[libvirt] [PATCH v2.1 09/11] qemu_migration: Implement qemuMigrationDriveMirror
Jiri Denemark
jdenemar at redhat.com
Thu Jan 17 23:15:22 UTC 2013
On Fri, Jan 11, 2013 at 17:52:21 +0100, Michal Privoznik wrote:
> This function does the source part of NBD magic.
> It invokes drive-mirror on each non shared disk
> and wait till the mirroring process completes.
> When it does we can proceed with migration.
>
> Currently, an active waiting is done: every 50ms
> libvirt asks qemu if block-job is finished or not.
> However, once the job finishes, qemu doesn't
> report its progress so we can only assume if
> the job finished successfully or not. The better
> solution would be to listen to the event which
> is sent as soon as the job finishes. The event
> does contain the result of job.
> ---
> src/qemu/qemu_migration.c | 179 +++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 178 insertions(+), 1 deletion(-)
>
> diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
> index fc410c0..1f9a880 100644
> --- a/src/qemu/qemu_migration.c
> +++ b/src/qemu/qemu_migration.c
> @@ -1175,6 +1175,177 @@ cleanup:
> return ret;
> }
>
> +/**
> + * qemuMigrationDiskMirror:
> + * @driver: qemu driver
> + * @vm: domain
> + * @mig: migration cookie
> + * @migrate_flags: migrate monitor command flags
> + *
> + * Run drive-mirror to feed NBD server running on dst and
> + * wait till the process completes. On success, update
> + * @migrate_flags so we don't tell 'migrate' command to
> + * do the very same operation.
> + *
> + * Returns 0 on success (@migrate_flags updated),
> + * -1 otherwise.
> + */
> +static int
> +qemuMigrationDriveMirror(virQEMUDriverPtr driver,
> + virDomainObjPtr vm,
> + qemuMigrationCookiePtr mig,
> + const char *host,
> + unsigned long speed,
> + unsigned int *migrate_flags)
> +{
> + int ret = -1;
> + int mon_ret;
> + qemuDomainObjPrivatePtr priv = vm->privateData;
> + size_t ndisks = 0, i;
> + char **disks = NULL;
> + unsigned int mirror_flags = VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT;
> + char *nbd_dest = NULL;
> +
> + if (*migrate_flags & QEMU_MONITOR_MIGRATE_NON_SHARED_DISK) {
> + /* dummy */
> + } else if (*migrate_flags & QEMU_MONITOR_MIGRATE_NON_SHARED_INC) {
> + mirror_flags |= VIR_DOMAIN_BLOCK_REBASE_SHALLOW;
> + } else {
> + /* Nothing to be done here. Claim success */
> + return 0;
> + }
I find this hard to read, I'd rather rewrite this as:
if (*migrate_flags & QEMU_MONITOR_MIGRATE_NON_SHARED_INC)
mirror_flags |= VIR_DOMAIN_BLOCK_REBASE_SHALLOW;
else if (!(*migrate_flags & QEMU_MONITOR_MIGRATE_NON_SHARED_DISK))
return 0;
or (even easier but redundant):
if (!(*migrate_flags & (QEMU_MONITOR_MIGRATE_NON_SHARED_DISK |
QEMU_MONITOR_MIGRATE_NON_SHARED_INC)))
return 0;
if (*migrate_flags & QEMU_MONITOR_MIGRATE_NON_SHARED_INC)
mirror_flags |= VIR_DOMAIN_BLOCK_REBASE_SHALLOW;
> +
> + for (i = 0; i < vm->def->ndisks; i++) {
> + virDomainDiskDefPtr disk = vm->def->disks[i];
> +
> + /* skip shared disks */
> + if (disk->shared)
> + continue;
> +
> + if (VIR_REALLOC_N(disks, ndisks + 1) < 0) {
> + virReportOOMError();
> + goto cleanup;
> + }
> +
> + if (virAsprintf(&disks[ndisks++], "%s%s",
> + QEMU_DRIVE_HOST_PREFIX, disk->info.alias) < 0) {
> + virReportOOMError();
> + goto cleanup;
> + }
> + }
> +
> + if (!ndisks) {
> + /* Hooray! Nothing to care about */
> + ret = 0;
> + goto cleanup;
> + }
This is just a duplicated code from qemuMigrationStartNBDServer. Should
we move it to a separate function?
> +
> + if (!mig->nbd) {
> + /* Destination doesn't support NBD server.
> + * Fall back to previous implementation.
> + * XXX Or should we report an error here? */
> + VIR_DEBUG("Destination doesn't support NBD server "
> + "Falling back to previous implementation.");
> + ret = 0;
> + goto cleanup;
> + }
Ah, this is the check I was looking for in one of the previous patches.
> +
> + for (i = 0; i < ndisks; i++) {
> + virDomainBlockJobInfo info;
> + VIR_FREE(nbd_dest);
> + if (virAsprintf(&nbd_dest, "nbd:%s:%u:exportname=%s",
> + host, mig->nbd->port, disks[i]) < 0) {
> + virReportOOMError();
> + goto error;
> + }
Hmm, looks like this is not IPv6 ready at all or does it allow
"[fec0::1]" IPv6 addresses to be passed as host?
> +
> + if (qemuDomainObjEnterMonitorAsync(driver, vm,
> + QEMU_ASYNC_JOB_MIGRATION_OUT) < 0)
> + goto error;
> + mon_ret = qemuMonitorDriveMirror(priv->mon, disks[i], nbd_dest,
> + NULL, speed, mirror_flags);
> + qemuDomainObjExitMonitorWithDriver(driver, vm);
> +
> + if (mon_ret < 0)
> + goto error;
> +
> + /* wait for completion */
> + while (true) {
> + /* Poll every 50ms for progress & to allow cancellation */
> + struct timespec ts = { .tv_sec = 0, .tv_nsec = 50 * 1000 * 1000ull };
> + if (qemuDomainObjEnterMonitorAsync(driver, vm,
> + QEMU_ASYNC_JOB_MIGRATION_OUT) < 0)
> + goto error;
> + if (priv->job.asyncAbort) {
> + /* explicitly do this *after* we entered the monitor,
> + * as this is a critical section so we are guaranteed
> + * priv->job.asyncAbort will not change */
> + qemuDomainObjExitMonitorWithDriver(driver, vm);
> + virReportError(VIR_ERR_OPERATION_ABORTED, _("%s: %s"),
> + qemuDomainAsyncJobTypeToString(priv->job.asyncJob),
> + _("canceled by client"));
> + goto cleanup;
I believe this should jump to the error label and cancel all started
block jobs.
> + }
> + mon_ret = qemuMonitorBlockJob(priv->mon, disks[i], NULL, 0,
> + &info, BLOCK_JOB_INFO, true);
> + qemuDomainObjExitMonitorWithDriver(driver, vm);
> +
> + if (mon_ret < 0) {
> + /* qemu doesn't report finished jobs */
> + VIR_WARN("Unable to query drive-mirror job status. "
> + "Stop polling on '%s' cur:%llu end:%llu",
> + disks[i], info.cur, info.end);
> + break;
Isn't this fatal? If not, I think the comment above is too short.
> + }
> +
> + if (info.cur == info.end) {
> + VIR_DEBUG("Drive mirroring of '%s' completed", disks[i]);
> + break;
> + }
> +
> + /* XXX Frankly speaking, we should listen to the events,
> + * instead of doing this. But this works for now and we
> + * are doing something similar in migration itself anyway */
Well, migration itself does not send any events. But I agree we can do
polling here and change to events at the same time we do it for
migration (if we ever get that event from qemu).
> +
> + virDomainObjUnlock(vm);
> + qemuDriverUnlock(driver);
> +
> + nanosleep(&ts, NULL);
> +
> + qemuDriverLock(driver);
> + virDomainObjLock(vm);
> +
> + }
> + }
> +
> + /* okay, copied. modify migrate_flags */
> + *migrate_flags &= ~(QEMU_MONITOR_MIGRATE_NON_SHARED_DISK |
> + QEMU_MONITOR_MIGRATE_NON_SHARED_INC);
> + ret = 0;
> +
> +cleanup:
> + for (i = 0; i < ndisks; i++)
> + VIR_FREE(disks[i]);
> + VIR_FREE(disks);
> + VIR_FREE(nbd_dest);
> + return ret;
> +
> +error:
> + /* cancel any outstanding jobs */
> + if (qemuDomainObjEnterMonitorAsync(driver, vm,
> + QEMU_ASYNC_JOB_MIGRATION_OUT) == 0) {
> + while (i) {
> + if (qemuMonitorBlockJob(priv->mon, disks[i], NULL, 0,
> + NULL, BLOCK_JOB_ABORT, true) < 0)
> + VIR_WARN("Unable to cancel block-job on '%s'", disks[i]);
> + i--;
> + }
> + qemuDomainObjExitMonitorWithDriver(driver, vm);
> + } else {
> + VIR_WARN("Unable to enter monitor. No block job cancelled");
> + }
> + goto cleanup;
> +}
>
> /* Validate whether the domain is safe to migrate. If vm is NULL,
> * then this is being run in the v2 Prepare stage on the destination
...
Jirka
More information about the libvir-list
mailing list