[libvirt] [PATCH 5/6] qemu: (and conf) support rombar for network devices
Laine Stump
laine at laine.org
Wed Jan 25 16:58:22 UTC 2012
When support for the rombar option was added, it was only added for
PCI passthrough devices, configured with <hostdev>. The same option is
available for any network device that is attached to the guest's PCI
bus. This patch allows setting rombar for any PCI network device type.
After adding cases to test this to qemuxml2argv-hostdev-pci-rombar.*,
I decided to rename those files (to qemuxml2argv-pci-rom.*) to more
accurately reflect the additional tests, and also noticed that up to
now we've only been performing a domainschematest for that case, so I
added the "pci-rom" test to both qemuxml2argv and qemuxml2xml (and in
the process found some bugs whose fixes I squashed into previous
commits of this series).
---
docs/formatdomain.html.in | 27 ++++++++++
docs/schemas/domaincommon.rng | 25 ++++++---
src/conf/domain_conf.c | 6 ++-
src/qemu/qemu_command.c | 54 +++++++++++++-------
.../qemuxml2argv-hostdev-pci-rombar.args | 5 --
tests/qemuxml2argvdata/qemuxml2argv-pci-rom.args | 12 ++++
...dev-pci-rombar.xml => qemuxml2argv-pci-rom.xml} | 18 +++++++
tests/qemuxml2argvtest.c | 3 +
tests/qemuxml2xmltest.c | 1 +
9 files changed, 116 insertions(+), 35 deletions(-)
delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-rombar.args
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pci-rom.args
rename tests/qemuxml2argvdata/{qemuxml2argv-hostdev-pci-rombar.xml => qemuxml2argv-pci-rom.xml} (57%)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index dfb010d..85cdbea 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -1951,6 +1951,7 @@
<mac address='00:16:3e:5d:c7:9e'/>
<script path='vif-bridge'/>
<boot order='1'/>
+ <rom bar='off'/>
</interface>
</devices>
...</pre>
@@ -2479,6 +2480,32 @@ qemu-kvm -net nic,model=? /dev/null
<span class="since">Since 0.8.8</span>
</p>
+ <h5><a name="elementsNICSROM">Interface ROM BIOS configuration</a></h5>
+
+<pre>
+ ...
+ <devices>
+ <interface type='network'>
+ <source network='default'/>
+ <target dev='vnet1'/>
+ <b><rom bar='off'/></b>
+ </interface>
+ </devices>
+ ...</pre>
+
+ <p>
+ For hypervisors which support this, you can change how a PCI Network
+ device's ROM is presented to the guest. The <code>bar</code>
+ attribute can be set to "on" or "off", and determines whether
+ or not the device's ROM will be visible in the guest's memory
+ map. (In PCI documentation, the "rombar" setting controls the
+ presence of the Base Address Register for the ROM). If no rom
+ bar is specified, the qemu default will be used (older
+ versions of qemu used a default of "off", while newer qemus
+ have a default of "on"). <span class="since">Since
+ 0.9.10 (QEMU and KVM only)</span>
+ </p>
+
<h5><a name="elementQoS">Quality of service</a></h5>
<pre>
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index 4fa968d..6bef645 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -1490,6 +1490,9 @@
<ref name="deviceBoot"/>
</optional>
<optional>
+ <ref name="rom"/>
+ </optional>
+ <optional>
<ref name="bandwidth"/>
</optional>
</interleave>
@@ -2347,15 +2350,7 @@
<ref name="address"/>
</optional>
<optional>
- <element name="rom">
- <attribute name="bar">
- <choice>
- <value>on</value>
- <value>off</value>
- </choice>
- </attribute>
- <empty/>
- </element>
+ <ref name="rom"/>
</optional>
</element>
</define>
@@ -2815,6 +2810,18 @@
</element>
</define>
+ <define name="rom">
+ <element name="rom">
+ <attribute name="bar">
+ <choice>
+ <value>on</value>
+ <value>off</value>
+ </choice>
+ </attribute>
+ <empty/>
+ </element>
+ </define>
+
<define name="usbmaster">
<element name="master">
<attribute name="startport">
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 9723d95..0799c5e 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -3875,7 +3875,8 @@ virDomainNetDefParseXML(virCapsPtr caps,
def->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI;
} else {
if (virDomainDeviceInfoParseXML(node, bootMap, &def->info,
- flags | VIR_DOMAIN_XML_INTERNAL_ALLOW_BOOT) < 0)
+ flags | VIR_DOMAIN_XML_INTERNAL_ALLOW_BOOT
+ | VIR_DOMAIN_XML_INTERNAL_ALLOW_ROM) < 0)
goto error;
}
@@ -10505,7 +10506,8 @@ virDomainNetDefFormat(virBufferPtr buf,
virBufferAdjustIndent(buf, -6);
if (virDomainDeviceInfoFormat(buf, &def->info,
- flags | VIR_DOMAIN_XML_INTERNAL_ALLOW_BOOT) < 0)
+ flags | VIR_DOMAIN_XML_INTERNAL_ALLOW_BOOT
+ | VIR_DOMAIN_XML_INTERNAL_ALLOW_ROM) < 0)
return -1;
virBufferAddLit(buf, " </interface>\n");
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index fd170bf..3fcd4b1 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -1515,6 +1515,37 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
}
static int
+qemuBuildRomStr(virBufferPtr buf,
+ virDomainDeviceInfoPtr info,
+ virBitmapPtr qemuCaps)
+{
+ if (info->rombar) {
+ if (info->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ "%s", _("rombar is supported only for PCI devices"));
+ return -1;
+ }
+ if (!qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_ROMBAR)) {
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ "%s", _("rombar not supported in this QEMU binary"));
+ return -1;
+ }
+
+ switch (info->rombar) {
+ case VIR_DOMAIN_PCI_ROMBAR_OFF:
+ virBufferAddLit(buf, ",rombar=0");
+ break;
+ case VIR_DOMAIN_PCI_ROMBAR_ON:
+ virBufferAddLit(buf, ",rombar=1");
+ break;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+static int
qemuBuildIoEventFdStr(virBufferPtr buf,
enum virDomainIoEventFd use,
virBitmapPtr qemuCaps)
@@ -2502,6 +2533,8 @@ qemuBuildNicDevStr(virDomainNetDefPtr net,
net->mac[4], net->mac[5]);
if (qemuBuildDeviceAddressStr(&buf, &net->info, qemuCaps) < 0)
goto error;
+ if (qemuBuildRomStr(&buf, &net->info, qemuCaps) < 0)
+ goto error;
if (bootindex && qemuCapsGet(qemuCaps, QEMU_CAPS_BOOTINDEX))
virBufferAsprintf(&buf, ",bootindex=%d", bootindex);
@@ -2853,25 +2886,8 @@ qemuBuildPCIHostdevDevStr(virDomainHostdevDefPtr dev, const char *configfd,
virBufferAsprintf(&buf, ",bootindex=%d", dev->info.bootIndex);
if (qemuBuildDeviceAddressStr(&buf, &dev->info, qemuCaps) < 0)
goto error;
-
- if (dev->info.rombar) {
- if (!qemuCapsGet(qemuCaps, QEMU_CAPS_PCI_ROMBAR)) {
- qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- "%s", _("rombar not supported in this QEMU binary"));
- goto error;
- }
-
- switch (dev->info.rombar) {
- case VIR_DOMAIN_PCI_ROMBAR_OFF:
- virBufferAddLit(&buf, ",rombar=0");
- break;
- case VIR_DOMAIN_PCI_ROMBAR_ON:
- virBufferAddLit(&buf, ",rombar=1");
- break;
- default:
- break;
- }
- }
+ if (qemuBuildRomStr(&buf, &dev->info, qemuCaps) < 0)
+ goto error;
if (virBufferError(&buf)) {
virReportOOMError();
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-rombar.args b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-rombar.args
deleted file mode 100644
index 1a8b14e..0000000
--- a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-rombar.args
+++ /dev/null
@@ -1,5 +0,0 @@
-LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M \
-pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -monitor \
-unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -hda \
-/dev/HostVG/QEMUGuest2 -usb -device pci-assign,host=06:12.5,id=hostdev0,\
-bus=pci.0,addr=0x3,rombar=0 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-pci-rom.args b/tests/qemuxml2argvdata/qemuxml2argv-pci-rom.args
new file mode 100644
index 0000000..11e0f0f
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-pci-rom.args
@@ -0,0 +1,12 @@
+LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M \
+pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -monitor \
+unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -hda \
+/dev/HostVG/QEMUGuest2 \
+-device virtio-net-pci,vlan=0,id=net0,mac=52:54:00:24:a5:9f,bus=pci.0,addr=0x3,rombar=1 \
+-net user,vlan=0,name=hostnet0 \
+-device virtio-net-pci,vlan=1,id=net1,mac=52:54:00:24:a5:9e,bus=pci.0,addr=0x4,\
+romfile=/etc/fake/bootrom.bin -net user,vlan=1,name=hostnet1 \
+-usb -device pci-assign,host=06:12.5,id=hostdev0,bus=pci.0,addr=0x5,rombar=0 \
+-device pci-assign,host=06:12.6,id=hostdev1,bus=pci.0,addr=0x6,rombar=1,\
+romfile=/etc/fake/bootrom.bin \
+-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x7
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-rombar.xml b/tests/qemuxml2argvdata/qemuxml2argv-pci-rom.xml
similarity index 57%
rename from tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-rombar.xml
rename to tests/qemuxml2argvdata/qemuxml2argv-pci-rom.xml
index bf17cc4..731a69d 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-rombar.xml
+++ b/tests/qemuxml2argvdata/qemuxml2argv-pci-rom.xml
@@ -17,13 +17,31 @@
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest2'/>
<target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' unit='0'/>
</disk>
+ <controller type='ide' index='0'/>
+ <interface type='user'>
+ <mac address='52:54:00:24:a5:9f'/>
+ <model type='virtio'/>
+ <rom bar='on'/>
+ </interface>
+ <interface type='user'>
+ <mac address='52:54:00:24:a5:9e'/>
+ <model type='virtio'/>
+ <rom file='/etc/fake/bootrom.bin'/>
+ </interface>
<hostdev mode='subsystem' type='pci' managed='yes'>
<source>
<address domain='0x0000' bus='0x06' slot='0x12' function='0x5'/>
</source>
<rom bar='off'/>
</hostdev>
+ <hostdev mode='subsystem' type='pci' managed='yes'>
+ <source>
+ <address domain='0x0000' bus='0x06' slot='0x12' function='0x6'/>
+ </source>
+ <rom bar='on' file='/etc/fake/bootrom.bin'/>
+ </hostdev>
<memballoon model='virtio'/>
</devices>
</domain>
diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c
index d40b37e..3fabb66 100644
--- a/tests/qemuxml2argvtest.c
+++ b/tests/qemuxml2argvtest.c
@@ -660,6 +660,9 @@ mymain(void)
DO_TEST("hostdev-pci-address", false, QEMU_CAPS_PCIDEVICE);
DO_TEST("hostdev-pci-address-device", false,
QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG);
+ DO_TEST("pci-rom", false,
+ QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG,
+ QEMU_CAPS_PCI_ROMBAR);
DO_TEST_FULL("restore-v1", "stdio", 7, false, false,
QEMU_CAPS_MIGRATE_KVM_STDIO);
diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c
index df317fd..3b6e6ea 100644
--- a/tests/qemuxml2xmltest.c
+++ b/tests/qemuxml2xmltest.c
@@ -181,6 +181,7 @@ mymain(void)
DO_TEST("hostdev-usb-address");
DO_TEST("hostdev-pci-address");
+ DO_TEST("pci-rom");
DO_TEST("encrypted-disk");
DO_TEST("memtune");
--
1.7.7.5
More information about the libvir-list
mailing list