[libvirt] how to enable ceph-rbd in libvirt.
libvirt at 163.com
libvirt at 163.com
Sat Oct 13 17:49:32 UTC 2012
hahha, you are right. my qemu-kvm is installed from yum.repo ,not compiled by me.
i always think qemu-kvm and qemu-system-x86_64 are not the same thing. actully they are the same thing.
i replace /usr/libexec/qemu-kvm with my qemu-system-x86_64,now it works.
i have a question.
what the difference between qemu.git and qemu-kvm.git?
any one is ok for kvm?
thanks.
At 2012-10-13 17:31:25,"Josh Durgin" <josh.durgin at inktank.com> wrote:
>It sounds like the qemu binary that libvirt is using isn't one
>compiled with rbd support. You can check by running:
>
>qemu-kvm -drive format=?
>
>rbd should appear in the list of supported formats.
>
>Josh
>
>On 10/13/2012 01:20 AM, yue wrote:
>> i try your proposal. but there are no any output in qemu-rbd.log. selinux has been disabled(then reboot my OS).
>> i do not know apparmor. my OS has no rpm of apparmor.
>> my os is centps-6.2. 2.6.32-220.el6.x86_64.
>> 1.would you give me the options of libvirt configure. i rebuild it.
>> 2.if there a other way to confirm whether libvirt support rbd.other way to find root cause.
>>
>> thanks.
>>
>> ----rbd disk----
>> <disk type='network' device='disk'>
>> <driver name='qemu' type='raw' cache='writethrough' io='native'/>
>> <auth username='admin'>
>> <secret type='ceph' uuid='7a91dc24-b072-43c4-98fb-4b2415322b0f'/>
>> </auth>
>> <source protocol='rbd' name='cloud/testrbd:debug_ms=1:debug_rbd=20:debug_monc=20:debug_auth=20:log_file=/tmp/qemu-rbd.log'>
>> <host name='192.168.10.4' port='6789'/>
>> </source>
>> <target dev='vda' bus='virtio'/>
>> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
>> </disk>
>> --------------------
>>
>>
>>
>>
>>
>> At 2012-10-12 15:06:45,"Josh Durgin" <josh.durgin at inktank.com> wrote:
>>> Sorry, I forgot libvirt/qemu eats stderr. The extra logging wasn't
>>> captured.
>>>
>>> Could you try:
>>>
>>> name='cloud/testrbd:debug_ms=1:debug_rbd=20:debug_monc=10:log_file=/tmp/qemu-rbd.log'
>>>
>>> If /tmp/qemu-rbd.log isn't full of debug messages, make sure selinux or
>>> apparmor aren't preventing
>>> qemu from writing to it.
>>>
>>> Josh
>>>
>>> On 2012-10-11 22:31, yue wrote:
>>>> hi, i add debug options related to rbd in xpSP3.xml. but error seems
>>>> same with privious.
>>>> ----libvirtd.log------------------
>>>> erfaces
>>>> 2012-10-12 13:25:28.267+0000: 9023: error : virNodeNumOfDevices:13984
>>>> : this function is not supported by the connection driver:
>>>> virNodeNumOfDevices
>>>> 2012-10-12 13:25:29.264+0000: 9025: error :
>>>> virConnectNumOfInterfaces:11014 : this function is not supported by
>>>> the connection driver: virConnectNumOfInterfaces
>>>> 2012-10-12 13:25:29.266+0000: 9023: error :
>>>> virConnectNumOfDefinedInterfaces:11098 : this function is not
>>>> supported by the connection driver: virConnectNumOfDefinedInterfaces
>>>> 2012-10-12 13:25:29.267+0000: 9022: error : virNodeNumOfDevices:13984
>>>> : this function is not supported by the connection driver:
>>>> virNodeNumOfDevices
>>>> 2012-10-12 13:25:30.264+0000: 9025: error :
>>>> virConnectNumOfInterfaces:11014 : this f unction is not supported by
>>>> the connection driver: virConnectNumOfInterfaces
>>>> 2012-10-12 13:25:30.267+0000: 9023: error :
>>>> virConnectNumOfDefinedInterfaces:11098 : this function is not
>>>> supported by the connection driver: virConnectNumOfDefinedInterfaces
>>>> 2012-10-12 13:25:30.269+0000: 9022: error : virNodeNumOfDevices:13984
>>>> : this function is not supported by the connection driver:
>>>> virNodeNumOfDevices
>>>> 2012-10-12 13:25:30.523+0000: 9021: warning : qemuDomainObjTaint:1364
>>>> : Domain id=1 name='xpSP3' uuid=b45bd66a-6700-4905-c5f4-4c799413d7b7
>>>> is tainted: high-privileges
>>>> 2012-10-12 13:25:30.943+0000: 9021: error : qemuMonitorOpenUnix:293 :
>>>> failed to connect to monitor socket: No such process
>>>> 2012-10-12 13:25:30.943+0000: 9021: info : qemuConnectMonitor:1247 :
>>>> Failed to connect monitor for xpSP3
>>>> 2012-10-12 13:25:30.943+0000: 9021: error :
>>>> qemuProcessWaitForMonitor:1634 : internal error process exited while
>>>> connecting to monitor: char device redirected to /dev/pts/4
>>>> qemu-kvm: -drive
>>>>
>>>> file=rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk0,format=raw,cache=writethrough,aio=native:
>>>> could not open disk image
>>>>
>>>> rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789:
>>>> No such file or directory
>>>>
>>>> ---------xpSP3.log---is attached.---
>>>> 2012-10-12 13:11:33.133+0000: starting up
>>>> LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin HOME=/root USER=root
>>>> LOGNAME=root QEMU_AUDIO_DRV=none /usr/libexec/qemu-kvm -name xpSP3 -S
>>>> -M rhel6.2.0 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1
>>>> -uuid b45bd66a-6700-4905-c5f4-4c799413d7b7 -nodefconfig -nodefaults
>>>> -chardev socket,id=charmonitor,path=/var/lib/libvirt/
>>>> qemu/xpSP3.monitor,server,nowait -mon
>>>> chardev=charmonitor,id=monitor,mode=readline -rtc
>>>> base=localtime,driftfix=slew -device
>>>> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive
>>>>
>>>> file=/var/lib/libvirt/images/xpSP3.img,if=none,id=drive-ide0-0-0,format=raw,cache=none
>>>> -device
>>>>
>>>> ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1
>>>> -drive
>>>>
>>>> file=rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk0,format=raw,cache=writethrough,aio=native
>>>> -device
>>>>
>>>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk0,id=virtio-disk0
>>>> -netdev tap,fd=19,id=hostnet0 -device
>>>>
>>>> e1000,netdev=hostnet0,id=net0,mac=52:54:00:2a:8c:48,bus=pci.0,addr=0x3
>>>> -chardev pty,id=charserial0 -device
>>>> isa-serial,chardev=charserial0,id=serial0 -device
>>>> usb-tablet,id=input0
>>>> -vnc 0.0.0.0:0 -vga std -device
>>>> intel-hda,id=sound0,bus=pci.0,addr=0x4
>>>> -device hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -device
>>>> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
>>>> Domain id=1 is tainted: high-privileges
>>>> 2012-10-12 13:11:33.144+0000: 7815: debug : virFileClose:72 : Closed
>>>> fd 18
>>>> 2012-10-12 13:11:33.145+0000: 7815: debug : virFileClose:72 : Closed
>>>> fd 24
>>>> 2012-10-12 13:11:33.145+0000: 7815: debug : virFileClose:72 : Closed
>>>> fd 3
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virCommandHook:2058 : Run
>>>> hook 0x7faa10a62030 0x7faa160d4370
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug : qemuProcessHook:2589 :
>>>> Obtaining domain lock
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virDomainLockProcessStart:164 : plugin=0x7faa080020a0
>>>> dom=0x7faa0804af40 paused=1 fd=0x7faa160d3998
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virDomainLockManagerNew:123 : plugin=0x7faa080020a0
>>>> dom=0x7faa0804af40
>>>> withResources=1
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virLockManagerPluginGetDriver:280 : plugin=0x7faa080020a0
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virLockManagerNew:304 :
>>>> driver=0x3712e9cb20 type=0 nparams=4 params=0x7faa160d3830 flags=0
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virLockManagerLogParams:104 : key=uuid type=uuid
>>>> value=b45bd66a-6700-4905-c5f4-4c799413d7b7
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virLockManagerLogParams:100 : key=name type=string value=xpSP3
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virLockManagerLogParams:88 : key=id type=uint value=1
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virLockManagerLogParams:88 : key=pid type=uint value=7818
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virDomainLockManagerNew:135 : Adding leases
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virDomainLockManagerNew:140 : Adding disks
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug :
>>>> virDomainLockManagerAddDisk:86 : Add disk
>>>> /var/lib/libvirt/images/xpSP3.img
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virLockMan
>>>> agerAddResource:333 : lock=0x7faa08060820 type=0
>>>> name=/var/lib/libvirt/images/xpSP3.img nparams=0 params=(nil) flags=0
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virLockManagerAcquire:350
>>>> : lock=0x7faa08060820 state='(null)' flags=3 fd=0x7faa160d3998
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virLockManagerFree:387 :
>>>> lock=0x7faa08060820
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug : qemuProcessHook:2614 :
>>>> Moving process to cgroup
>>>> 2012-10-12 13:11:33.146+0000: 7818: debug : virCgroupNew:617 : New
>>>> group /libvirt/qemu/xpSP3
>>>> 2012-10-12 13:11:33.151+0000: 7818: debug : virCgroupDetect:273 :
>>>> Detected mount/mapping 0:cpu at /cgroup/cpu in
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 :
>>>> Detected mount/mapping 1:cpuacct at /cgroup/cpuacct in
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 :
>>>> Detected mount/mapping 2:cpuset at /cgroup/cpuset in
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 :
>>>> Detected mount/ma pping 3:memory at /cgroup/memory in
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 :
>>>> Detected mount/mapping 4:devices at /cgroup/devices in
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 :
>>>> Detected mount/mapping 5:freezer at /cgroup/freezer in
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupDetect:273 :
>>>> Detected mount/mapping 6:blkio at /cgroup/blkio in
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:535 :
>>>> Make group /libvirt/qemu/xpSP3
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 :
>>>> Make controller /cgroup/cpu/libvirt/qemu/xpSP3/
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 :
>>>> Make controller /cgroup/cpuacct/libvirt/qemu/xpSP3/
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 :
>>>> Make controller /cgroup/cpuset/libvirt/qemu/xpSP3/
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 :
>>>> Make controller /cgroup/memory/libvirt/ qemu/xpSP3/
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 :
>>>> Make controller /cgroup/devices/libvirt/qemu/xpSP3/
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 :
>>>> Make controller /cgroup/freezer/libvirt/qemu/xpSP3/
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupMakeGroup:560 :
>>>> Make controller /cgroup/blkio/libvirt/qemu/xpSP3/
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331
>>>> : Set value '/cgroup/cpu/libvirt/qemu/xpSP3/tasks' to '7818'
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed
>>>> fd 3
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331
>>>> : Set value '/cgroup/cpuacct/libvirt/qemu/xpSP3/tasks' to '7818'
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed
>>>> fd 3
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331
>>>> : Set value '/cgroup/cpuset/libvirt/qemu/xpSP3/tasks' to '7818'
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed
>>>> fd 3
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331
>>>> : Set value '/cgroup/memory/libvirt/qemu/xpSP3/tasks' to '7818'
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed
>>>> fd 3
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331
>>>> : Set value '/cgroup/devices/libvirt/qemu/xpSP3/tasks' to '7818'
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed
>>>> fd 3
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331
>>>> : Set value '/cgroup/freezer/libvirt/qemu/xpSP3/tasks' to '7818'
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed
>>>> fd 3
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virCgroupSetValueStr:331
>>>> : Set value '/cgroup/blkio/libvirt/qemu/xpSP3/tasks' to '7818'
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : virFileClose:72 : Closed
>>>> fd 3
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug :
>>>> qemuProcessInitCpuAffinity:1848 : Setting CPU affinity
>>>> 2 012-10-12 13:11:33.156+0000: 7818: debug :
>>>> qemuProcessInitCpuAffinity:1883 : Set CPU affinity with specified
>>>> cpuset
>>>> 2012-10-12 13:11:33.156+0000: 7818: debug : qemuProcessHook:2626 :
>>>> Setting up security labelling
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virGetUserIDByName:2539 :
>>>> User record for user '0' does not exist
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virGetGroupIDByName:2621
>>>> : Group record for group '0' does not exist
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug :
>>>> virSecurityDACSetProcessLabel:861 : Dropping privileges of DEF to 0:0
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug : qemuProcessHook:2633 :
>>>> Hook complete ret=0
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virCommandHook:2060 :
>>>> Done hook 0
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virCommandHook:2074 :
>>>> Notifying parent for handshake start on 21
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virCommandHook:2098 :
>>>> Waiting on parent for handshake complete on 22
>>>> 2012-10-12 13:11:33.157+0 000: 7818: debug : virFileClose:72 : Closed
>>>> fd 21
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virFileClose:72 : Closed
>>>> fd 22
>>>> 2012-10-12 13:11:33.157+0000: 7818: debug : virCommandHook:2119 :
>>>> Hook is done 0
>>>> char device redirected to /dev/pts/4
>>>> qemu-kvm: -drive
>>>>
>>>> file=rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk0,format=raw,cache=writethrough,aio=native:
>>>> could not open disk image
>>>>
>>>> rbd:cloud/testrbd:debug_rbd=20:debug_monc=20:debug_auth=20:log_to_stderr=2:id=admin:key=AQCp1GFQMMOrCxAAEb4jxgUF9BuSBkQIigFi/Q==:auth_supported=cephx;none:mon_host=192.168.10.4:6789:
>>>> No such file or directory
>>>> 2012-10-12 13:11:33.557+0000: shutting down
>>>>
>>>> ----
>>>>
>>>> At 2012-10-12 00:04:19,"Josh Durgi
>>>> n" <josh.durgin at inktank.com> wrote:
>>>>> On 10/11/2012 12:00 AM, yue wrote:
>>>>>> how should i do? i configurate guest-os.xml ,add rbd disk manually.
>>>>>> then virsh start xpSP3
>>>>>
>>>>> That's the right way to do it.
>>>>>
>>>>>> -------rbd disk------------
>>>>>> <disk type='network' device='disk'>
>>>>>> <driver name='qemu' type='raw' cache='writethrough' io='native'/>
>>>>>> <auth username='cloud'>
>>>>>> <secret type='ceph' uuid='7a91dc24-b072-43c4-98fb-4b2415322b0f'/>
>>>>>> </auth>
>>>>>> <source protocol='rbd' name='cloud/testrbd'>
>>>>>> <host name='192.168.10.4' port='6789'/>
>>>>>> </source>
>>>>>> <target dev='vdb' bus='virtio'/>
>>>>>> <address type='pci' domain='0x0000' bus='0x00' slot='0x06'
>>>>>> function='0x0'/>
>>>>>> </disk>
>>>>>> ---error log---
>>>>>>
>>>>>> [root at KVM-ip11 git]# virsh start xpSP3
>>>>>> error: Failed to start domain xpSP3
>>>>>> error: internal error process exited while connecting to monitor:
>>>>>> char device redirected to /dev/pts/4
>>>>>> qemu-kvm: -drive
>>>>>> file=rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk1,format=raw,cache=writethrough,aio=native:
>>>>>> could not open disk image
>>>>>> rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789:
>>>>>> No such file or directory
>>>>>> ---xpSP3.log-----
>>>>>> 2012-10-11 14:57:58.118+0000: starting up
>>>>>> LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin HOME=/root USER=root
>>>>>> LOGNAME=root QEMU_AUDIO_DRV=none /usr/libexec/qemu-kvm -name xpSP3 -S
>>>>>> -M rhel6.2.0 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1
>>>>>> -uuid b45bd66a-6700-4905-c5f4-4c799413d7b7 -nodefconfig -nodefaults
>>>>>> -chardev
>>>>>> socket,id=charmonitor,path=/var/lib/libvirt/qemu/xpSP3.monitor,server,nowait
>>>>>> -mon chardev=charmonitor,id=monitor,mode=readline -rtc
>>>>>> base=localtime,driftfix=slew -device
>>>>>> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive
>>>>>> file=/var/lib/libvirt/images/xpSP3.img,if=none,id=drive-ide0-0-0,format=raw,cache=none
>>>>>> -device
>>>>>> ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1
>>>>>> -drive
>>>>>> file=rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,
>>>> if=none,id=drive-virtio-disk1,format=raw -device
>>>>
>>>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk1,id=virtio-disk1
>>>> -netdev tap,fd=19,id=hostnet0 -device e1000,netdev!
>>>>>> =hostnet0,id=net0,mac=52:54:00:2a:8c:48,bus=pci.0,addr=0x3 -chardev
>>>>>> pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0
>>>>>> -device usb-tablet,id=input0 -vnc 0.0.0.0:0 -vga std -device
>>>>>> intel-hda,id=sound0,bus=pci.0,addr=0x4 -device
>>>>>> hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -device
>>>>>> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
>>>>>> Domain id=3 is tainted: high-privileges
>>>>>> char device redirected to /dev/pts/4
>>>>>> qemu-kvm: -drive
>>>>>> file=rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789,if=none,id=drive-virtio-disk1,format=raw:
>>>>>> could not open disk image
>>>>>> rbd:cloud/testrbd:id=cloud:key=AQCGbGRQ+M+NGBAATtylZNiSxqCTQ4uaApd+9w==:auth_supported=cephx;none:mon_host=192.168.10.4:6789:
>>>>>> No such file or directory
>>>>>> 2012-10-11 14:57:58.548+0000: shutting down
>>>>>
>>>>> It's unclear where the actual problem is - could you try again with
>>>>> name='cloud/testrbd:debug_ms=1:debug_rbd=20:debug_monc=10:log_to_stderr=true'
>>>>> and post the instance log (i.e. xpSP3.log)?
>>>>>
>>>>> Josh
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> At 2012-10-11 14:48:43,"Josh Durgin" <josh.durgin at inktank.com>
>>>>>> wrote:
>>>>>>> On 10/10/2012 10:52 PM, yue wrote:
>>>>>>>> hi, now i rebuild libvirtd, version 0.10.2. and define ceph
>>>>>>>> secret
>>>>>>>> ,define ceph storage-pool. all fine up to now.
>>>>>>>> i operate guest-os through virt-manager-GUI . i add a
>>>>>>>> rbd-file(qemu-img create before) from ceph-rbd-pool, click
>>>>>>>> 'finish',it
>>>>>>>> pop error "NoneType object has no attribute startswith", someone
>>>>>>>> say it
>>>>>>>> is python error.
>>>>>>>
>>>>>>> python-virtinst (and thus virt-manager) don't support the rbd
>>>>>>> storage
>>>>>>> pool. They don't know how to configure rbd disks yet either.
>>>>>>>
>>>>>>> Josh
>>>>>
>>>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/libvir-list/attachments/20121014/94094ac7/attachment-0001.htm>
More information about the libvir-list
mailing list