• [libvirt] target for documentation   Jason Helfman
• [libvirt] [PATCH] dissectors: Create dissector for Libvirt RPC   Daniel P. Berrange
• [libvirt] ALERT Virtualization Automatic Builder   Daniel P. Berrange
• [libvirt] [PATCH] libvirt-tck: add junit output   Daniel P. Berrange
• [libvirt] target for documentation   Daniel P. Berrange
• [libvirt] [PATCH] qemu: Get the dev from activePciHostdevs list before reattachment   Osier Yang
• [libvirt] RPM build failure on Redhat6   Wayne Xia
• [libvirt] RPM build failure on Redhat6   Wen Congyang
• [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches   Christophe Fergeau
• [libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu   Xu, He Jie
• [libvirt] libvirt changes/certification questions   Matthias Bolte
• [libvirt] [PATCH v2] Introduce <driver> under <filesystem> to support open-by-handle.   Daniel P. Berrange
• [libvirt] [PATCH] Introduce <driver> under <filesystem> to support open-by-handle.   Daniel P. Berrange
• [libvirt] [PATCH] Fix handling of stream EOF   Daniel P. Berrange
• [libvirt] [PATCH] Fix storage pool source comparison to avoid comparing with self   Daniel P. Berrange
• [libvirt] [PATCH] dissectors: Create dissector for Libvirt RPC   Michal Privoznik
• [libvirt] [PATCH 4/5] buf: implement generic virBufferEscape   Daniel P. Berrange
• [libvirt] ALERT Virtualization Automatic Builder   berrange at redhat.com
• [libvirt] ALERT Virtualization Automatic Builder   Daniel P. Berrange
• [libvirt] [PATCH] daemon: Always advertise libvirtd service   Daniel P. Berrange
• [libvirt] [PATCH v3] Introduce <driver> under <filesystem> to support open-by-handle.   Harsh Prateek Bora
• [libvirt] [PATCH v3] Introduce <driver> under <filesystem> to support open-by-handle.   Daniel P. Berrange
• [libvirt] [PATCH] daemon: Always advertise libvirtd service   Osier Yang
• [libvirt] [PATCH] Fail gracefully when hashtables are NULL   Christophe Fergeau
• [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches   Christophe Fergeau
• [libvirt] [PATCH v5 2/2] qemu: Implement VIR_DUMP_RESET   Michal Privoznik
• [libvirt] [PATCH v2] daemon: Always advertise libvirtd service   Osier Yang
• [libvirt] [PATCH] libvirt-tck: add junit output   Guido Günther
• [libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu   Adam Litke
• [libvirt] [PATCH] libvirt-tck: Add testcase to test snapshot functionality.   Guido Günther
• [libvirt] [PATCH] libvirt-tck: add junit output   Daniel P. Berrange
• [libvirt] [PATCH] libvirt-tck: add junit output   Guido Günther
• [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches   Zeeshan Ali (Khattak)
• [libvirt] [PATCH] libvirt-tck: Add testcase to test snapshot functionality.   Eric Blake
• [libvirt] [PATCH] build: Fix VPATH build with new probes   Jiri Denemark
• [libvirt] [RFC PATCH 1/5] Add new API virDomainBlockIoThrottle   Adam Litke
• [libvirt] [libvirt-glib 00/24] libvirt-gconfig patches   Christophe Fergeau
• [libvirt] [PATCH] build: Fix VPATH build with new probes   Eric Blake
• [libvirt] [RFC PATCH 2/5] Add virDomainBlockIoThrottle support to the remote driver   Adam Litke
• [libvirt] [PATCH] Fix handling of stream EOF   Eric Blake
• [libvirt] [PATCH] Fix storage pool source comparison to avoid comparing with self   Eric Blake
• [libvirt] [RFC PATCH 3/5] Implement virDomainBlockIoThrottle for the qemu driver   Adam Litke
• [libvirt] [RFC PATCH 4/5] Enable the virDomainBlockIoThrottle API in virsh   Adam Litke
• [libvirt] [PATCH] disable xenlight for non-Xen platforms   Dan Horák
• [libvirt] ALERT Virtualization Automatic Builder   Eric Blake
• [libvirt] Polling for QEMU 1.0 test day   Paolo Bonzini
• [libvirt] [libvirt-glib] The input stream is owned by GVirStream, don't ref it   Marc-André Lureau
• [libvirt] [PATCH] build: Fix VPATH build with new probes   Eric Blake
• [libvirt] [libvirt-glib] The input stream is owned by GVirStream, don't ref it   Christophe Fergeau
• [libvirt] [PATCH] build: fix 'make check' linkage with dtrace   Eric Blake
• [libvirt] [PATCH] build: fix 'make check' linkage with dtrace   Jiri Denemark
• [libvirt] [PATCH] build: fix 'make check' linkage with dtrace   Eric Blake
• [libvirt] [PATCH] disable xenlight for non-Xen platforms   Eric Blake
• [libvirt] [PATCH] build: ship helper scripts   Eric Blake
• [libvirt] [PATCH] build: ship helper scripts   Eric Blake
• [libvirt] [PATCH] libvirt-tck: Add testcase to test snapshot functionality.   Guido Günther
• [libvirt] [PATCH] build: fix 'make distcheck'   Eric Blake
• [libvirt] [PATCH] build: fix 'make rpm'   Eric Blake
• [libvirt] [PATCH] events: Propose a separate lock for event queue   Eric Blake
• [libvirt] [PATCH] build: fix mingw build without sasl   Eric Blake
• [libvirt] [PATCH 14/7] snapshot: virsh shorthand for operating on current snap   Eric Blake
• [libvirt] [PATCH] snapshot: use correct qmp monitor command   Eric Blake
• [libvirt] [PATCH 1/4] snapshot: framework for more efficient relation traversal   Eric Blake
• [libvirt] Possible security hole? unprivileged user can use virsh to overwrite sensitive system file   Hong Xiang
• [libvirt] build: fail to 'make distcheck'   Wenyi Gao
• [libvirt] [PATCH v3 00/13] Implement keepalive protocol for libvirt RPC   Jiri Denemark
• [libvirt] [PATCH v3 01/13] Define keepalive protocol   Jiri Denemark
• [libvirt] [PATCH v3 02/13] Implement common keepalive handling   Jiri Denemark
• [libvirt] [PATCH v3 03/13] Introduce virConnectSetKeepAlive   Jiri Denemark
• [libvirt] [PATCH v3 04/13] virsh: Always run event loop   Jiri Denemark
• [libvirt] [PATCH v3 05/13] Implement keepalive protocol in libvirt daemon   Jiri Denemark
• [libvirt] [PATCH v3 06/13] Add support for non-blocking calls in client RPC   Jiri Denemark
• [libvirt] [PATCH v3 07/13] Add support for async close of client RPC socket   Jiri Denemark
• [libvirt] [PATCH v3 08/13] Implement keepalive protocol in remote driver   Jiri Denemark
• [libvirt] [PATCH v3 09/13] Introduce virConnectIsAlive API   Jiri Denemark
• [libvirt] [PATCH v3 10/13] Implement virConnectIsAlive in all drivers   Jiri Denemark
• [libvirt] [PATCH v3 11/13] Add keepalive support into domain-events examples   Jiri Denemark
• [libvirt] [PATCH v3 12/13] qemu: Add support for keepalive messages during p2p migration   Jiri Denemark
• [libvirt] [PATCH v3 13/13] qemu: Cancel p2p migration when connection breaks   Jiri Denemark
• [libvirt] build: fail to 'make distcheck'   Alex Jia
• [libvirt] build: fail to 'make distcheck'   Alex Jia
• [libvirt] Possible security hole? unprivileged user can use virsh to overwrite sensitive system file   Alex Jia
• [libvirt] build: fail to 'make distcheck'   Wenyi Gao
• [libvirt] [RFC PATCH 3/5] Implement virDomainBlockIoThrottle for the qemu driver   Zhi Yong Wu
• [libvirt] [RFC PATCH 1/5] Add new API virDomainBlockIoThrottle   Zhi Yong Wu
• [libvirt] [PATCH 1/4] tests: Add support for skipping tests   Philipp Hahn
• [libvirt] [PATCH 2/4] tests: Skip Xen-HVM tests for root on dom0   Philipp Hahn
• [libvirt] Possible security hole? unprivileged user can use virsh to overwrite sensitive system file   Daniel P. Berrange
• [libvirt] [PATCH 3/4] xen: fix PyGrub boot device order   Philipp Hahn
• [libvirt] [PATCH 4/4] xen: Return tap2 for tap2 disks   Philipp Hahn
• [libvirt] [PATCH 0/4] Xen fixes   Philipp Hahn
• [libvirt] [PATCH v4 0/2] add blkio.weight_device support   Hu Tao
• [libvirt] [PATCH v4 1/2] Add VIR_TYPED_PARAM_STRING   Hu Tao
• [libvirt] [PATCH v4 2/2] add interface for blkio.weight_device   Hu Tao
• [libvirt] [RFC PATCH 0/5] Summary on QEMU I/O throttling support to libvirt   Stefan Hajnoczi
• [libvirt] [PATCH] events: Propose a separate lock for event queue   Daniel P. Berrange
• [libvirt] [PATCH] Make saving domain XML more robust   lvroyce
• [libvirt] [PATCH v2] events: Propose a separate lock for event queue   Michal Privoznik
• [libvirt] [PATCH] qemu: Check for domain being active on successful job acquire   Michal Privoznik
• [libvirt] [PATCH v2] daemon: Always advertise libvirtd service   Daniel P. Berrange
• [libvirt] [PATCH v2] daemon: Always advertise libvirtd service   Osier Yang
• [libvirt] [RFC PATCH 3/5] Implement virDomainBlockIoThrottle for the qemu driver   Adam Litke
• [libvirt] [PATCH 00/10] Console coruption with two or more clients series   Peter Krempa
• [libvirt] [PATCH 01/10] fdstream: Emit stream abort callback even if poll() doesnt.   Peter Krempa
• [libvirt] [PATCH 02/10] virnetclientstream: Propagate stream error messages to callback   Peter Krempa
• [libvirt] [PATCH 03/10] daemon: Subscribe the stream event callback for error events.   Peter Krempa
• [libvirt] [PATCH 04/10] fdstream: Add internal function to check if a fdstream is open   Peter Krempa
• [libvirt] [PATCH 05/10] virsh: fix console stream error reporting   Peter Krempa
• [libvirt] [PATCH 06/10] Add flags for virDomainOpenConsole   Peter Krempa
• [libvirt] [PATCH 07/10] virsh: add support for VIR_DOMAIN_CONSOLE_FORCE flag   Peter Krempa
• [libvirt] [PATCH 08/10] qemu: Add ability to abort existing console while creating new one   Peter Krempa
• [libvirt] [PATCH 09/10] lxc: Add ability to abort existing console when creating a new one   Peter Krempa
• [libvirt] [PATCH 10/10] uml: Add ability to abort existing console when creating a new one   Peter Krempa
• [libvirt] [PATCH 1/3] snapshot: add API for filtering by leaves   Daniel Veillard
• [libvirt] [PATCH 2/3] snapshot: implement LIST_LEAVES flag in qemu   Daniel Veillard
• [libvirt] [PATCH 3/3] snapshot: implement LIST_LEAVES flag in esx   Daniel Veillard
• [libvirt] [PATCH 1/3] example: Fix argument handling   Philipp Hahn
• [libvirt] [PATCH 2/3] example: Redirect --help output to stdout/stderr   Philipp Hahn
• [libvirt] [PATCH 3/3] example: Support debug output and loop switch   Philipp Hahn
• [libvirt] [PATCH 0/3] example: event-test.py   Philipp Hahn
• [libvirt] [PATCH 0/5 v2] Improve Ceph Qemu+RBD support   Daniel P. Berrange
• [libvirt] [PATCH 1/5] secret: add Ceph secret type   Daniel P. Berrange
• [libvirt] [PATCH 2/5] storage: add authId, authDomain to virDomainDiskDef   Daniel P. Berrange
• [libvirt] [PATCH 3/5] qemu: pass virConnectPtr into Domain{Attach, Detach}*   Daniel P. Berrange
• [libvirt] [PATCH] qemu: Do not reattach PCI device used by other domain when shutdown   Eric Blake
• [libvirt] [PATCH 0/5 v2] Improve Ceph Qemu+RBD support   Sage Weil
• [libvirt] [PATCH 5/5] qemu/rbd: improve rbd device specification   Daniel P. Berrange
• [libvirt] [PATCH 4/5] buf: implement generic virBufferEscape   Eric Blake
• [libvirt] [PATCH] qemu: Get the dev from activePciHostdevs list before reattachment   Eric Blake
• [libvirt] [PATCH v3] Introduce <driver> under <filesystem> to support open-by-handle.   Eric Blake
• [libvirt] [PATCH v5 2/2] qemu: Implement VIR_DUMP_RESET   Eric Blake
• [libvirt] build: fail to 'make distcheck'   Eric Blake
• [libvirt] [PATCH 2/4] tests: Skip Xen-HVM tests for root on dom0   Eric Blake
• [libvirt] [PATCH 3/4] xen: fix PyGrub boot device order   Eric Blake
• [libvirt] [PATCH 1/4] tests: Add support for skipping tests   Eric Blake
• [libvirt] [PATCH] [libvirt-perl] Add missing $flags arguments to documentation   Guido Günther
• [libvirt] [libvirt PATCHv3 00/10] DHCP snooping support for libvirt   David L Stevens
• [libvirt] [libvirt PATCHv3 01/10] support continue/return   David L Stevens
• [libvirt] [libvirt PATCHv3 02/10] allow required ARP packets   David L Stevens
• [libvirt] [libvirt PATCHv3 03/10] reverse sense of address matching   David L Stevens
• [libvirt] [libvirt PATCHv3 04/10] make default chain policy "DROP"   David L Stevens
• [libvirt] [libvirt PATCHv3 05/10] allow chain modification   David L Stevens
• [libvirt] [libvirt PATCHv3 06/10] support addRules   David L Stevens
• [libvirt] [libvirt PATCHv3 07/10] support variable value changing   David L Stevens
• [libvirt] [libvirt PATCHv3 08/10] add DHCP snooping   David L Stevens
• [libvirt] [libvirt PATCHv3 09/10] add leasefile support   David L Stevens
• [libvirt] [libvirt PATCHv3 10/10] support multiple static IP addresses   David L Stevens
• [libvirt] [PATCH] [libvirt-perl] Add missing $flags arguments to documentation   Daniel P. Berrange
• [libvirt] [PATCH] [libvirt-perl] Add missing $flags arguments to documentation   Guido Günther
• [libvirt] [PATCH v2] events: Propose a separate lock for event queue   Daniel P. Berrange
• [libvirt] [PATCH v2 2/2] qemu: Implement migration optional disk   Daniel P. Berrange
• [libvirt] [PATCH v2 1/2] migration: Introduce <migration> element for cdrom and floppy   Daniel P. Berrange
• [libvirt] [libvirt PATCHv3 01/10] support continue/return   Stefan Berger
• [libvirt] [libvirt PATCHv3 00/10] DHCP snooping support for libvirt   Stefan Berger
• [libvirt] [libvirt PATCHv3 00/10] DHCP snooping support for libvirt   David Stevens
• [libvirt] [PATCH] qemu: Check for domain being active on successful job acquire   Eric Blake
• [libvirt] [RFC PATCH 1/5] Add new API virDomainBlockIoThrottle   Eric Blake
• [libvirt] [PATCH 4/4] xen: Return tap2 for tap2 disks   Eric Blake
• [libvirt] [PATCH 2/3] snapshot: implement LIST_LEAVES flag in qemu   Eric Blake
• [libvirt] [PATCH 1/3] example: Fix argument handling   Eric Blake
• [libvirt] [PATCH 2/3] example: Redirect --help output to stdout/stderr   Eric Blake
• [libvirt] [PATCH 3/3] example: Support debug output and loop switch   Eric Blake
• [libvirt] [PATCH 0/3] Detect netcat implementation   Guido Günther
• [libvirt] [PATCH 1/3] Autodetect if the remote nc command supports the -q option   Guido Günther
• [libvirt] [PATCH 2/3] Add virBufferEscapeShell   Guido Günther
• [libvirt] [PATCH 3/3] Use virBufferEscapeShell in virNetSocketNewConnectSSH   Guido Günther
• [libvirt] [PATCH 1/3] Autodetect if the remote nc command supports the -q option   Eric Blake
• [libvirt] [PATCH 2/3] Add virBufferEscapeShell   Eric Blake
• [libvirt] [PATCH 3/3] Use virBufferEscapeShell in virNetSocketNewConnectSSH   Eric Blake
• [libvirt] [PATCH] build: add compiler attributes to virUUIDParse   Eric Blake
• [libvirt] [PATCH] build: update to latest gnulib   Eric Blake
• [libvirt] [PATCH RESEND] spec: mingw cleanups   Eric Blake
• [libvirt] [PATCH RESEND] command: avoid fd leak on failure   Eric Blake
• [libvirt] [PATCH] qemu: check for json allocation failure   Eric Blake
• [libvirt] [PATCH] qemu: avoid text monitor null deref   Eric Blake
• [libvirt] [PATCH] qemu: fix text block info parsing   Eric Blake
• [libvirt] [PATCH] qemu: Do not reattach PCI device used by other domain when shutdown   Osier Yang
• [libvirt] [PATCH] qemu: Get the dev from activePciHostdevs list before reattachment   Osier Yang
• [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt   Serge E. Hallyn
• [libvirt] [PATCH 2/2] Fix type in lxc_controller   Serge E. Hallyn
• [libvirt] [PATCH v2] qemu: Do not reattach PCI device used by other domain when shutdown   Osier Yang
• [libvirt] Possible security hole? unprivileged user can use virsh to overwrite sensitive system file   Hong Xiang
• [libvirt] [PATCH v2] qemu: Do not reattach PCI device used by other domain when shutdown   Osier Yang
• [libvirt] [PATCH 2/3] Add virBufferEscapeShell   Philipp Hahn
• [libvirt] [PATCH] support setting bandwidth from virsh attach-interface   Hu Tao
• [libvirt] [PATCH] build: fix 'make dist' error   Wen Congyang
• [libvirt] [PATCH v5 2/2] qemu: Implement VIR_DUMP_RESET   Michal Privoznik
• [libvirt] [PATCH] build: fix 'make dist' error   Daniel Veillard
• [libvirt] [PATCH] qemu: Get the dev from activePciHostdevs list before reattachment   Osier Yang
• [libvirt] [PATCH v2] events: Propose a separate lock for event queue   Michal Privoznik
• [libvirt] [PATCH] qemu: Check for domain being active on successful job acquire   Michal Privoznik
• [libvirt] RPM build failure on Redhat6   Wayne Xia
• [libvirt] [RFC PATCH 3/5] Implement virDomainBlockIoThrottle for the qemu driver   Zhi Yong Wu
• [libvirt] [PATCH v3] qemu: Honor the orginal PCI dev properties when reattaching   Osier Yang
• [libvirt] [PATCH v2] qemu: Honor the orginal PCI dev properties when reattaching   Osier Yang
• [libvirt] [PATCH] qemu: check for json allocation failure   Peter Krempa
• [libvirt] [PATCH] build: add compiler attributes to virUUIDParse   Daniel Veillard
• [libvirt] [PATCH] build: update to latest gnulib   Daniel Veillard
• [libvirt] [PATCH RESEND] spec: mingw cleanups   Daniel Veillard
• [libvirt] [RFC PATCH 1/5] Add new API virDomainBlockIoThrottle   Daniel P. Berrange
• [libvirt] [PATCH RESEND] command: avoid fd leak on failure   Daniel Veillard
• [libvirt] [PATCH 2/2] Fix type in lxc_controller   Daniel P. Berrange
• [libvirt] [PATCH] qemu: avoid text monitor null deref   Daniel Veillard
• [libvirt] [PATCH] qemu: fix text block info parsing   Daniel Veillard
• [libvirt] [PATCH] support setting bandwidth from virsh attach-interface   Hong Xiang
• [libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu   Daniel P. Berrange
• [libvirt] [libvirt-glib] Don't leak virStreams, take the reference   Marc-André Lureau
• [libvirt] [libvirt-glib] Don't leak virStreams, take the reference   Daniel P. Berrange
• [libvirt] [PATCH] Allow for URI aliases when connecting to libvirt   Daniel P. Berrange
• [libvirt] [PATCH] [libvirt-tck] Allow to pass --timer to prove   Guido Günther
• [libvirt] [PATCH] [libvirt-tck] Allow to pass --timer to prove   Daniel P. Berrange
• [libvirt] ALERT Virtualization Automatic Builder   berrange at redhat.com
• [libvirt] [test-API][PATCH 0/5] Update migrate module   Wayne Sun
• [libvirt] [test-API][PATCH 1/5] Remove remote_guest_define function in migrate   Wayne Sun
• [libvirt] [test-API][PATCH 2/5] Add new variable static_uuid into env.cfg   Wayne Sun
• [libvirt] [test-API][PATCH 3/5] Update add_option_value function in parser   Wayne Sun
• [libvirt] [test-API][PATCH 4/5] Add new element uuid in xmlgenerator   Wayne Sun
• [libvirt] [test-API][PATCH 5/5] Update the migration case conf file   Wayne Sun
• [libvirt] [PATCH] virFDStream: close also given errfd (fd leak)   Marc-André Lureau
• [libvirt] [RFC PATCH 2/2] Routines to parse <numa> ... </numa>   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/3] Guest NUMA topology support - v0   Daniel P. Berrange
• [libvirt] [PATCH] [libvirt-tck] Allow to pass --timer to prove   Guido Günther
• [libvirt] [test-API][PATCH 1/5] Remove remote_guest_define function in migrate   Guannan Ren
• [libvirt] [test-API][PATCH 2/5] Add new variable static_uuid into env.cfg   Guannan Ren
• [libvirt] [test-API][PATCH 3/5] Update add_option_value function in parser   Guannan Ren
• [libvirt] [test-API][PATCH 4/5] Add new element uuid in xmlgenerator   Guannan Ren
• [libvirt] [test-API][PATCH 5/5] Update the migration case conf file   Guannan Ren
• [libvirt] [RFC PATCH 0/4] powerpc : Libvirt for the PowerPC platform   Prerna Saxena
• [libvirt] [RFC PATCH 1/4] powerpc: Use Sysfs to gather host info   Prerna Saxena
• [libvirt] [RFC PATCH 2/4] powerpc: Add cpu driver for powerpc host   Prerna Saxena
• [libvirt] [RFC PATCH 3/4] powerpc: Add support for qemu-system-ppc64 in qemu capabilities   Prerna Saxena
• [libvirt] [RFC PATCH 4/4] powerpc: Remove incompatible command line options from qemu startup   Prerna Saxena
• [libvirt] [PATCH] qemu: Log debug messages when changing job   Jiri Denemark
• [libvirt] [PATCH] qemu: Make sure BeginJob is always followed by EndJob   Jiri Denemark
• [libvirt] [PATCH v2 1/2] migration: Introduce <migration> element for cdrom and floppy   Guido Günther
• [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/4] powerpc : Libvirt for the PowerPC platform   Jiri Denemark
• [libvirt] [RFC PATCH 1/5] Add new API virDomainBlockIoThrottle   Adam Litke
• [libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu   Adam Litke
• [libvirt] [PATCH] qemu: Make sure BeginJob is always followed by EndJob   Michal Privoznik
• [libvirt] [PATCH] util: Make getaddrinfo failure nonfatal in virGetHostname   Jiri Denemark
• [libvirt] [PATCH] qemu: Log debug messages when changing job   Michal Privoznik
• [libvirt] [PATCH] util: Make getaddrinfo failure nonfatal in virGetHostname   Eric Blake
• [libvirt] [PATCH] build: update to latest gnulib   Eric Blake
• [libvirt] [PATCH] Allow for URI aliases when connecting to libvirt   Eric Blake
• [libvirt] [PATCH RESEND] spec: mingw cleanups   Eric Blake
• [libvirt] ALERT Virtualization Automatic Builder   Eric Blake
• [libvirt] [PATCH 2/2] Fix type in lxc_controller   Eric Blake
• [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt   Eric Blake
• [libvirt] ALERT Virtualization Automatic Builder   Daniel P. Berrange
• [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt   Eric Blake
• [libvirt] [PATCH RESEND] command: avoid fd leak on failure   Eric Blake
• [libvirt] [PATCH] virFDStream: close also given errfd (fd leak)   Eric Blake
• [libvirt] [PATCH] build: add compiler attributes to virUUIDParse   Eric Blake
• [libvirt] [PATCH] qemu: check for json allocation failure   Eric Blake
• [libvirt] [PATCH] qemu: avoid text monitor null deref   Eric Blake
• [libvirt] [PATCH] qemu: fix text block info parsing   Eric Blake
• [libvirt] How to identify a VirtFS using libvirt   Richard Maciel
• [libvirt] [PATCH 1/3] Autodetect if the remote nc command supports the -q option   Guido Günther
• [libvirt] [PATCH 2/3] Add virBufferEscapeShell   Guido Günther
• [libvirt] [PATCH 3/3] Use virBufferEscapeShell in virNetSocketNewConnectSSH   Guido Günther
• [libvirt] [PATCH 4/4] Use virBufferEscapeShell in cmdEcho   Guido Günther
• [libvirt] [PATCH] storage: plug memory leak on error   Eric Blake
• [libvirt] [PATCH 1/3] Autodetect if the remote nc command supports the -q option   Eric Blake
• [libvirt] [PATCH 2/3] Add virBufferEscapeShell   Eric Blake
• [libvirt] [PATCH 3/3] Use virBufferEscapeShell in virNetSocketNewConnectSSH   Eric Blake
• [libvirt] [PATCH 4/4] Use virBufferEscapeShell in cmdEcho   Guido Günther
• [libvirt] [PATCH 2/3] Add virBufferEscapeShell   Guido Günther
• [libvirt] [PATCH] esx: drop dead code to silence Coverity   Eric Blake
• [libvirt] [PATCH] conf: plug memory leak on error   Eric Blake
• [libvirt] [PATCH] qemu: plug memory leak on migration   Eric Blake
• [libvirt] [PATCH] macvtap: plug memory leak for 802.1Qbh   Eric Blake
• [libvirt] [PATCH] build: add compiler attributes to virUUIDParse   Daniel Veillard
• [libvirt] [PATCH] support setting bandwidth from virsh attach-interface   Hu Tao
• [libvirt] [PATCH] support setting bandwidth from virsh attach-interface   Hong Xiang
• [libvirt] [PATCH v4 2/2] add interface for blkio.weight_device   Lei Li
• [libvirt] [PATCH v2] support setting bandwidth from virsh attach-interface(was Re: [PATCH] support setting bandwidth from virsh attach-interface)   Hu Tao
• [libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu   shu ming
• [libvirt] [PATCH v2] support setting bandwidth from virsh attach-interface(was Re: [PATCH] support setting bandwidth from virsh attach-interface)   Hong Xiang
• [libvirt] [RFC PATCH 2/2] Routines to parse <numa> ... </numa>   Bharata B Rao
• [libvirt] [RFC PATCH 0/3] Guest NUMA topology support - v0   Bharata B Rao
• [libvirt] [PATCH] esx: drop dead code to silence Coverity   Michal Privoznik
• [libvirt] [RFC PATCH 0/4] powerpc : Libvirt for the PowerPC platform   Prerna Saxena
• [libvirt] [PATCH] build: add compiler attributes to virUUIDParse   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/4] powerpc : Libvirt for the PowerPC platform   Daniel P. Berrange
• [libvirt] [PATCH] Fix syntax problem in mingw32-libvirt.spec.in   Daniel P. Berrange
• [libvirt] [PATCH] esx: drop dead code to silence Coverity   Matthias Bolte
• [libvirt] [PATCH] [libvirt-tck] vol->as_xml: fix backing store element   Guido Günther
• [libvirt] [PATCH] [libvirt-tck] vol->as_xml: fix backing store element   Daniel P. Berrange
• [libvirt] [PATCH] [libvirt-tck] vol->as_xml: fix backing store element   Guido Günther
• [libvirt] (no subject)   Wayne Sun
• [libvirt] [test-API][PATCH 1/2] Update define module with remote define   Wayne Sun
• [libvirt] [test-API][PATCH 2/2] Add optional argument uuid in create and install module   Wayne Sun
• [libvirt] (no subject)   Guannan Sun
• [libvirt] [PATCH v2 1/2] Xen: move versions to struct   Philipp Hahn
• [libvirt] [PATCH v2] support setting bandwidth from virsh attach-interface(was Re: [PATCH] support setting bandwidth from virsh attach-interface)   Michal Privoznik
• [libvirt] [PATCH v2 2/2] Xen: Fake versions in xencapstest   Philipp Hahn
• [libvirt] [PATCH] virNetSocketNewConnectSSH: Escape netcat path too   Guido Günther
• [libvirt] [libvirt PATCHv3 00/10] DHCP snooping support for libvirt   Stefan Berger
• [libvirt] [PATCH 1/2] Fix occasional container creation failure due to misuse of grantpt   Serge E. Hallyn
• [libvirt] [RFC PATCH v2 0/2] API to invoke S3/S4 on a host and also resume from within libvirt   Srivatsa S. Bhat
• [libvirt] [RFC PATCH v2 1/2] Implement the asynchronous suspend and RTC wakeup   Srivatsa S. Bhat
• [libvirt] [RFC PATCH v2 2/2] Make the API public   Srivatsa S. Bhat
• [libvirt] [PATCH v2 0/2] Xen: skip xenHypervisor version init in tests   Philipp Hahn
• [libvirt] [PATCH] virNetSocketNewConnectSSH: Escape netcat path too   Eric Blake
• [libvirt] [PATCH] esx: drop dead code to silence Coverity   Eric Blake
• [libvirt] [PATCH v2 1/2] Xen: move versions to struct   Eric Blake
• [libvirt] [PATCH v2 2/2] Xen: Fake versions in xencapstest   Eric Blake
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt   Serge Hallyn
• [libvirt] [PATCH] qemu: Log debug messages when changing job   Jiri Denemark
• [libvirt] [PATCH] qemu: Make sure BeginJob is always followed by EndJob   Jiri Denemark
• [libvirt] [PATCH] util: Make getaddrinfo failure nonfatal in virGetHostname   Jiri Denemark
• [libvirt] [PATCH] docs: fix network XML documentation   Laine Stump
• [libvirt] [PATCH v2] qemu: Do not reattach PCI device used by other domain when shutdown   Eric Blake
• [libvirt] [PATCH] Clarify semantics of virDomainMigrate2   Jiri Denemark
• [libvirt] [PATCH] docs: fix network XML documentation   Eric Blake
• [libvirt] [PATCH] Clarify semantics of virDomainMigrate2   Eric Blake
• [libvirt] [PATCH] Clarify semantics of virDomainMigrate2   Jiri Denemark
• [libvirt] [PATCH] macvtap: plug memory leak for 802.1Qbh   Roopa Prabhu
• [libvirt] [PATCH] macvtap: plug memory leak for 802.1Qbh   Eric Blake
• [libvirt] [PATCH] macvtap: plug memory leak for 802.1Qbh   Roopa Prabhu
• [libvirt] [PATCH] macvtap: plug memory leak for 802.1Qbh   Eric Blake
• [libvirt] [PATCH v3] qemu: Honor the orginal PCI dev properties when reattaching   Eric Blake
• [libvirt] [PATCH] Bug Fix: Fix getPhysfnDev to always allocate memory for physfndev on success   Eric Blake
• [libvirt] [PATCH] macvtap: plug memory leak for 802.1Qbh   Roopa Prabhu
• [libvirt] New repositories and comments for Code Search   Richard W.M. Jones
• [libvirt] [PATCH] Add missing strdup return value check   Roopa Prabhu
• [libvirt] [PATCH] docs: document managed=yes of hostdev passthrough   Eric Blake
• [libvirt] [PATCH] Add missing strdup return value check   Eric Blake
• [libvirt] [PATCH] add a default event handle, to passthough the new events come from qemu   Eric Blake
• [libvirt] [RFC PATCH 2/2] Routines to parse <numa> ... </numa>   Eric Blake
• [libvirt] [PATCH] Add missing strdup return value check   Roopa Prabhu
• [libvirt] [PATCH v3] qemu: Honor the orginal PCI dev properties when reattaching   Osier Yang
• [libvirt] [PATCH v3] qemu: Honor the orginal PCI dev properties when reattaching   Osier Yang
• [libvirt] [libvirt PATCHv3 08/10] add DHCP snooping   Stefan Berger
• [libvirt] [PATCH] build: fix 'make dist' error   Wen Congyang
• [libvirt] [PATCH 3/3] snapshot: implement LIST_LEAVES flag in esx   Matthias Bolte
• [libvirt] [PATCH v2] qemu: Do not reattach PCI device used by other domain when shutdown   Osier Yang
• [libvirt] [PATCH] docs: document managed=yes of hostdev passthrough   Osier Yang
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt   Eli Qiao
• [libvirt] [PATCH] qemu: Relax -no-shutdown check to [0.14.0, 0.15.0]   Jiri Denemark
• [libvirt] [PATCH] Add support for autodestroy of guests to the LXC and UML drivers   Daniel P. Berrange
• [libvirt] [PATCH] qemu: Relax -no-shutdown check to [0.14.0, 0.15.0]   Michal Privoznik
• [libvirt] [PATCH v2] qemu: Do not reattach PCI device used by other domain when shutdown   Osier Yang
• [libvirt] [PATCH] qemu: Do not wait if the PCI device is not managed when reattaching   Osier Yang
• [libvirt] [PATCH] qemu: Honor the original properties of PCI device when detaching   Osier Yang
• [libvirt] [PATCHv2 01/13] virbuf: fix const-correctness   Hai Dong Li
• [libvirt] [libvirt-glib] Use gvir-stream as GVirStream quark name   Christophe Fergeau
• [libvirt] [libvirt-glib] Remove vir- prefix from signals   Christophe Fergeau
• [libvirt] [libvirt-glib] Remove vir- prefix from signals   Daniel P. Berrange
• [libvirt] [libvirt-glib] Use gvir-stream as GVirStream quark name   Daniel P. Berrange
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt   Serge E. Hallyn
• [libvirt] [BUG, RFC] Python generator: missing error_codes in generated libvirError exceptions   Philipp Hahn
• [libvirt] [PATCH 00/10] Console coruption with two or more clients series   Peter Krempa
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt   Eric Blake
• [libvirt] [PATCHv2 01/13] virbuf: fix const-correctness   Eric Blake
• [libvirt] [PATCH V1 0/6] Make part of inner workings of nwfilters more flexible   Stefan Berger
• [libvirt] [PATCH V1 1/6] Extend virHashTable with function to get hash tables keys   Stefan Berger
• [libvirt] [PATCH V1 2/6] Introduce an internal priority for chains   Stefan Berger
• [libvirt] [PATCH V1 3/6] Make filter creation in root table more flexible   Stefan Berger
• [libvirt] [PATCH V1 4/6] Use scripting for cleaning and renaming of chains   Stefan Berger
• [libvirt] [PATCH V1 5/6] Use actual name of a chain in data structure   Stefan Berger
• [libvirt] [PATCH V1 6/6] Example of adding a new filter called arpmac.   Stefan Berger
• [libvirt] [PATCH] Fix two comments related to error handling   Philipp Hahn
• [libvirt] [PATCH] Fix two comments related to error handling   Peter Krempa
• [libvirt] Compiler warnings   Alex Jia
• [libvirt] Compiler warnings   Eric Blake
• [libvirt] [libvirt PATCHv3 03/10] reverse sense of address matching   Stefan Berger
• [libvirt] [libvirt PATCHv3 04/10] make default chain policy "DROP"   Stefan Berger
• [libvirt] Compiler warnings   Alex Jia
• [libvirt] [PATCH] Fix VPATH build   Jiri Denemark
• [libvirt] [PATCH] Fix VPATH build   Eric Blake
• [libvirt] [libvirt PATCHv3 05/10] allow chain modification   Stefan Berger
• [libvirt] [PATCH] qemu: avoid dereferencing a NULL pointer   ajia at redhat.com
• [libvirt] Compiler warnings   Eric Blake
• [libvirt] [PATCH] qemu: avoid dereferencing a NULL pointer   Eric Blake
• [libvirt] [libvirt PATCHv3 07/10] support variable value changing   Stefan Berger
• [libvirt] Compiler warnings   Alex Jia
• [libvirt] [PATCH] Fix virt-sanlock-cleanup documentation   Philipp Hahn
• [libvirt] [PATCH] qemu: avoid dereferencing a NULL pointer   Alex Jia
• [libvirt] [libvirt PATCHv3 09/10] add leasefile support   Stefan Berger
• [libvirt] Compiler warnings   Eric Blake
• [libvirt] Compiler warnings   Eric Blake
• [libvirt] [libvirt PATCHv3 04/10] make default chain policy "DROP"   David Stevens
• [libvirt] [PATCH] Fix virt-sanlock-cleanup documentation   Eric Blake
• [libvirt] [libvirt PATCHv3 05/10] allow chain modification   David Stevens
• [libvirt] [libvirt PATCHv3 04/10] make default chain policy "DROP"   Stefan Berger
• [libvirt] [libvirt PATCHv3 05/10] allow chain modification   Stefan Berger
• [libvirt] [libvirt PATCHv3 07/10] support variable value changing   David Stevens
• [libvirt] [PATCH v2] qemu: Do not reattach PCI device used by other domain when shutdown   Eric Blake
• [libvirt] [PATCH] qemu: Do not wait if the PCI device is not managed when reattaching   Eric Blake
• [libvirt] [PATCH 3/3] snapshot: implement LIST_LEAVES flag in esx   Eric Blake
• [libvirt] [libvirt PATCHv3 05/10] allow chain modification   David Stevens
• [libvirt] [PATCH] Add support for autodestroy of guests to the LXC and UML drivers   Eric Blake
• [libvirt] [PATCH] qemu: Honor the original properties of PCI device when detaching   Eric Blake
• [libvirt] [libvirt PATCHv3 05/10] allow chain modification   Stefan Berger
• [libvirt] [libvirt PATCHv3 08/10] add DHCP snooping   Stefan Berger
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Serge E. Hallyn
• [libvirt] [PATCH] Add AHCI support to qemu driver   Jim Fehlig
• [libvirt] [PATCH] Add AHCI support to qemu driver   Eric Blake
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Eric Blake
• [libvirt] [libvirt PATCHv3 04/10] make default chain policy "DROP"   David Stevens
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Serge E. Hallyn
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Eric Blake
• [libvirt] [PATCH] Add AHCI support to qemu driver   Jim Fehlig
• [libvirt] [libvirt PATCHv3 04/10] make default chain policy "DROP"   Stefan Berger
• [libvirt] [libvirt PATCHv3 10/10] support multiple static IP addresses   Stefan Berger
• [libvirt] [PATCH] qemu: Do not wait if the PCI device is not managed when reattaching   Osier Yang
• [libvirt] Compiler warnings   Wen Congyang
• [libvirt] [PATCHv2 01/13] virbuf: fix const-correctness   Hai Dong Li
• [libvirt] Compiler warnings   Wen Congyang
• [libvirt] Compiler warnings   Wen Congyang
• [libvirt] Compiler warnings   Alex Jia
• [libvirt] [PATCH] compile: Add a missing function 'pciDeviceListFind' to libvirt_private.syms   Xu He Jie
• [libvirt] [PATCHv2 02/13] virbuf: improve testsuite reporting   Hai Dong Li
• [libvirt] [PATCH] compile: Add a missing function 'pciDeviceListFind' to libvirt_private.syms   Wen Congyang
• [libvirt] [PATCH] compile: Add a missing function 'pciDeviceListFind' to libvirt_private.syms   Xu He Jie
• [libvirt] [PATCH v2] qemu: Honor the original properties of PCI device when detaching   Osier Yang
• [libvirt] [PATCHv2 03/13] virbuf: more detailed error reporting   Hai Dong Li
• [libvirt] [PATCH] virBufferEscapeShell: Fix escaping of single quotes.   Guido Günther
• [libvirt] [PATCH v2] support setting bandwidth from virsh attach-interface(was Re: [PATCH] support setting bandwidth from virsh attach-interface)   Hu Tao
• [libvirt] [PATCH v3] support setting bandwidth from virsh attach-interface   Hu Tao
• [libvirt] [PATCH] compile: fix undefined reference to gnutls_x509_crt_get_dn with gcc-4.6.1   Xu He Jie
• [libvirt] [PATCH] Fix VPATH build   Jiri Denemark
• [libvirt] [PATCH] qemu: Relax -no-shutdown check to [0.14.0, 0.15.0]   Jiri Denemark
• [libvirt] [PATCH v3 01/13] Define keepalive protocol   Daniel P. Berrange
• [libvirt] [RFC] Use libssh2 for ssh transport instead of forking ssh process.   Peter Krempa
• [libvirt] [PATCH v3 02/13] Implement common keepalive handling   Daniel P. Berrange
• [libvirt] [PATCH] pci address conflict when virtio disk with drive type address   Xu He Jie
• [libvirt] [PATCH v3 03/13] Introduce virConnectSetKeepAlive   Daniel P. Berrange
• [libvirt] [PATCH v3 04/13] virsh: Always run event loop   Daniel P. Berrange
• [libvirt] [PATCH v3 05/13] Implement keepalive protocol in libvirt daemon   Daniel P. Berrange
• [libvirt] [PATCH v3 08/13] Implement keepalive protocol in remote driver   Daniel P. Berrange
• [libvirt] [PATCH v3 09/13] Introduce virConnectIsAlive API   Daniel P. Berrange
• [libvirt] [PATCH v3 10/13] Implement virConnectIsAlive in all drivers   Daniel P. Berrange
• [libvirt] [PATCH v3 11/13] Add keepalive support into domain-events examples   Daniel P. Berrange
• [libvirt] [PATCH v3 12/13] qemu: Add support for keepalive messages during p2p migration   Daniel P. Berrange
• [libvirt] [PATCH v3 13/13] qemu: Cancel p2p migration when connection breaks   Daniel P. Berrange
• [libvirt] [PATCH v3 07/13] Add support for async close of client RPC socket   Daniel P. Berrange
• [libvirt] [PATCH v3 06/13] Add support for non-blocking calls in client RPC   Daniel P. Berrange
• [libvirt] [PATCH 03/10] daemon: Subscribe the stream event callback for error events.   Daniel P. Berrange
• [libvirt] [PATCHv2 04/13] virbuf: add auto-indentation support   Hai Dong Li
• [libvirt] [PATCH 05/10] virsh: fix console stream error reporting   Daniel P. Berrange
• [libvirt] [PATCH 08/10] qemu: Add ability to abort existing console while creating new one   Daniel P. Berrange
• [libvirt] [PATCH 02/10] virnetclientstream: Propagate stream error messages to callback   Daniel P. Berrange
• [libvirt] [PATCH 01/10] fdstream: Emit stream abort callback even if poll() doesnt.   Daniel P. Berrange
• [libvirt] [PATCH 00/10] Console coruption with two or more clients series   Daniel P. Berrange
• [libvirt] [libvirt-glib 01/23] Add helpers in libvirt-gconfig-helpers.[ch]   Daniel P. Berrange
• [libvirt] [libvirt-glib 02/23] gvir_config_object_parse: don't parse empty documents   Daniel P. Berrange
• [libvirt] [PATCHv2 04/13] virbuf: add auto-indentation support   Hai Dong Li
• [libvirt] [libvirt-glib 03/23] Add getters for GVirConfig xmlNode and xmlDoc   Daniel P. Berrange
• [libvirt] [libvirt-glib 04/23] Add GVirConfigObject::node property   Daniel P. Berrange
• [libvirt] [libvirt-glib 05/23] Add GVir::Config::Domain::name property   Daniel P. Berrange
• [libvirt] [libvirt-glib 06/23] Rename gvir_config_domain_new   Daniel P. Berrange
• [libvirt] [libvirt-glib 07/23] Add gvir_config_domain_new to create an empty domain   Daniel P. Berrange
• [libvirt] [libvirt-glib 08/23] Implement gvir_config_domain_set_name   Daniel P. Berrange
• [libvirt] [libvirt-glib 09/23] Make the GVirConfigDomain::name property writable   Daniel P. Berrange
• [libvirt] [libvirt-glib 10/23] Add gvir_config_object_to_xml   Daniel P. Berrange
• [libvirt] [libvirt-glib 11/23] Use gvir_config_object_to_xml   Daniel P. Berrange
• [libvirt] [libvirt-glib 12/23] Add domain creation/parsing test   Daniel P. Berrange
• [libvirt] [libvirt-glib 13/23] Remove GVirConfigObject::docHandle   Daniel P. Berrange
• [libvirt] [libvirt-glib 14/23] Remove xml parsing from gvir_config_*_new functions   Daniel P. Berrange
• [libvirt] [libvirt-glib 15/23] Only do XML parsing when creating config objects   Daniel P. Berrange
• [libvirt] [libvirt-glib 16/23] Remove GError argument from GVirConfigObject::node getter   Daniel P. Berrange
• [libvirt] [libvirt-glib 17/23] Remove GVirConfigObject::doc   Daniel P. Berrange
• [libvirt] [libvirt-glib 18/23] Add gvir_config_object_get_node_content   Daniel P. Berrange
• [libvirt] [libvirt-glib 19/23] Add gvir_config_object_set_node_content   Daniel P. Berrange
• [libvirt] [libvirt-glib 20/23] Add test-domain-duplicate.xml which currently fails   Daniel P. Berrange
• [libvirt] [libvirt-glib 22/23] Add GVirConfigDomain::memory   Daniel P. Berrange
• [libvirt] [libvirt-glib 23/23] Add GVirConfigDomain::features   Daniel P. Berrange
• [libvirt] [PATCH 00/10] Console coruption with two or more clients series   Peter Krempa
• [libvirt] [PATCH 08/10] qemu: Add ability to abort existing console while creating new one   Peter Krempa
• [libvirt] [libvirt-glib 13/23] Remove GVirConfigObject::docHandle   Christophe Fergeau
• [libvirt] [libvirt-glib 02/23] gvir_config_object_parse: don't parse empty documents   Christophe Fergeau
• [libvirt] [libvirt-glib 04/23] Add GVirConfigObject::node property   Christophe Fergeau
• [libvirt] [libvirt-glib 08/23] Implement gvir_config_domain_set_name   Christophe Fergeau
• [libvirt] [PATCH] Add AHCI support to qemu driver   Adam Litke
• [libvirt] [libvirt-glib 20/23] Add test-domain-duplicate.xml which currently fails   Christophe Fergeau
• [libvirt] [libvirt-glib 04/23] Add GVirConfigObject::node property   Daniel P. Berrange
• [libvirt] Compiler warnings   Wen Congyang
• [libvirt] Compiler warnings   Wen Congyang
• [libvirt] [PATCH] compile: Add a missing function 'pciDeviceListFind' to libvirt_private.syms   Wen Congyang
• [libvirt] Compiler warnings   Eric Blake
• [libvirt] [PATCH] virBufferEscapeShell: Fix escaping of single quotes.   Eric Blake
• [libvirt] [PATCH] compile: fix undefined reference to gnutls_x509_crt_get_dn with gcc-4.6.1   Eric Blake
• [libvirt] [PATCH] pci address conflict when virtio disk with drive type address   Eric Blake
• [libvirt] [PATCH] documentation: trivial spelling fix   Philipp Hahn
• [libvirt] [RFC] Use libssh2 for ssh transport instead of forking ssh process.   Matthias Witte
• [libvirt] [PATCH] virBufferEscapeShell: Fix escaping of single quotes.   Guido Günther
• [libvirt] [RFC] Use libssh2 for ssh transport instead of forking ssh process.   Daniel P. Berrange
• [libvirt] [PATCH] Add AHCI support to qemu driver   Adam Litke
• [libvirt] [PATCH] Allow for URI aliases when connecting to libvirt   Daniel P. Berrange
• [libvirt] [PATCH 1/2] qemu: Fix name-space handling   Philipp Hahn
• [libvirt] [PATCH v3 10/13] Implement virConnectIsAlive in all drivers   Matthias Bolte
• [libvirt] [PATCH v3 10/13] Implement virConnectIsAlive in all drivers   Matthias Bolte
• [libvirt] [PATCH libvirt-snmp 0/3] fix problems found by coverity   Laine Stump
• [libvirt] [PATCH libvirt-snmp 1/3] allocate enough space for trailing NULL in string   Laine Stump
• [libvirt] [PATCH libvirt-snmp 2/3] eliminate bogus check for "NULL" array   Laine Stump
• [libvirt] [PATCH libvirt-snmp 3/3] fix startup logic for selecting stderr vs syslog   Laine Stump
• [libvirt] [PATCH libvirt-snmp 0/3] fix problems found by coverity   Eric Blake
• [libvirt] [PATCH 2/2] qemu: Test name-space handling   Philipp Hahn
• [libvirt] [PATCH 0/3] Consolidate shell escape functions   Guido Günther
• [libvirt] [PATCH 1/3] virBufferEscapeShell: Emit quotes for the empty string   Guido Günther
• [libvirt] [PATCH 2/3] Use virBufferEscapeShell in cmdEcho   Guido Günther
• [libvirt] [PATCH 3/3] qemu: replace qemuMonitorEscapeShell by virBufferEscapeShell   Guido Günther
• [libvirt] [PATCH] virNetSocketNewConnectSSH: Escape netcat path too   Guido Günther
• [libvirt] [libvirt PATCH] support continue/return targets in nwfilter   David L Stevens
• [libvirt] [PATCH 1/3] virBufferEscapeShell: Emit quotes for the empty string   Eric Blake
• [libvirt] [PATCH 2/3] Use virBufferEscapeShell in cmdEcho   Eric Blake
• [libvirt] [PATCH 3/3] qemu: replace qemuMonitorEscapeShell by virBufferEscapeShell   Eric Blake
• [libvirt] [PATCH] snapshot: detect when qemu lacks disk-snapshot support   Eric Blake
• [libvirt] [PATCH] snapshot: detect when qemu lacks disk-snapshot support   Eric Blake
• [libvirt] [PATCHv2] snapshot: detect when qemu lacks disk-snapshot support   Eric Blake
• [libvirt] [PATCHv2] snapshot: detect when qemu lacks disk-snapshot support   Dave Allan
• [libvirt] [PATCHv2] snapshot: detect when qemu lacks disk-snapshot support   Eric Blake
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Serge E. Hallyn
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Serge E. Hallyn
• [libvirt] [PATCH] compile: fix undefined reference to gnutls_x509_crt_get_dn with gcc-4.6.1   Xu He Jie
• [libvirt] [PATCH] pci address conflict when virtio disk with drive type address   Xu He Jie
• [libvirt] [PATCH] documentation: trivial spelling fix   Wenyi Gao
• [libvirt] [PATCH 1/3] virBufferEscapeShell: Emit quotes for the empty string   Guido Günther
• [libvirt] [PATCH 1/2] qemu: Fix name-space handling   Daniel P. Berrange
• [libvirt] [PATCH 2/2] qemu: Test name-space handling   Daniel P. Berrange
• [libvirt] [libvirt PATCH] support continue/return targets in nwfilter   Daniel P. Berrange
• [libvirt] [PATCH] documentation: trivial spelling fix   Peter Krempa
• [libvirt] [PATCH] Replace virBufferAdd with virBufferAddLit for const string   Daniel P. Berrange
• [libvirt] [PATCH] snapshot: use correct qmp monitor command   lvroyce
• [libvirt] [PATCH] compile: fix undefined reference to gnutls_x509_crt_get_dn with gcc-4.6.1   ShaoHe Feng
• [libvirt] [PATCHv2 01/13] virbuf: fix const-correctness   Peter Krempa
• [libvirt] [PATCHv2 02/13] virbuf: improve testsuite reporting   Peter Krempa
• [libvirt] [PATCHv2 03/13] virbuf: more detailed error reporting   Peter Krempa
• [libvirt] [PATCH] qemu: Do not free the device from activePciHostdevs if it's in use   Osier Yang
• [libvirt] [PATCH] snapshot: use correct qmp monitor command   Eric Blake
• [libvirt] [PATCH] compile: fix undefined reference to gnutls_x509_crt_get_dn with gcc-4.6.1   Eric Blake
• [libvirt] [PATCH] qemu: Do not free the device from activePciHostdevs if it's in use   Osier Yang
• [libvirt] [PATCH] pci address conflict when virtio disk with drive type address   Eric Blake
• [libvirt] [PATCH 1/2] qemu: Fix name-space handling   Eric Blake
• [libvirt] [PATCH 2/2] qemu: Test name-space handling   Eric Blake
• [libvirt] [PATCH v3 0/4] Allow to make disk optional on migration   Michal Privoznik
• [libvirt] [PATCH v3 1/4] conf: Introduce optional on_missing attribute for cdrom and floppy   Michal Privoznik
• [libvirt] [PATCH v3 2/4] util: Create virFileAccessibleAs function   Michal Privoznik
• [libvirt] [PATCH v3 3/4] qemu: implement on_missing   Michal Privoznik
• [libvirt] [PATCH v3 4/4] on_missing: Emit event on disk source dropping   Michal Privoznik
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   Stefan Berger
• [libvirt] [PATCH V2 01/10] Extend virHashTable with function to get hash tables keys   Stefan Berger
• [libvirt] [PATCH V2 02/10] Introduce an internal priority for chains   Stefan Berger
• [libvirt] [PATCH V2 03/10] Make filter creation in root table more flexible   Stefan Berger
• [libvirt] [PATCH V2 04/10] Use scripting for cleaning and renaming of chains   Stefan Berger
• [libvirt] [PATCH V2 05/10] Use the actual names of chains in data structure   Stefan Berger
• [libvirt] [PATCH V2 06/10] Extend the filter XML to support priorities of chains   Stefan Berger
• [libvirt] [PATCH V2 07/10] Enable chains with names having a known prefix   Stefan Berger
• [libvirt] [PATCH V2 08/10] Extend rule priorities into negative numbers   Stefan Berger
• [libvirt] [PATCH V2 09/10] Interleave jumping into chains with filtering rules in root table   Stefan Berger
• [libvirt] [PATCH V2 10/10] Add test cases   Stefan Berger
• [libvirt] [PATCH 0/4] Make rewriting XML files more robust   Jiri Denemark
• [libvirt] [PATCH 1/4] Introduce virFileSync   Jiri Denemark
• [libvirt] [PATCH 2/4] Introduce virFileRewrite for safe file rewrite   Jiri Denemark
• [libvirt] [PATCH 3/4] Introduce virXMLSaveFile as a wrapper for virFileRewrite   Jiri Denemark
• [libvirt] [PATCH 4/4] Use virXMLSaveFile when writing XML config   Jiri Denemark
• [libvirt] [PATCHv2 04/13] virbuf: add auto-indentation support   Peter Krempa
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   David Stevens
• [libvirt] [PATCHv2 05/13] snapshot: indent domain xml when nesting   Peter Krempa
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   Stefan Berger
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   Matthias Bolte
• [libvirt] [PATCH] build: ignore test executable   Eric Blake
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Eric Blake
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Serge E. Hallyn
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   David Stevens
• [libvirt] [PATCH 1/3] Add vapi bindings generation   Marc-André Lureau
• [libvirt] [PATCH 2/3] Remove vir_ prefix from default signal handler   Marc-André Lureau
• [libvirt] [PATCH 3/3] Add gvir_domain_resume()   Marc-André Lureau
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   David Stevens
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   Stefan Berger
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   Matthias Bolte
• [libvirt] [PATCH 2/4] Add new virDomainShutdownFlags API   MATSUDA, Daiki
• [libvirt] [PATCH 0/4] Add support for QEMU guest agent control   MATSUDA, Daiki
• [libvirt] [PATCH 2/4] Add new virDomainShutdownFlags API   Eric Blake
• [libvirt] [PATCH] compile: fix undefined reference to gnutls_x509_crt_get_dn with gcc-4.6.1   Xu He Jie
• [libvirt] [PATCH] pci address conflict when virtio disk with drive type address   Xu He Jie
• [libvirt] [PATCH v2] pci address conflict when virtio disk with drive type   Xu He Jie
• [libvirt] [PATCHv2 04/13] virbuf: add auto-indentation support   Hai Dong Li
• [libvirt] [PATCHv2 05/13] snapshot: indent domain xml when nesting   Hai Dong Li
• [libvirt] Plan for the next release   Daniel Veillard
• [libvirt] [PATCHv2] snapshot: detect when qemu lacks disk-snapshot support   lvroyce
• [libvirt] [FYI] Skript to extract qcow2 snapshot info to libvirt snapshot xml   Philipp Hahn
• [libvirt] [PATCHv2 06/13] snapshot: test domainsnapshot indentation   Hai Dong Li
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   Jiri Denemark
• [libvirt] [PATCH v3] support setting bandwidth from virsh attach-interface   Michal Privoznik
• [libvirt] [PATCH V2 00/10] Make inner workings of nwfilters more flexible + extensions   Daniel P. Berrange
• [libvirt] [PATCH 1/3] Add vapi bindings generation   Daniel P. Berrange
• [libvirt] [PATCH 2/3] Remove vir_ prefix from default signal handler   Daniel P. Berrange
• [libvirt] [PATCH 3/3] Add gvir_domain_resume()   Daniel P. Berrange
• [libvirt] [PATCH 0/4] Add support for QEMU guest agent control   Daniel P. Berrange
• [libvirt] [FYI] Skript to extract qcow2 snapshot info to libvirt snapshot xml   Daniel P. Berrange
• [libvirt] [PATCH v3 0/4] Allow to make disk optional on migration   Daniel Veillard
• [libvirt] [PATCHv2 06/13] snapshot: test domainsnapshot indentation   Peter Krempa
• [libvirt] [PATCH 1/1] lxc: use our own hand-rolled code in place of unlockpt and grantpt (v2)   Daniel P. Berrange
• [libvirt] [PATCH v3 1/4] conf: Introduce optional on_missing attribute for cdrom and floppy   Daniel P. Berrange
• [libvirt] [PATCH v3 2/4] util: Create virFileAccessibleAs function   Daniel P. Berrange
• [libvirt] [PATCH v3 3/4] qemu: implement on_missing   Daniel P. Berrange
• [libvirt] [PATCH v3 4/4] on_missing: Emit event on disk source dropping   Daniel P. Berrange
• [libvirt] [PATCH 1/4] Introduce virFileSync   Daniel P. Berrange
• [libvirt] [PATCH 2/4] Introduce virFileRewrite for safe file rewrite   Daniel P. Berrange
• [libvirt] [PATCH 3/4] Introduce virXMLSaveFile as a wrapper for virFileRewrite   Daniel P. Berrange
• [libvirt] [PATCH 4/4] Use virXMLSaveFile when writing XML config   Daniel P. Berrange
• [libvirt] Re: [FYI] Skript to extract qcow2 snapshot info to libvirt snapshot xml   Nicolas Sebrecht
• [libvirt] [PATCHv2 07/13] snapshot: simplify indentation of sysinfo   Peter Krempa
• [libvirt] [PATCHv2 07/13] snapshot: simplify indentation of sysinfo   Daniel P. Berrange
• [libvirt] [PATCH] The output of domxml-to-native should be the same as the actual commandline.   tangchen
• [libvirt] [PATCH] virsh: Fix vol-info's 'Type' output   Ryota Ozaki
• [libvirt] [PATCH] qemu: Restore the original states of PCI device when restarting daemon   Osier Yang
• [libvirt] [PATCH] virsh: Fix vol-info's 'Type' output   Osier Yang
• [libvirt] [PATCHv2 08/13] snapshot: simplify indentation of cpu features   Peter Krempa
• [libvirt] [PATCHv2 09/13] snapshot: simplify indentation of network xml   Peter Krempa
• [libvirt] [PATCHv2 07/13] snapshot: simplify indentation of sysinfo   Peter Krempa
• [libvirt] [PATCHv2 07/13] snapshot: simplify indentation of sysinfo   Daniel P. Berrange
• [libvirt] [PATCH 0/7] Allow multiple console devices for each guest   Daniel P. Berrange
• [libvirt] [PATCH 1/7] Allow multiple consoles per virtual guest   Daniel P. Berrange
• [libvirt] [PATCH 2/7] Fix crash formatting virtio console   Daniel P. Berrange
• [libvirt] [PATCH 3/7] Rewrite LXC I/O forwarding to use main event loop   Daniel P. Berrange
• [libvirt] [PATCH 4/7] Add support for multiple consoles in LXC   Daniel P. Berrange
• [libvirt] [PATCH 5/7] Default console target type with no <target> element   Daniel P. Berrange
• [libvirt] [PATCH 6/7] Set aliases for LXC/UML console devices   Daniel P. Berrange
• [libvirt] [PATCH 7/7] Fix default console type setting   Daniel P. Berrange
• [libvirt] [PATCH v4 0/5] Allow to make disk optional on migration   Michal Privoznik
• [libvirt] [PATCH v4 1/5] conf: Introduce optional startupPolicy attribute for cdrom and floppy   Michal Privoznik
• [libvirt] [PATCH v4 2/5] util: Create virFileAccessibleAs function   Michal Privoznik
• [libvirt] [PATCH v4 3/5] qemu: Move device alias assigning before command line construction   Michal Privoznik
• [libvirt] [PATCH v4 4/5] qemu: implement startupPolicy   Michal Privoznik
• [libvirt] [PATCH v4 5/5] on_missing: Emit event on disk source dropping   Michal Privoznik
• [libvirt] [PATCH v4 5/5] on_missing: Emit event on disk source dropping   Daniel P. Berrange
• [libvirt] [PATCH v4 1/5] conf: Introduce optional startupPolicy attribute for cdrom and floppy   Daniel P. Berrange
• [libvirt] [PATCH v4 2/5] util: Create virFileAccessibleAs function   Daniel P. Berrange
• [libvirt] [PATCH v4 3/5] qemu: Move device alias assigning before command line construction   Daniel P. Berrange
• [libvirt] [PATCH v4 4/5] qemu: implement startupPolicy   Daniel P. Berrange
• [libvirt] [PATCH v4 2/5] util: Create virFileAccessibleAs function   Eric Blake
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Roopa Prabhu
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Srivatsa S. Bhat
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Roopa Prabhu
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Roopa Prabhu
• [libvirt] passing secrets to block devices   Josh Durgin
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Laine Stump
• [libvirt] passing secrets to block devices   Daniel P. Berrange
• [libvirt] [PATCH] docs: fix incorrect info about routed networks   Laine Stump
• [libvirt] [PATCH] docs: fix incorrect info about routed networks   Eric Blake
• [libvirt] [PATCH] docs: document managed=yes of hostdev passthrough   Eric Blake
• [libvirt] [PATCH] The output of domxml-to-native should be the same as the actual commandline.   Eric Blake
• [libvirt] [PATCH] qemu: simplify use of HAVE_YAJL   Eric Blake
• [libvirt] [FYI] Skript to extract qcow2 snapshot info to libvirt snapshot xml   Eric Blake
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Roopa Prabhu
• [libvirt] [PATCHv2 04/13] virbuf: add auto-indentation support   Eric Blake
• [libvirt] passing secrets to block devices   Josh Durgin
• [libvirt] [PATCHv2 01/13] virbuf: fix const-correctness   Eric Blake
• [libvirt] [PATCHv2 02/13] virbuf: improve testsuite reporting   Eric Blake
• [libvirt] [PATCHv2 03/13] virbuf: more detailed error reporting   Eric Blake
• [libvirt] [PATCHv2 04/13] virbuf: add auto-indentation support   Eric Blake
• [libvirt] [PATCHv2 05/13] snapshot: indent domain xml when nesting   Eric Blake
• [libvirt] [PATCHv2 06/13] snapshot: test domainsnapshot indentation   Eric Blake
• [libvirt] [PATCHv2 07/13] snapshot: simplify indentation of sysinfo   Eric Blake
• [libvirt] [PATCH libvirt-glib] Fix GIR scanner on uninstalled environment   Marc-André Lureau
• [libvirt] [PATCHv2 08/13] snapshot: simplify indentation of cpu features   Eric Blake
• [libvirt] [PATCHv2 09/13] snapshot: simplify indentation of network xml   Eric Blake
• [libvirt] [PATCH libvirt-glib] Fix vapigen on uninstalled environment   Marc-André Lureau
• [libvirt] [libvirt PATCH] support continue/return targets in nwfilter   Eric Blake
• [libvirt] [PATCH] docs: document managed=yes of hostdev passthrough   Osier Yang
• [libvirt] [PATCH] qemu: simplify use of HAVE_YAJL   Wen Congyang
• [libvirt] [PATCH] qemu: Relax -no-shutdown check to [0.14.0, 0.15.0]   lvroyce
• [libvirt] [Qemu-devel] passing secrets to block devices   shu ming
• [libvirt] [libvirt PATCH] support continue/return targets in nwfilter   David Stevens
• [libvirt] [PATCH] esx: Support vSphere 5.x   Patrice LACHANCE
• [libvirt] [PATCH v4 5/5] on_missing: Emit event on disk source dropping   Jiri Denemark
• [libvirt] [PATCH v4 5/5] on_missing: Emit event on disk source dropping   Daniel P. Berrange
• [libvirt] [Qemu-devel] passing secrets to block devices   Daniel P. Berrange
• [libvirt] passing secrets to block devices   Daniel P. Berrange
• [libvirt] [PATCHv2 04/13] virbuf: add auto-indentation support   Hai Dong Li
• [libvirt] [PATCH libvirt-glib] Fix GIR scanner on uninstalled environment   Daniel P. Berrange
• [libvirt] [PATCH libvirt-glib] Fix vapigen on uninstalled environment   Daniel P. Berrange
• [libvirt] [PATCHv2 07/13] snapshot: simplify indentation of sysinfo   Hai Dong Li
• [libvirt] passing secrets to block devices   Kevin Wolf
• [libvirt] passing secrets to block devices   Daniel P. Berrange
• [libvirt] [libvirt-glib] Make vala optional by default   Christophe Fergeau
• [libvirt] [libvirt-glib] Make vala optional by default   Daniel P. Berrange
• [libvirt] [PATCH 0/8 v2] Allow a client to connect to QEMU's VNC by passing an FD via libvirt   Daniel P. Berrange
• [libvirt] [PATCH 1/8] Introduce the virDomainOpenGraphics API   Daniel P. Berrange
• [libvirt] [PATCH 2/8] Extend graphics event to include UNIX socket   Daniel P. Berrange
• [libvirt] [PATCH 3/8] Wire up QEMU implementation for virDomainOpenGraphics   Daniel P. Berrange
• [libvirt] [PATCH 4/8] Add APIs for virNetSocket for sending/receiving file descriptors   Daniel P. Berrange
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Daniel P. Berrange
• [libvirt] [PATCH 6/8] Add client side support for FD passing   Daniel P. Berrange
• [libvirt] [PATCH 7/8] Extend RPC server to allow FD passing   Daniel P. Berrange
• [libvirt] [PATCH 8/8] Implement RPC driver support for virDomainOpenGraphics   Daniel P. Berrange
• [libvirt] [PATCH v5 2/5] util: Create virFileAccessibleAs function   Michal Privoznik
• [libvirt] [PATCH v5 5/5] startupPolicy: Emit event on disk source dropping   Michal Privoznik
• [libvirt] [PATCH v5 5/5] startupPolicy: Emit event on disk source dropping   Daniel P. Berrange
• [libvirt] [PATCH] docs: Document filesystem type='block' for LXC   Ryota Ozaki
• [libvirt] [PATCH v5 5/5] startupPolicy: Emit event on disk source dropping   Eric Blake
• [libvirt] [PATCH v5 2/5] util: Create virFileAccessibleAs function   Eric Blake
• [libvirt] [PATCH] docs: Document filesystem type='block' for LXC   Eric Blake
• [libvirt] [PATCH] qemu: simplify use of HAVE_YAJL   Eric Blake
• [libvirt] [PATCHv2] qemu: simplify use of HAVE_YAJL   Eric Blake
• [libvirt] [PATCH] lxc: check for waitpid failure   Eric Blake
• [libvirt] [PATCH/RFC] Introduce VIR_MIGRATE_FORCE flag to allow for risky migration   Guido Günther
• [libvirt] [PATCHv2 10/13] snapshot: simplify indentation of nwfilter   Peter Krempa
• [libvirt] [PATCH V1 0/4] Support for multiple IP addresses using lists   Stefan Berger
• [libvirt] [PATCH V1 1/4] Rework value part of name-value pairs   Stefan Berger
• [libvirt] [PATCH V1 2/4] Create rules for each member of a list   Stefan Berger
• [libvirt] [PATCH V1 3/4] Parse lists of values   Stefan Berger
• [libvirt] [PATCH V1 4/4] Add test cases for parsing of list values   Stefan Berger
• [libvirt] [PATCHv2 11/13] snapshot: simplify indentation of disk encryption xml   Peter Krempa
• [libvirt] [PATCHv2 12/13] snapshot: minor cleanups from reviewing indentation   Peter Krempa
• [libvirt] [PATCHv2 12/13] snapshot: minor cleanups from reviewing indentation   Eric Blake
• [libvirt] [PATCHv2] waitpid: improve safety   Eric Blake
• [libvirt] [PATCH] storage: avoid null deref on qemu-img failure   Eric Blake
• [libvirt] [PATCH] storage: avoid null deref on qemu-img failure   Peter Krempa
• [libvirt] [PATCH 1/2] storage: plug iscsi memory leak   Eric Blake
• [libvirt] [PATCH 2/2] storage: make previous leak less likely to regress   Eric Blake
• [libvirt] [PATCH] qemu: avoid leaking uninit data from hotplug to dumpxml   Eric Blake
• [libvirt] [PATCH] virsh: Fix vol-info's 'Type' output   Ryota Ozaki
• [libvirt] [PATCH][Take2] virsh: Fix vol-info's 'Type' output   Ryota Ozaki
• [libvirt] [PATCH V1 2/4] Create rules for each member of a list   Stefan Berger
• [libvirt] [PATCH v2] pci address conflict when virtio disk with drive type   Xu He Jie
• [libvirt] [PATCH v3] pci address conflict when virtio disk with drive type   Xu He Jie
• [libvirt] [PATCH] vbox: Add support for VirtualBox 4.1   Matthias Bolte
• [libvirt] [PATCH][Take2] virsh: Fix vol-info's 'Type' output   Osier Yang
• [libvirt] [PATCHv2] qemu: simplify use of HAVE_YAJL   Wen Congyang
• [libvirt] [PATCHv2] waitpid: improve safety   Daniel P. Berrange
• [libvirt] [PATCH/RFC] Introduce VIR_MIGRATE_FORCE flag to allow for risky migration   Daniel P. Berrange
• [libvirt] How to use "virsh migrat" with p2p option?   Guangya Liu
• [libvirt] How to use "virsh migrat" with p2p option?   Guangya Liu
• [libvirt] Expose qemu monitor command query_block?   Osier Yang
• [libvirt] Expose qemu monitor command query_block?   Daniel P. Berrange
• [libvirt] Expose qemu monitor command query_block?   Osier Yang
• [libvirt] [PATCH] qemu: avoid leaking uninit data from hotplug to dumpxml   Michal Privoznik
• [libvirt] [PATCH v6 2/5] util: Create virFileAccessibleAs function   Michal Privoznik
• [libvirt] [PATCH] storage: Fix error message on vol-create-from failure   Ryota Ozaki
• [libvirt] [PATCH] qemu: Forbid specify target path for disk vol   Osier Yang
• [libvirt] [PATCH] qemu: Forbid specify target path for disk vol   Daniel P. Berrange
• [libvirt] [PATCH] storage: Fix error message on vol-create-from failure   Ryota Ozaki
• [libvirt] [PATCH] virsh: Fix error message on vol-create-from failure   Ryota Ozaki
• [libvirt] [PATCH] doc: Correct the default werror policy   Osier Yang
• [libvirt] [PATCH] qemu: Forbid specify target path for disk vol   Osier Yang
• [libvirt] [PATCH V2 0/4] Support for multiple IP addresses using lists   Stefan Berger
• [libvirt] [PATCH V2 1/4] Rework value part of name-value pairs   Stefan Berger
• [libvirt] [PATCH V2 2/4] Create rules for each member of a list   Stefan Berger
• [libvirt] [PATCH V2 3/4] Parse lists of values   Stefan Berger
• [libvirt] [PATCH V2 4/4] Add test cases for parsing of list values   Stefan Berger
• [libvirt] [PATCH] Add documentation about migration.   Daniel P. Berrange
• [libvirt] [PATCH V2 3/4] Parse lists of values   Daniel P. Berrange
• [libvirt] [PATCH V2 3/4] Parse lists of values   Stefan Berger
• [libvirt] [PATCH] Add a systemtap script for watching QEMU monitor interactions   Daniel P. Berrange
• [libvirt] [PATCH V3 0/4] Support for multiple IP addresses using lists   Stefan Berger
• [libvirt] [PATCH V3 1/4] Rework value part of name-value pairs   Stefan Berger
• [libvirt] [PATCH V3 2/4] Create rules for each member of a list   Stefan Berger
• [libvirt] [PATCH V3 3/4] Extend NWFilter parameter parser to cope with lists of values   Stefan Berger
• [libvirt] [PATCH V3 4/4] Add test cases for parsing of list values   Stefan Berger
• [libvirt] [PATCH V3 3/4] Extend NWFilter parameter parser to cope with lists of values   Matthias Bolte
• [libvirt] [PATCH] Fix off-by-one printing month in logging code   Daniel P. Berrange
• [libvirt] [PATCH] Report 'errno' in int1 field of virErrorPtr   Daniel P. Berrange
• [libvirt] libvirt and clustered volume group problems   Rommer
• [libvirt] [PATCH V3 3/4] Extend NWFilter parameter parser to cope with lists of values   Stefan Berger
• [libvirt] [PATCH] Fix off-by-one printing month in logging code   Eric Blake
• [libvirt] [PATCH] Report 'errno' in int1 field of virErrorPtr   Eric Blake
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Stefan Berger
• [libvirt] [PATCH] Add a systemtap script for watching QEMU monitor interactions   Alon Levy
• [libvirt] [PATCH 1/8] Introduce the virDomainOpenGraphics API   Eric Blake
• [libvirt] [PATCH 2/8] Extend graphics event to include UNIX socket   Eric Blake
• [libvirt] [PATCH] qemu: avoid leaking uninit data from hotplug to dumpxml   Eric Blake
• [libvirt] [PATCH 3/8] Wire up QEMU implementation for virDomainOpenGraphics   Eric Blake
• [libvirt] [PATCH 4/8] Add APIs for virNetSocket for sending/receiving file descriptors   Eric Blake
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Eric Blake
• [libvirt] [PATCHv2] waitpid: improve safety   Eric Blake
• [libvirt] [PATCH/RFC] Introduce VIR_MIGRATE_FORCE flag to allow for risky migration   Eric Blake
• [libvirt] [PATCH 6/8] Add client side support for FD passing   Eric Blake
• [libvirt] [PATCH 7/8] Extend RPC server to allow FD passing   Eric Blake
• [libvirt] [PATCH 8/8] Implement RPC driver support for virDomainOpenGraphics   Eric Blake
• [libvirt] [PATCH] build: use gnulib fdatasync   Eric Blake
• [libvirt] [PATCH 2/4] Introduce virFileRewrite for safe file rewrite   Eric Blake
• [libvirt] [PATCH 3/4] Introduce virXMLSaveFile as a wrapper for virFileRewrite   Eric Blake
• [libvirt] [libvirt PATCHv4 0/2] DHCP Snooping support for libvirt   David L Stevens
• [libvirt] [libvirt PATCHv4 1/2] add DHCP snooping   David L Stevens
• [libvirt] [libvirt PATCHv4 2/2] add leasefile support   David L Stevens
• [libvirt] [PATCH] vbox: Add support for VirtualBox 4.1   Eric Blake
• [libvirt] How to use "virsh migrat" with p2p option?   Eric Blake
• [libvirt] [PATCH v6 2/5] util: Create virFileAccessibleAs function   Eric Blake
• [libvirt] [PATCH 0/2] V2 Modify generic ethernet interface so it will work when sVirt is enabled with qemu   Tyler Coumbes
• [libvirt] [PATCH 1/2] V2 Modify generic ethernet interface so it will work when sVirt is enabled with qemu   Tyler Coumbes
• [libvirt] [PATCH 2/2] V2 Modify generic ethernet interface so it will work when sVirt is enabled with qemu   Tyler Coumbes
• [libvirt] [PATCH 1/2] storage: plug iscsi memory leak   Laine Stump
• [libvirt] [PATCH 2/2] storage: make previous leak less likely to regress   Laine Stump
• [libvirt] 回复: Re: How to use "virsh migrat" with p2p option?   Guangya Liu
• [libvirt] libvirt and clustered volume group problems   Osier Yang
• [libvirt] [PATCH 2/2] storage: make previous leak less likely to regress   Eric Blake
• [libvirt] [PATCH 0/3] Restrict saved-state and core-dump files in controlled directories   Hong Xiang
• [libvirt] [PATCH 1/3] New util API virBase64EncodePathname/virBase64DecodePathname   Hong Xiang
• [libvirt] [PATCH 2/3] Remove virFileAbsPath() from virDomainSave*() and virDomainCoreDump() calls   Hong Xiang
• [libvirt] [PATCH 3/3] Encode input file id in qemuDomainSave/Restore and qemudDomainCoreDump   Hong Xiang
• [libvirt] [PATCH 0/4] New APIs and virsh commands to manage saved-state & core-dump files   Hong Xiang
• [libvirt] [PATCH 1/4] New APIs to manage saved-state & core-dump files.   Hong Xiang
• [libvirt] [PATCH 2/4] qemu driver for new APIs to manage saved-state & core-dump files   Hong Xiang
• [libvirt] [PATCH 3/4] remote driver for new APIs to manage saved-state & core-dump files   Hong Xiang
• [libvirt] [PATCH 4/4] New virsh commands to manage saved-state and core-dump files   Hong Xiang
• [libvirt] [PATCH v4 0/5] Allow to make disk optional on migration   Michal Privoznik
• [libvirt] [PATCH/RFC] Introduce VIR_MIGRATE_FORCE flag to allow for risky migration   Daniel P. Berrange
• [libvirt] [PATCH 3/3] Encode input file id in qemuDomainSave/Restore and qemudDomainCoreDump   Daniel P. Berrange
• [libvirt] [PATCH] fix compile error :undefined reference to `virFileAccessibleAs'   taget at linux.vnet.ibm.com
• [libvirt] [PATCH 2/3] Remove virFileAbsPath() from virDomainSave*() and virDomainCoreDump() calls   Daniel P. Berrange
• [libvirt] [PATCH 1/4] New APIs to manage saved-state & core-dump files.   Daniel P. Berrange
• [libvirt] Minor correction in the website text   Siddhesh Poyarekar
• [libvirt] [PATCH] util: Add virFileAccessibleAs to private symbols   Michal Privoznik
• [libvirt] [PATCH] fix compile error :undefined reference to `virFileAccessibleAs'   Michal Privoznik
• [libvirt] [PATCH] build: use gnulib fdatasync   Jiri Denemark
• [libvirt] [PATCH 1/4] New APIs to manage saved-state & core-dump files.   Hong Xiang
• [libvirt] [libvirt PATCHv4 0/2] DHCP Snooping support for libvirt   Stefan Berger
• [libvirt] [PATCH 1/8] Introduce the virDomainOpenGraphics API   Daniel P. Berrange
• [libvirt] [PATCH 4/8] Add APIs for virNetSocket for sending/receiving file descriptors   Daniel P. Berrange
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Daniel P. Berrange
• [libvirt] [PATCH 6/8] Add client side support for FD passing   Daniel P. Berrange
• [libvirt] [libvirt PATCHv4 1/2] add DHCP snooping   Stefan Berger
• [libvirt] [libvirt PATCHv4 2/2] add leasefile support   Stefan Berger
• [libvirt] [PATCH] nwfilter: extend schema to support new targets   Stefan Berger
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Eric Blake
• [libvirt] [PATCH] nwfilter: extend schema to support new targets   Eric Blake
• [libvirt] [PATCH] nwfilter: extend schema to support new targets   Stefan Berger
• [libvirt] [PATCH] nwfilter: extend schema to support new targets   Eric Blake
• [libvirt] [PATCH] build: use gnulib fdatasync   Eric Blake
• [libvirt] [PATCH] build: use gnulib fdatasync   Pádraig Brady
• [libvirt] [PATCH] build: use gnulib fdatasync   Daniel P. Berrange
• [libvirt] [PATCH] build: use gnulib fdatasync   Eric Blake
• [libvirt] [PATCH 0/8 v3] Allow a client to connect to QEMU's VNC by passing an FD via libvirt   Daniel P. Berrange
• [libvirt] [PATCH 1/8] Introduce the virDomainOpenGraphics API   Daniel P. Berrange
• [libvirt] [PATCH 2/8] Extend graphics event to include UNIX socket   Daniel P. Berrange
• [libvirt] [PATCH 3/8] Wire up QEMU implementation for virDomainOpenGraphics   Daniel P. Berrange
• [libvirt] [PATCH 4/8] Add APIs for virNetSocket for sending/receiving file descriptors   Daniel P. Berrange
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Daniel P. Berrange
• [libvirt] [PATCH 6/8] Add client side support for FD passing   Daniel P. Berrange
• [libvirt] [PATCH 7/8] Extend RPC server to allow FD passing   Daniel P. Berrange
• [libvirt] [PATCH 8/8] Implement RPC driver support for virDomainOpenGraphics   Daniel P. Berrange
• [libvirt] [PATCH] build: use gnulib fdatasync   Pádraig Brady
• [libvirt] [PATCH/RFC] Introduce VIR_MIGRATE_FORCE flag to allow for risky migration   Guido Günther
• [libvirt] [libvirt PATCHv4 0/2] DHCP Snooping support for libvirt   David Stevens
• [libvirt] [libvirt PATCHv4 0/2] DHCP Snooping support for libvirt   Stefan Berger
• [libvirt] [libvirt PATCHv3 03/10] reverse sense of address matching   Stefan Berger
• [libvirt] [libvirt PATCHv3 03/10] reverse sense of address matching   David Stevens
• [libvirt] [libosinfo 1/2] Set GError even if libvirt error is unknown   Zeeshan Ali (Khattak)
• [libvirt] [libosinfo 2/2] Add gvir_connection_create_storage_pool()   Zeeshan Ali (Khattak)
• [libvirt] [PATCH] build: use gnulib fdatasync   Daniel P. Berrange
• [libvirt] [libosinfo 1/2] Set GError even if libvirt error is unknown   Daniel P. Berrange
• [libvirt] [libosinfo 2/2] Add gvir_connection_create_storage_pool()   Daniel P. Berrange
• [libvirt] [PATCH v4 1/2] Add VIR_TYPED_PARAM_STRING   Eric Blake
• [libvirt] [PATCH v4 1/2] Add VIR_TYPED_PARAM_STRING   Eric Blake
• [libvirt] [libosinfo 1/2] Add gvir_connection_create_storage_pool()   Zeeshan Ali (Khattak)
• [libvirt] [libosinfo 2/2] Add API to build & start storage pools   Zeeshan Ali (Khattak)
• [libvirt] [libosinfo 2/2] Add gvir_connection_create_storage_pool()   Zeeshan Ali (Khattak)
• [libvirt] [libvirt PATCHv3 03/10] reverse sense of address matching   Stefan Berger
• [libvirt] [PATCH v4 2/2] add interface for blkio.weight_device   Eric Blake
• [libvirt] [PATCH v4 1/2] Add VIR_TYPED_PARAM_STRING   Eric Blake
• [libvirt] [PATCH 0/7] Update systemtap probing   lvroyce
• [libvirt] [PATCH 0/7] Update systemtap probing   Daniel P. Berrange
• [libvirt] [libosinfo 2/2] Add gvir_connection_create_storage_pool()   Daniel P. Berrange
• [libvirt] [PATCH] startupPolicty: Minor cleanups   Michal Privoznik
• [libvirt] [PATCH v4 1/2] Add VIR_TYPED_PARAM_STRING   Daniel P. Berrange
• [libvirt] [PATCH] virsh: Fix error message on vol-create-from failure   Wenyi Gao
• [libvirt] [PATCH] startupPolicy: Change event argument   Michal Privoznik
• [libvirt] [PATCH] startupPolicy: Change event argument   Daniel P. Berrange
• [libvirt] [PATCH] startupPolicy: Change event argument   Michal Privoznik
• [libvirt] [PATCH] startupPolicy: Change event argument   Daniel P. Berrange
• [libvirt] [PATCH] virsh: Fix error message on vol-create-from failure   Ryota Ozaki
• [libvirt] [PATCH V4 00/10] Make inner workings of nwfilters more flexible + extensions   Stefan Berger
• [libvirt] [PATCH V4 01/10] Extend virHashTable with function to get hash tables keys   Stefan Berger
• [libvirt] [PATCH V4 02/10] Introduce an internal priority for chains   Stefan Berger
• [libvirt] [PATCH V4 03/10] Make filter creation in root table more flexible   Stefan Berger
• [libvirt] [PATCH V4 04/10] Use scripting for cleaning and renaming of chains   Stefan Berger
• [libvirt] [PATCH V4 05/10] Use the actual names of chains in data structure   Stefan Berger
• [libvirt] [PATCH V4 06/10] Extend the filter XML to support priorities of chains   Stefan Berger
• [libvirt] [PATCH V4 07/10] Enable chains with names having a known prefix   Stefan Berger
• [libvirt] [PATCH V4 08/10] Extend rule priorities into negative numbers   Stefan Berger
• [libvirt] [PATCH V4 09/10] Interleave jumping into chains with filtering rules in root table   Stefan Berger
• [libvirt] [PATCH V4 10/10] Add test cases   Stefan Berger
• [libvirt] [PATCH 0/7] Update systemtap probing   Smith Brian
• [libvirt] [PATCH V1 0/9] NWFilter: Filter more protocols and other extensions   Stefan Berger
• [libvirt] [PATCH V1 1/9] Add support for VLAN filtering   Stefan Berger
• [libvirt] [PATCH V1 2/9] Add test cases for VLAN traffic filtering   Stefan Berger
• [libvirt] [PATCH V1 3/9] Add documentation for VLAN filtering support   Stefan Berger
• [libvirt] [PATCH V1 4/9] Add a mac chain   Stefan Berger
• [libvirt] [PATCH V1 5/9] Add support for STP filtering   Stefan Berger
• [libvirt] [PATCH V1 6/9] Add test cases for STP traffic filtering   Stefan Berger
• [libvirt] [PATCH V1 7/9] Add documentation for STP filtering support   Stefan Berger
• [libvirt] [PATCH V1 8/9] [RFC] New filters to handle multiple IP addresses   Stefan Berger
• [libvirt] [PATCH V1 9/9] Improve error reporting of failures to apply filtering rules   Stefan Berger
• [libvirt] [PATCH 0/7] Update systemtap probing   Smith Brian
• [libvirt] [PATCH] nwfilter: extend schema to support new targets   Stefan Berger
• [libvirt] [PATCH 0/7] Update systemtap probing   Daniel P. Berrange
• [libvirt] [libosinfo 1/2] Add gvir_connection_create_storage_pool()   Daniel P. Berrange
• [libvirt] [libosinfo 2/2] Add API to build & start storage pools   Daniel P. Berrange
• [libvirt] [PATCH] startupPolicy: Change event argument   Eric Blake
• [libvirt] changes to domain XML for SCSI support   Paolo Bonzini
• [libvirt] changes to domain XML for SCSI support   Dave Allan
• [libvirt] [PATCH] build: avoid RHEL 5 build failure on LXC   Eric Blake
• [libvirt] [libosinfo 1/2] Add gvir_connection_create_storage_pool()   Zeeshan Ali (Khattak)
• [libvirt] [libosinfo 1/2] Add gvir_connection_create_storage_pool()   Daniel P. Berrange
• [libvirt] [libvirt-glib 1/2] Add API to build & start storage pools   Zeeshan Ali (Khattak)
• [libvirt] [libvirt-glib 2/2] Async API to build & start storage pools   Zeeshan Ali (Khattak)
• [libvirt] [PATCH] storage: avoid null deref on qemu-img failure   Eric Blake
• [libvirt] changes to domain XML for SCSI support   Paolo Bonzini
• [libvirt] [PATCH] doc: Correct the default werror policy   Laine Stump
• [libvirt] [PATCHv2 10/13] snapshot: simplify indentation of nwfilter   Eric Blake
• [libvirt] [PATCHv2 11/13] snapshot: simplify indentation of disk encryption xml   Eric Blake
• [libvirt] [PATCHv2 12/13] snapshot: minor cleanups from reviewing indentation   Eric Blake
• [libvirt] [PATCHv2] qemu: simplify use of HAVE_YAJL   Eric Blake
• [libvirt] [libvirt PATCHv4 1/2] add DHCP snooping   Stefan Berger
• [libvirt] [PATCH] Add documentation about migration.   Eric Blake
• [libvirt] [PATCH 1/4] Introduce virFileSync   Jiri Denemark
• [libvirt] [PATCH 3/4] Introduce virXMLSaveFile as a wrapper for virFileRewrite   Jiri Denemark
• [libvirt] [PATCH 2/4] Introduce virFileRewrite for safe file rewrite   Jiri Denemark
• [libvirt] [PATCH] Add a systemtap script for watching QEMU monitor interactions   Eric Blake
• [libvirt] Minor correction in the website text   Eric Blake
• [libvirt] [libvirt PATCHv4 1/2] add DHCP snooping   David Stevens
• [libvirt] [PATCH] qemu: avoid leaking uninit data from hotplug to dumpxml   Eric Blake
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Roopa Prabhu
• [libvirt] [RFC PATCH v3 0/4] Improve Ceph Qemu+RBD support   Sage Weil
• [libvirt] [PATCH] lxc: avoid missing '{' in the function   ajia at redhat.com
• [libvirt] [PATCH] lxc: avoid null deref on lxcSetupLoopDevices failure   ajia at redhat.com
• [libvirt] [PATCH] lxc: remove redundant check   ajia at redhat.com
• [libvirt] [PATCH] lxc: avoid missing '{' in the function   Peter Krempa
• [libvirt] [libvirt-glib 1/2] Add API to build & start storage pools   Daniel P. Berrange
• [libvirt] [libvirt-glib 2/2] Async API to build & start storage pools   Daniel P. Berrange
• [libvirt] [PATCH] lxc: avoid null deref on lxcSetupLoopDevices failure   Peter Krempa
• [libvirt] changes to domain XML for SCSI support   Osier Yang
• [libvirt] [PATCH] lxc: avoid missing '{' in the function   Daniel P. Berrange
• [libvirt] [PATCH] lxc: avoid null deref on lxcSetupLoopDevices failure   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove redundant check   Daniel P. Berrange
• [libvirt] [PATCH] Fix typo in virFileAccessibleAs   Daniel P. Berrange
• [libvirt] [RFC PATCH v3 1/4] secret: add Ceph secret type   Daniel P. Berrange
• [libvirt] [RFC PATCH v3 2/4] storage: add auth to virDomainDiskDef   Daniel P. Berrange
• [libvirt] [RFC PATCH v3 3/4] qemu: pass virConnectPtr into Domain{Attach, Detach}*   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove redundant check   Alex Jia
• [libvirt] [PATCH] lxc: avoid null deref on lxcSetupLoopDevices failure   Peter Krempa
• [libvirt] [RFC PATCH v3 4/4] qemu/rbd: improve rbd device specification   Daniel P. Berrange
• [libvirt] [PATCH] lxc: avoid missing '{' in the function   Alex Jia
• [libvirt] [RFC PATCH 0/8 v2] Summary on block IO throttle   Lei Li
• [libvirt] changes to domain XML for SCSI support   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/8 v2] Summary on block IO throttle   Lei Li
• [libvirt] [PATCH 1/8] Add new API virDomainSetBlockIoThrottle   Lei Li
• [libvirt] [PATCH 2/8] Add Block IO Throttle support setting to the remote driver   Lei Li
• [libvirt] [PATCH 3/8] Implement Block Io Throttle setting for the qemu driver   Lei Li
• [libvirt] [PATCH 4/8] Add new API virDomainGetBlockIoThrottle   Lei Li
• [libvirt] [PATCH 5/8] Getting Block IO Throttle support to remote driver   Lei Li
• [libvirt] [PATCH 6/8] Implement Get Block IO Throttle for qemu driver   Lei Li
• [libvirt] [PATCH 7/8] Enable the blkiothrottle command in virsh   Lei Li
• [libvirt] [PATCH 8/8] Support virDomainGetBlockIoThrottle in the python API   Lei Li
• [libvirt] [PATCH] lxc: avoid null deref on lxcSetupLoopDevices failure   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove redundant check   Daniel P. Berrange
• [libvirt] [PATCH] lxc: avoid missing '{' in the function   Daniel P. Berrange
• [libvirt] [PATCH] Add a systemtap script for watching QEMU monitor interactions   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove redundant check   Alex Jia
• [libvirt] [PATCH v2] Add documentation about migration.   Daniel P. Berrange
• [libvirt] [PATCH] lxc: avoid missing '{' in the function   Alex Jia
• [libvirt] [PATCH] Add documentation about migration.   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove redundant check   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove redundant check   Alex Jia
• [libvirt] [PATCH V3 3/4] Extend NWFilter parameter parser to cope with lists of values   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove dummy function   ajia at redhat.com
• [libvirt] [PATCH V3 1/4] Rework value part of name-value pairs   Daniel P. Berrange
• [libvirt] [PATCH V3 2/4] Create rules for each member of a list   Daniel P. Berrange
• [libvirt] [PATCH V3 4/4] Add test cases for parsing of list values   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove dummy function   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove redundant check   Alex Jia
• [libvirt] [PATCH] lxc: remove redundant check   Michal Privoznik
• [libvirt] [PATCH] lxc: remove redundant check   Daniel P. Berrange
• [libvirt] [PATCH] lxc: remove redundant check   Alex Jia
• [libvirt] changes to domain XML for SCSI support   Paolo Bonzini
• [libvirt] [PATCH V3 3/4] Extend NWFilter parameter parser to cope with lists of values   Stefan Berger
• [libvirt] [PATCH V3 1/4] Rework value part of name-value pairs   Stefan Berger
• [libvirt] QEMU 1.0 test day - November 7th   Paolo Bonzini
• [libvirt] custom network filter   Shahar Havivi
• [libvirt] custom network filter   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/8 v2] Summary on block IO throttle   Eric Blake
• [libvirt] [PATCH v4 00/13] Implement keepalive protocol for libvirt RPC   Jiri Denemark
• [libvirt] [PATCH v4 01/13] Define keepalive protocol   Jiri Denemark
• [libvirt] [PATCH v4 02/13] Implement common keepalive handling   Jiri Denemark
• [libvirt] [PATCH v4 03/13] Introduce virConnectSetKeepAlive   Jiri Denemark
• [libvirt] [PATCH v4 04/13] virsh: Always run event loop   Jiri Denemark
• [libvirt] [PATCH v4 05/13] Implement keepalive protocol in libvirt daemon   Jiri Denemark
• [libvirt] [PATCH v4 06/13] Add support for non-blocking calls in client RPC   Jiri Denemark
• [libvirt] [PATCH v4 07/13] Add support for async close of client RPC socket   Jiri Denemark
• [libvirt] [PATCH v4 08/13] Implement keepalive protocol in remote driver   Jiri Denemark
• [libvirt] [PATCH v4 09/13] Introduce virConnectIsAlive API   Jiri Denemark
• [libvirt] [PATCH v4 10/13] Implement virConnectIsAlive in all drivers   Jiri Denemark
• [libvirt] [PATCH v4 11/13] Add keepalive support into domain-events examples   Jiri Denemark
• [libvirt] [PATCH v4 12/13] qemu: Add support for keepalive messages during p2p migration   Jiri Denemark
• [libvirt] [PATCH v4 13/13] qemu: Cancel p2p migration when connection breaks   Jiri Denemark
• [libvirt] [PATCH 2/4] Introduce virFileRewrite for safe file rewrite   Eric Blake
• [libvirt] [PATCH v3 10/13] Implement virConnectIsAlive in all drivers   Jiri Denemark
• [libvirt] [libvirt PATCHv4 1/2] add DHCP snooping   Stefan Berger
• [libvirt] [PATCH V3 2/4] Create rules for each member of a list   Stefan Berger
• [libvirt] [PATCH 0/4] Make rewriting XML files more robust   Jiri Denemark
• [libvirt] [libvirt PATCHv4 1/2] add DHCP snooping   David Stevens
• [libvirt] [libvirt PATCHv4 1/2] add DHCP snooping   Stefan Berger
• [libvirt] [PATCH 1/8] Add new API virDomainSetBlockIoThrottle   Adam Litke
• [libvirt] [PATCH 1/8] Add new API virDomainSetBlockIoThrottle   Eric Blake
• [libvirt] [PATCH 2/8] Add Block IO Throttle support setting to the remote driver   Adam Litke
• [libvirt] [PATCH 3/8] Implement Block Io Throttle setting for the qemu driver   Adam Litke
• [libvirt] [PATCH 4/8] Add new API virDomainGetBlockIoThrottle   Adam Litke
• [libvirt] [PATCH V4 0/4] Support for multiple IP addresses using lists   Stefan Berger
• [libvirt] [PATCH V4 1/4] Rework value part of name-value pairs   Stefan Berger
• [libvirt] [PATCH V4 2/4] Create rules for each member of a list   Stefan Berger
• [libvirt] [PATCH V4 3/4] Extend NWFilter parameter parser to cope with lists of values   Stefan Berger
• [libvirt] [PATCH V4 4/4] Add test cases for parsing of list values   Stefan Berger
• [libvirt] [PATCH 5/8] Getting Block IO Throttle support to remote driver   Adam Litke
• [libvirt] [PATCH 6/8] Implement Get Block IO Throttle for qemu driver   Adam Litke
• [libvirt] [PATCH 7/8] Enable the blkiothrottle command in virsh   Adam Litke
• [libvirt] [PATCH v3] pci address conflict when virtio disk with drive type   Eric Blake
• [libvirt] [PATCH 1/8] Introduce the virDomainOpenGraphics API   Eric Blake
• [libvirt] [PATCH 2/8] Extend graphics event to include UNIX socket   Eric Blake
• [libvirt] [PATCH 3/8] Wire up QEMU implementation for virDomainOpenGraphics   Eric Blake
• [libvirt] [PATCH 4/8] Add APIs for virNetSocket for sending/receiving file descriptors   Eric Blake
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Eric Blake
• [libvirt] [PATCH 6/8] Add client side support for FD passing   Eric Blake
• [libvirt] [PATCH 7/8] Extend RPC server to allow FD passing   Eric Blake
• [libvirt] [PATCH 8/8] Implement RPC driver support for virDomainOpenGraphics   Eric Blake
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Roopa Prabhu
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Eric Blake
• [libvirt] [PATCH 1/2] V2 Modify generic ethernet interface so it will work when sVirt is enabled with qemu   Eric Blake
• [libvirt] [PATCH 2/2] V2 Modify generic ethernet interface so it will work when sVirt is enabled with qemu   Eric Blake
• [libvirt] [PATCH] startupPolicty: Minor cleanups   Eric Blake
• [libvirt] [PATCH] virsh: Fix error message on vol-create-from failure   Eric Blake
• [libvirt] [PATCH v2] Add documentation about migration.   Eric Blake
• [libvirt] [PATCH] lxc: remove redundant check   Eric Blake
• [libvirt] [PATCH] macvtap: Fix error return values to -1 instead of 1   Roopa Prabhu
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Daniel P. Berrange
• [libvirt] [PATCH 0/7] Update systemtap probing   lvroyce
• [libvirt] [PATCH 0/7] Update systemtap probing   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/8 v2] Summary on block IO throttle   Lei Li
• [libvirt] [PATCH 1/8] Add new API virDomainSetBlockIoThrottle   Lei Li
• [libvirt] [PATCH 6/8] Implement Get Block IO Throttle for qemu driver   Lei Li
• [libvirt] [PATCH 7/8] Enable the blkiothrottle command in virsh   Lei Li
• [libvirt] [PATCH v3] pci address conflict when virtio disk with drive type   Xu He Jie
• [libvirt] [PATCH 0/7] Update systemtap probing   lvroyce
• [libvirt] [PATCH v4] pci address conflict when virtio disk with drive type   Xu He Jie
• [libvirt] [PATCH] util: Fix virUUIDGeneratePseudoRandomBytes   Ryota Ozaki
• [libvirt] [PATCH] qemu: plug memory leak   ajia at redhat.com
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Eric Blake
• [libvirt] [PATCH 5/8] Extend RPC protocol to allow FD passing   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/8 v2] Summary on block IO throttle   Eric Blake
• [libvirt] [PATCH] qemu: avoid leaking uninit data from hotplug to dumpxml   Laine Stump
• [libvirt] [PATCH] util: Fix virUUIDGeneratePseudoRandomBytes   Eric Blake
• [libvirt] [RFC PATCH 0/8 v2] Summary on block IO throttle   Daniel P. Berrange
• [libvirt] [RFC PATCH 0/8 v2] Summary on block IO throttle   Daniel P. Berrange
• [libvirt] [PATCH] qemu: avoid leaking uninit data from hotplug to dumpxml   Eric Blake
• [libvirt] [PATCH] qemu: plug memory leak   Eric Blake
• [libvirt] [RFC PATCH v3 1/4] secret: add Ceph secret type   Eric Blake
• [libvirt] [RFC PATCH v3 1/4] secret: add Ceph secret type   Eric Blake
• [libvirt] [PATCH] qemu: plug memory leak   Alex Jia
• [libvirt] [RFC PATCH v3 1/4] secret: add Ceph secret type   Eric Blake
• [libvirt] [RFC PATCH v3 1/4] secret: add Ceph secret type   Josh Durgin
• [libvirt] [RFC PATCH v3 2/4] storage: add auth to virDomainDiskDef   Eric Blake
• [libvirt] [RFC PATCH v3 1/4] secret: add Ceph secret type   Eric Blake
• [libvirt] [RFC PATCH v3 2/4] storage: add auth to virDomainDiskDef   Josh Durgin
• [libvirt] [PATCH v4] pci address conflict when virtio disk with drive type   Eric Blake
• [libvirt] [PATCH V4 1/4] Rework value part of name-value pairs   Eric Blake
• [libvirt] [PATCH v4 4/4] qemu/rbd: improve rbd device specification   Josh Durgin
• [libvirt] [PATCH 1/1] Use a common xml type for ceph secret usage.   Josh Durgin
• [libvirt] [PATCH V4 2/4] Create rules for each member of a list   Eric Blake
• [libvirt] [PATCH V4 3/4] Extend NWFilter parameter parser to cope with lists of values   Eric Blake
• [libvirt] [PATCH V4 4/4] Add test cases for parsing of list values   Eric Blake
• [libvirt] [PATCH 1/1] Use a common xml type for ceph secret usage.   Eric Blake
• [libvirt] [PATCH] macvtap: Fix error return value convention/inconsistencies   Roopa Prabhu
• [libvirt] [PATCH] macvtap: Fix error return value convention/inconsistencies   Eric Blake
• [libvirt] [PATCH] qemu: Restore the original states of PCI device when restarting daemon   Eric Blake
• [libvirt] RFC decoupling VM NIC provisioning from VM NIC connection to backend networks   Sumit Naiksatam (snaiksat)
• [libvirt] [PATCH 1/7] Allow multiple consoles per virtual guest   Eric Blake
• [libvirt] [PATCH 2/2] V2 Modify generic ethernet interface so it will work when sVirt is enabled with qemu   Tyler Coumbes
• [libvirt] [PATCH] util: Fix virUUIDGeneratePseudoRandomBytes   Ryota Ozaki
• [libvirt] [PATCH] qemu: plug memory leak   ajia at redhat.com
• [libvirt] [PATCH] daemon: plug memory leak   ajia at redhat.com
• [libvirt] [PATCH] xenapi: Improve error reporting in xenapiOpen once again   Matthias Bolte
• [libvirt] [PATCH] vbox: Support shared folders   Matthias Bolte
• [libvirt] [PATCH] vbox: Add support for VirtualBox 4.1   Matthias Bolte
• [libvirt] [PATCH] qemu: Restore the original states of PCI device when restarting daemon   Osier Yang
• [libvirt] [PATCH v4] pci address conflict when virtio disk with drive type   Xu He Jie
• [libvirt] [PATCH] storage: add lvchange operation while lvremove fails.   chang liu
• [libvirt] building failed   Wen Congyang
• [libvirt] building failed   lingjiao.lc
• [libvirt] building failed   Wen Congyang
• [libvirt] building failed   Osier Yang
• [libvirt] building failed   Wen Congyang
• [libvirt] [PATCH] storage: add lvchange operation while lvremove fails.   zituan at taobao.com
• [libvirt] [PATCH] storage: add lvchange operation while lvremove fails.   Osier Yang
• [libvirt] [PATCH] doc: Correct the default werror policy   Osier Yang
• [libvirt] how can I get these packages?   chang liu
• [libvirt] how can I get these packages?   Daniel Veillard
• [libvirt] how can I get these packages?   Osier Yang
• [libvirt] how can I get these packages?   chang liu
• [libvirt] Start of freeze for libvirt-0.9.7 and availability of rc1   Daniel Veillard
• [libvirt] [BUG] Fix order of disks and controllers   Philipp Hahn
• [libvirt] RFC decoupling VM NIC provisioning from VM NIC connection to backend networks   Daniel P. Berrange
• [libvirt] building failed   Daniel P. Berrange
• [libvirt] [BUG] Fix order of disks and controllers   Daniel P. Berrange
• [libvirt] [PATCH] Fix URI alias prefix matching   Wen Ruo Lv (none)
• [libvirt] [PATCH V4 1/4] Rework value part of name-value pairs   Stefan Berger
• [libvirt] [PATCH V4 2/4] Create rules for each member of a list   Stefan Berger
• [libvirt] [PATCH V4 3/4] Extend NWFilter parameter parser to cope with lists of values   Stefan Berger
• [libvirt] [PATCH V4 4/4] Add test cases for parsing of list values   Stefan Berger
• [libvirt] [PATCH] xen: fix PyGrub device order using boot/@order   Philipp Hahn
• [libvirt] [PATCH v2 2/4] xen: support bootable flag for Xen-PV.   Philipp Hahn
• [libvirt] [PATCH v2 4/4] test/xen: PyGrub device order using boot/@order   Philipp Hahn
• [libvirt] [PATCH v2 3/4] xen: fix PyGrub device order using boot/@order   Philipp Hahn
• [libvirt] [PATCH V5 0/4] Support for multiple IP addresses using lists   Stefan Berger
• [libvirt] [PATCH V5 1/4] Rework value part of name-value pairs   Stefan Berger
• [libvirt] [PATCH V5 2/4] Create rules for each member of a list   Stefan Berger
• [libvirt] [PATCH V5 3/4] Extend NWFilter parameter parser to cope with lists of values   Stefan Berger
• [libvirt] [PATCH V5 4/4] Add test cases for parsing of list values   Stefan Berger
• [libvirt] [Libvirt-announce] Start of freeze for libvirt-0.9.7 and availability of rc1   Matthias Bolte
• [libvirt] [Qemu-devel] RFC decoupling VM NIC provisioning from VM NIC connection to backend networks   Markus Armbruster
• [libvirt] [PATCH] xen: fix PyGrub device order using boot/@order   Jiri Denemark
• [libvirt] [PATCH] startupPolicty: Minor cleanups   Michal Privoznik
• [libvirt] [PATCH] xen: fix PyGrub device order using boot/@order   Philipp Hahn
• [libvirt] [PATCH] xen: fix PyGrub device order using boot/@order   Philipp Hahn
• [libvirt] [PATCH] xen: fix PyGrub device order using boot/@order   Jiri Denemark
• [libvirt] [PATCH v4 06/13] Add support for non-blocking calls in client RPC   Jiri Denemark
• [libvirt] [PATCH 2/2] V2 Modify generic ethernet interface so it will work when sVirt is enabled with qemu   Eric Blake
• [libvirt] building failed   Eric Blake
• [libvirt] building failed   Eric Blake
• [libvirt] building failed   Daniel P. Berrange
• [libvirt] [PATCH] python: Fix documentation of virStream recv   Matthias Bolte
• [libvirt] [PATCH] Fix URI alias prefix matching   Eric Blake
• [libvirt] [PATCH] qemu: plug memory leak   Eric Blake
• [libvirt] building failed   Eric Blake
• [libvirt] [PATCH] daemon: plug memory leak   Eric Blake
• [libvirt] [PATCH] doc: Correct the default werror policy   Eric Blake
• [libvirt] [RFC PATCH v3 3/4] qemu: pass virConnectPtr into Domain{Attach, Detach}*   Eric Blake
• [libvirt] [PATCH v4 4/4] qemu/rbd: improve rbd device specification   Eric Blake
• [libvirt] [Qemu-devel] RFC decoupling VM NIC provisioning from VM NIC connection to backend networks   Christian Benvenuti (benve)
• [libvirt] [Qemu-devel] RFC decoupling VM NIC provisioning fromVM NIC connection to backend networks   Christian Benvenuti (benve)
• [libvirt] [PATCH v4 1/2] Add VIR_TYPED_PARAM_STRING   Eric Blake
• [libvirt] [PATCH 1/2] docs: improve typed parameter documentation   Eric Blake
• [libvirt] [PATCH 2/2] qemu: allow getting < max typed parameters   Eric Blake

Last message date: Mon Oct 31 23:33:24 UTC 2011
Archived on: Sun Mar 6 13:39:58 UTC 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...