[libvirt] [PATCH 4/5] qemu: set/validate slot/connection type when assigning slots for PCI devices
Laine Stump
laine at laine.org
Tue Jul 23 14:44:54 UTC 2013
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
---
src/conf/domain_conf.h | 4 +-
src/libvirt_private.syms | 1 +
src/qemu/qemu_command.c | 319 +++++++++++++++++++++++++++++++++++------------
src/qemu/qemu_command.h | 26 +++-
4 files changed, 268 insertions(+), 82 deletions(-)
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index f265966..abf024c 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -766,12 +766,12 @@ enum virDomainControllerType {
};
-enum virDomainControllerModelPCI {
+typedef enum {
VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT,
VIR_DOMAIN_CONTROLLER_MODEL_PCI_BRIDGE,
VIR_DOMAIN_CONTROLLER_MODEL_PCI_LAST
-};
+} virDomainControllerModelPCI;
enum virDomainControllerModelSCSI {
VIR_DOMAIN_CONTROLLER_MODEL_SCSI_AUTO,
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index 76873ad..f0c9181 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -139,6 +139,7 @@ virDomainControllerDefFree;
virDomainControllerFind;
virDomainControllerInsert;
virDomainControllerInsertPreAlloced;
+virDomainControllerModelPCITypeToString;
virDomainControllerModelSCSITypeFromString;
virDomainControllerModelSCSITypeToString;
virDomainControllerModelUSBTypeFromString;
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 059aa6a..64787b6 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -1412,7 +1412,15 @@ cleanup:
#define QEMU_PCI_ADDRESS_FUNCTION_LAST 7
typedef struct {
- /* Each bit in a slot represents one function on that slot */
+ virDomainControllerModelPCI model;
+ /* flags an min/max can be computed from model, but
+ * having them ready makes life easier.
+ */
+ qemuDomainPCIConnectFlags flags;
+ size_t minSlot, maxSlot; /* usually 0,0 or 1,31 */
+ /* Each bit in a slot represents one function on that slot. If the
+ * bit is set, that function is in use by a device.
+ */
uint8_t slots[QEMU_PCI_ADDRESS_SLOT_LAST + 1];
} qemuDomainPCIAddressBus;
typedef qemuDomainPCIAddressBus *qemuDomainPCIAddressBusPtr;
@@ -1430,9 +1438,13 @@ struct _qemuDomainPCIAddressSet {
* Check that the PCI address is valid for use
* with the specified PCI address set.
*/
-static bool qemuPCIAddressValidate(qemuDomainPCIAddressSetPtr addrs ATTRIBUTE_UNUSED,
- virDevicePCIAddressPtr addr)
+static bool
+qemuPCIAddressValidate(qemuDomainPCIAddressSetPtr addrs ATTRIBUTE_UNUSED,
+ virDevicePCIAddressPtr addr,
+ qemuDomainPCIConnectFlags flags)
{
+ qemuDomainPCIAddressBusPtr bus;
+
if (addrs->nbuses == 0) {
virReportError(VIR_ERR_XML_ERROR, "%s", _("No PCI buses available"));
return false;
@@ -1448,32 +1460,81 @@ static bool qemuPCIAddressValidate(qemuDomainPCIAddressSetPtr addrs ATTRIBUTE_UN
addrs->nbuses - 1);
return false;
}
- if (addr->function > QEMU_PCI_ADDRESS_FUNCTION_LAST) {
+
+ bus = &addrs->buses[addr->bus];
+
+ /* assure that at least one of the requested connection types is
+ * provided by this bus
+ */
+ if (!(flags & bus->flags & QEMU_PCI_CONNECT_TYPES_MASK)) {
virReportError(VIR_ERR_XML_ERROR,
- _("Invalid PCI address: function must be <= %u"),
- QEMU_PCI_ADDRESS_FUNCTION_LAST);
+ _("Invalid PCI address: The PCI controller "
+ "providing bus %04x doesn't support "
+ "connections appropriate for the device "
+ "(%x required vs. %x provided by bus)"),
+ addr->bus, flags & QEMU_PCI_CONNECT_TYPES_MASK,
+ bus->flags & QEMU_PCI_CONNECT_TYPES_MASK);
return false;
}
- if (addr->slot > QEMU_PCI_ADDRESS_SLOT_LAST) {
+ /* make sure this bus allows hot-plug if the caller demands it */
+ if ((flags & QEMU_PCI_CONNECT_HOTPLUGGABLE) &&
+ !(bus->flags & QEMU_PCI_CONNECT_HOTPLUGGABLE)) {
virReportError(VIR_ERR_XML_ERROR,
- _("Invalid PCI address: slot must be <= %u"),
- QEMU_PCI_ADDRESS_SLOT_LAST);
+ _("Invalid PCI address: hot-pluggable slot requested, "
+ "but bus %04x doesn't support hot-plug"), addr->bus);
return false;
}
- if (addr->slot == 0) {
- if (addr->bus) {
- virReportError(VIR_ERR_XML_ERROR, "%s",
- _("Slot 0 is unusable on PCI bridges"));
- } else {
- virReportError(VIR_ERR_XML_ERROR, "%s",
- _("Slot 0 on bus 0 is reserved for the host bridge"));
- }
+ /* some "buses" are really just a single port */
+ if (bus->minSlot && addr->slot < bus->minSlot) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("Invalid PCI address: slot must be >= %zu"),
+ bus->minSlot);
+ return false;
+ }
+ if (addr->slot > bus->maxSlot) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("Invalid PCI address: slot must be <= %zu"),
+ bus->maxSlot);
+ return false;
+ }
+ if (addr->function > QEMU_PCI_ADDRESS_FUNCTION_LAST) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("Invalid PCI address: function must be <= %u"),
+ QEMU_PCI_ADDRESS_FUNCTION_LAST);
return false;
}
return true;
}
+
+static int
+qemuDomainPCIAddressBusSetModel(qemuDomainPCIAddressBusPtr bus,
+ virDomainControllerModelPCI model)
+{
+ switch (model) {
+ case VIR_DOMAIN_CONTROLLER_MODEL_PCI_BRIDGE:
+ case VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT:
+ bus->flags = (QEMU_PCI_CONNECT_HOTPLUGGABLE |
+ QEMU_PCI_CONNECT_TYPE_PCI);
+ bus->minSlot = 1;
+ bus->maxSlot = QEMU_PCI_ADDRESS_SLOT_LAST;
+ break;
+ default:
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Invalid PCI controller model %d"), model);
+ return -1;
+ }
+
+ bus->model = model;
+ return 0;
+}
+
+
/* Ensure addr fits in the address set, by expanding it if needed.
+ * This will only grow if the flags say that we need a normal
+ * hot-pluggable PCI slot. If we need a different type of slot, it
+ * will fail.
+ *
* Return value:
* -1 = OOM
* 0 = no action performed
@@ -1481,7 +1542,8 @@ static bool qemuPCIAddressValidate(qemuDomainPCIAddressSetPtr addrs ATTRIBUTE_UN
*/
static int
qemuDomainPCIAddressSetGrow(qemuDomainPCIAddressSetPtr addrs,
- virDevicePCIAddressPtr addr)
+ virDevicePCIAddressPtr addr,
+ qemuDomainPCIConnectFlags flags)
{
int add;
size_t i;
@@ -1490,16 +1552,33 @@ qemuDomainPCIAddressSetGrow(qemuDomainPCIAddressSetPtr addrs,
i = addrs->nbuses;
if (add <= 0)
return 0;
+
+ /* auto-grow only works when we're adding plain PCI devices */
+ if (!(flags & QEMU_PCI_CONNECT_TYPE_PCI)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("Cannot automatically add a new PCI bus for a "
+ "device requiring a slot other than standard PCI."));
+ return -1;
+ }
+
if (VIR_EXPAND_N(addrs->buses, addrs->nbuses, add) < 0)
return -1;
- /* reserve slot 0 on the new buses */
- for (; i < addrs->nbuses; i++)
- addrs->buses[i].slots[0] = 0xFF;
+
+ for (; i < addrs->nbuses; i++) {
+ /* Any time we auto-add a bus, we will want a multi-slot
+ * bus. Currently the only type of bus we will auto-add is a
+ * pci-bridge, which is hot-pluggable and provides standard
+ * PCI slots.
+ */
+ qemuDomainPCIAddressBusSetModel(&addrs->buses[i],
+ VIR_DOMAIN_CONTROLLER_MODEL_PCI_BRIDGE);
+ }
return add;
}
-static char *qemuPCIAddressAsString(virDevicePCIAddressPtr addr)
+static char *
+qemuPCIAddressAsString(virDevicePCIAddressPtr addr)
{
char *str;
@@ -1512,15 +1591,19 @@ static char *qemuPCIAddressAsString(virDevicePCIAddressPtr addr)
}
-static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
- virDomainDeviceDefPtr device,
- virDomainDeviceInfoPtr info,
- void *opaque)
+static int
+qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
+ virDomainDeviceDefPtr device,
+ virDomainDeviceInfoPtr info,
+ void *opaque)
{
int ret = -1;
char *str = NULL;
virDevicePCIAddressPtr addr = &info->addr.pci;
qemuDomainPCIAddressSetPtr addrs = opaque;
+ /* FIXME: flags should be set according to the requirements of @device */
+ qemuDomainPCIConnectFlags flags = (QEMU_PCI_CONNECT_HOTPLUGGABLE |
+ QEMU_PCI_CONNECT_TYPE_PCI);
if ((info->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI)
|| ((device->type == VIR_DOMAIN_DEVICE_HOSTDEV) &&
@@ -1538,6 +1621,11 @@ static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
*
* If the machine does have a PCI bus, they will get reserved
* in qemuAssignDevicePCISlots().
+ *
+ * FIXME: When we have support for a pcie-root controller at bus
+ * 0, we will no longer be able to skip checking of these devices,
+ * as they are PCI, and thus can't be connected to bus 0 if it is
+ * PCIe rather than PCI.
*/
if (device->type == VIR_DOMAIN_DEVICE_CONTROLLER && addr->domain == 0 &&
addr->bus == 0 && addr->slot == 1) {
@@ -1551,15 +1639,22 @@ static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
return 0;
}
- if (addrs->dryRun && qemuDomainPCIAddressSetGrow(addrs, addr) < 0)
+ /* add an additional bus of the correct type if needed */
+ if (addrs->dryRun &&
+ qemuDomainPCIAddressSetGrow(addrs, addr, flags) < 0)
return -1;
- if (!qemuPCIAddressValidate(addrs, addr))
+ /* verify that the address is in bounds for the chosen bus, and
+ * that the bus is of the correct type for the device (via
+ * comparing the flags).
+ */
+ if (!qemuPCIAddressValidate(addrs, addr, flags))
return -1;
if (!(str = qemuPCIAddressAsString(addr)))
goto cleanup;
+ /* check if already in use */
if (addrs->buses[addr->bus].slots[addr->slot] & (1 << addr->function)) {
if (info->addr.pci.function != 0) {
virReportError(VIR_ERR_XML_ERROR,
@@ -1573,6 +1668,7 @@ static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
goto cleanup;
}
+ /* mark as in use */
if ((info->addr.pci.function == 0) &&
(info->addr.pci.multi != VIR_DEVICE_ADDRESS_PCI_MULTI_ON)) {
/* a function 0 w/o multifunction=on must reserve the entire slot */
@@ -1611,6 +1707,8 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
int nbuses = 0;
size_t i;
int rv;
+ qemuDomainPCIConnectFlags flags = (QEMU_PCI_CONNECT_HOTPLUGGABLE |
+ QEMU_PCI_CONNECT_TYPE_PCI);
for (i = 0; i < def->ncontrollers; i++) {
if (def->controllers[i]->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI) {
@@ -1624,22 +1722,25 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
if (nbuses > 0 &&
virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_PCI_BRIDGE)) {
virDomainDeviceInfo info;
+
/* 1st pass to figure out how many PCI bridges we need */
if (!(addrs = qemuDomainPCIAddressSetCreate(def, nbuses, true)))
goto cleanup;
if (qemuAssignDevicePCISlots(def, qemuCaps, addrs) < 0)
goto cleanup;
/* Reserve 1 extra slot for a (potential) bridge */
- if (qemuDomainPCIAddressSetNextAddr(addrs, &info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &info, flags) < 0)
goto cleanup;
for (i = 1; i < addrs->nbuses; i++) {
+ qemuDomainPCIAddressBusPtr bus = &addrs->buses[i];
+
if ((rv = virDomainDefMaybeAddController(
- def, VIR_DOMAIN_CONTROLLER_TYPE_PCI,
- i, VIR_DOMAIN_CONTROLLER_MODEL_PCI_BRIDGE)) < 0)
+ def, VIR_DOMAIN_CONTROLLER_TYPE_PCI,
+ i, bus->model)) < 0)
goto cleanup;
/* If we added a new bridge, we will need one more address */
- if (rv > 0 && qemuDomainPCIAddressSetNextAddr(addrs, &info) < 0)
+ if (rv > 0 && qemuDomainPCIAddressSetNextAddr(addrs, &info, flags) < 0)
goto cleanup;
}
nbuses = addrs->nbuses;
@@ -1698,9 +1799,11 @@ int qemuDomainAssignAddresses(virDomainDefPtr def,
return qemuDomainAssignPCIAddresses(def, qemuCaps, obj);
}
-qemuDomainPCIAddressSetPtr qemuDomainPCIAddressSetCreate(virDomainDefPtr def,
- unsigned int nbuses,
- bool dryRun)
+
+qemuDomainPCIAddressSetPtr
+qemuDomainPCIAddressSetCreate(virDomainDefPtr def,
+ unsigned int nbuses,
+ bool dryRun)
{
qemuDomainPCIAddressSetPtr addrs;
size_t i;
@@ -1714,10 +1817,38 @@ qemuDomainPCIAddressSetPtr qemuDomainPCIAddressSetCreate(virDomainDefPtr def,
addrs->nbuses = nbuses;
addrs->dryRun = dryRun;
- /* reserve slot 0 in every bus - it's used by the host bridge on bus 0
- * and unusable on PCI bridges */
- for (i = 0; i < nbuses; i++)
- addrs->buses[i].slots[0] = 0xFF;
+ /* As a safety measure, set default model='pci-root' for first pci
+ * controller and 'pci-bridge' for all subsequent. After setting
+ * those defaults, then scan the config and set the actual model
+ * for all addrs[idx]->bus that already have a corresponding
+ * controller in the config.
+ *
+ */
+ if (nbuses > 0)
+ qemuDomainPCIAddressBusSetModel(&addrs->buses[0],
+ VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT);
+ for (i = 1; i < nbuses; i++) {
+ qemuDomainPCIAddressBusSetModel(&addrs->buses[i],
+ VIR_DOMAIN_CONTROLLER_MODEL_PCI_BRIDGE);
+ }
+
+ for (i = 0; i < def->ncontrollers; i++) {
+ size_t idx = def->controllers[i]->idx;
+
+ if (def->controllers[i]->type != VIR_DOMAIN_CONTROLLER_TYPE_PCI)
+ continue;
+
+ if (idx >= addrs->nbuses) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Inappropriate new pci controller index %zu"
+ "not found in addrs"), idx);
+ goto error;
+ }
+
+ if (qemuDomainPCIAddressBusSetModel(&addrs->buses[idx],
+ def->controllers[i]->model) < 0)
+ goto error;
+ }
if (virDomainDeviceInfoIterate(def, qemuCollectPCIAddress, addrs) < 0)
goto error;
@@ -1738,12 +1869,16 @@ static bool qemuDomainPCIAddressSlotInUse(qemuDomainPCIAddressSetPtr addrs,
return !!addrs->buses[addr->bus].slots[addr->slot];
}
-int qemuDomainPCIAddressReserveAddr(qemuDomainPCIAddressSetPtr addrs,
- virDevicePCIAddressPtr addr)
+
+int
+qemuDomainPCIAddressReserveAddr(qemuDomainPCIAddressSetPtr addrs,
+ virDevicePCIAddressPtr addr,
+ qemuDomainPCIConnectFlags flags)
{
char *str;
+ qemuDomainPCIAddressBusPtr bus;
- if (addrs->dryRun && qemuDomainPCIAddressSetGrow(addrs, addr) < 0)
+ if (addrs->dryRun && qemuDomainPCIAddressSetGrow(addrs, addr, flags) < 0)
return -1;
if (!(str = qemuPCIAddressAsString(addr)))
@@ -1751,9 +1886,19 @@ int qemuDomainPCIAddressReserveAddr(qemuDomainPCIAddressSetPtr addrs,
VIR_DEBUG("Reserving PCI addr %s", str);
- if (addrs->buses[addr->bus].slots[addr->slot] & (1 << addr->function)) {
+ bus = &addrs->buses[addr->bus];
+ if ((bus->minSlot && addr->slot < bus->minSlot) ||
+ addr->slot > bus->maxSlot) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Unable to reserve PCI address %s. "
+ "Slot %02x can't be used on bus %04x, "
+ "only slots %02zx - %02zx are permitted on this bus."),
+ str, addr->slot, addr->bus, bus->minSlot, bus->maxSlot);
+ }
+
+ if (bus->slots[addr->slot] & (1 << addr->function)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
- _("unable to reserve PCI address %s"), str);
+ _("unable to reserve PCI address %s already in use"), str);
VIR_FREE(str);
return -1;
}
@@ -1763,16 +1908,19 @@ int qemuDomainPCIAddressReserveAddr(qemuDomainPCIAddressSetPtr addrs,
addrs->lastaddr = *addr;
addrs->lastaddr.function = 0;
addrs->lastaddr.multi = 0;
- addrs->buses[addr->bus].slots[addr->slot] |= 1 << addr->function;
+ bus->slots[addr->slot] |= 1 << addr->function;
return 0;
}
-int qemuDomainPCIAddressReserveSlot(qemuDomainPCIAddressSetPtr addrs,
- virDevicePCIAddressPtr addr)
+
+int
+qemuDomainPCIAddressReserveSlot(qemuDomainPCIAddressSetPtr addrs,
+ virDevicePCIAddressPtr addr,
+ qemuDomainPCIConnectFlags flags)
{
char *str;
- if (addrs->dryRun && qemuDomainPCIAddressSetGrow(addrs, addr) < 0)
+ if (addrs->dryRun && qemuDomainPCIAddressSetGrow(addrs, addr, flags) < 0)
return -1;
if (!(str = qemuPCIAddressAsString(addr)))
@@ -1796,6 +1944,10 @@ int qemuDomainPCIAddressEnsureAddr(qemuDomainPCIAddressSetPtr addrs,
virDomainDeviceInfoPtr dev)
{
int ret = 0;
+ /* FIXME: flags should be set according to the particular device */
+ qemuDomainPCIConnectFlags flags = (QEMU_PCI_CONNECT_HOTPLUGGABLE |
+ QEMU_PCI_CONNECT_TYPE_PCI);
+
if (dev->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
/* We do not support hotplug multi-function PCI device now, so we should
* reserve the whole slot. The function of the PCI device must be 0.
@@ -1807,12 +1959,12 @@ int qemuDomainPCIAddressEnsureAddr(qemuDomainPCIAddressSetPtr addrs,
return -1;
}
- if (!qemuPCIAddressValidate(addrs, &dev->addr.pci))
+ if (!qemuPCIAddressValidate(addrs, &dev->addr.pci, flags))
return -1;
- ret = qemuDomainPCIAddressReserveSlot(addrs, &dev->addr.pci);
+ ret = qemuDomainPCIAddressReserveSlot(addrs, &dev->addr.pci, flags);
} else {
- ret = qemuDomainPCIAddressSetNextAddr(addrs, dev);
+ ret = qemuDomainPCIAddressSetNextAddr(addrs, dev, flags);
}
return ret;
}
@@ -1829,7 +1981,12 @@ static int
qemuDomainPCIAddressReleaseSlot(qemuDomainPCIAddressSetPtr addrs,
virDevicePCIAddressPtr addr)
{
- if (!qemuPCIAddressValidate(addrs, addr))
+ /* permit any kind of connection type in validation, since we
+ * already had it, and are giving it back.
+ */
+ qemuDomainPCIConnectFlags flags = QEMU_PCI_CONNECT_TYPES_MASK;
+
+ if (!qemuPCIAddressValidate(addrs, addr, flags))
return -1;
addrs->buses[addr->bus].slots[addr->slot] = 0;
@@ -1848,7 +2005,8 @@ void qemuDomainPCIAddressSetFree(qemuDomainPCIAddressSetPtr addrs)
static int
qemuDomainPCIAddressGetNextSlot(qemuDomainPCIAddressSetPtr addrs,
- virDevicePCIAddressPtr next_addr)
+ virDevicePCIAddressPtr next_addr,
+ qemuDomainPCIConnectFlags flags)
{
virDevicePCIAddress a = addrs->lastaddr;
@@ -1872,7 +2030,7 @@ qemuDomainPCIAddressGetNextSlot(qemuDomainPCIAddressSetPtr addrs,
/* There were no free slots after the last used one */
if (addrs->dryRun) {
/* a is already set to the first new bus and slot 1 */
- if (qemuDomainPCIAddressSetGrow(addrs, &a) < 0)
+ if (qemuDomainPCIAddressSetGrow(addrs, &a, flags) < 0)
return -1;
goto success;
} else {
@@ -1900,14 +2058,16 @@ success:
return 0;
}
-int qemuDomainPCIAddressSetNextAddr(qemuDomainPCIAddressSetPtr addrs,
- virDomainDeviceInfoPtr dev)
+int
+qemuDomainPCIAddressSetNextAddr(qemuDomainPCIAddressSetPtr addrs,
+ virDomainDeviceInfoPtr dev,
+ qemuDomainPCIConnectFlags flags)
{
virDevicePCIAddress addr;
- if (qemuDomainPCIAddressGetNextSlot(addrs, &addr) < 0)
+ if (qemuDomainPCIAddressGetNextSlot(addrs, &addr, flags) < 0)
return -1;
- if (qemuDomainPCIAddressReserveSlot(addrs, &addr) < 0)
+ if (qemuDomainPCIAddressReserveSlot(addrs, &addr, flags) < 0)
return -1;
if (!addrs->dryRun) {
@@ -1991,6 +2151,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
{
size_t i, j;
bool qemuDeviceVideoUsable = virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
+ qemuDomainPCIConnectFlags flags;
virDevicePCIAddress tmp_addr;
virDevicePCIAddressPtr addrptr;
bool isPIIX3 = STRPREFIX(def->os.machine, "pc-0.") ||
@@ -2003,6 +2164,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
if (isPIIX3) {
/* Verify that first IDE and USB controllers (if any) is on the PIIX3, fn 1 */
for (i = 0; i < def->ncontrollers; i++) {
+ flags = QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI;
/* First IDE controller lives on the PIIX3 at slot=1, function=1 */
if (def->controllers[i]->type == VIR_DOMAIN_CONTROLLER_TYPE_IDE &&
def->controllers[i]->idx == 0) {
@@ -2045,14 +2207,16 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
}
}
+ flags = QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI;
+
/* PIIX3 (ISA bridge, IDE controller, something else unknown, USB controller)
* hardcoded slot=1, multifunction device
*/
if (addrs->nbuses) {
memset(&tmp_addr, 0, sizeof(tmp_addr));
tmp_addr.slot = 1;
- if (qemuDomainPCIAddressReserveSlot(addrs, &tmp_addr) < 0)
- goto error;
+ if (qemuDomainPCIAddressReserveSlot(addrs, &tmp_addr, flags) < 0)
+ goto error;
}
if (def->nvideos > 0) {
@@ -2065,13 +2229,13 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
primaryVideo->info.addr.pci.function = 0;
addrptr = &primaryVideo->info.addr.pci;
- if (!qemuPCIAddressValidate(addrs, addrptr))
+ if (!qemuPCIAddressValidate(addrs, addrptr, flags))
goto error;
if (qemuDomainPCIAddressSlotInUse(addrs, addrptr)) {
if (qemuDeviceVideoUsable) {
virResetLastError();
- if (qemuDomainPCIAddressSetNextAddr(addrs, &primaryVideo->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &primaryVideo->info, flags) < 0)
goto error;
} else {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
@@ -2079,7 +2243,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
"QEMU needs it for primary video"));
goto error;
}
- } else if (qemuDomainPCIAddressReserveSlot(addrs, addrptr) < 0) {
+ } else if (qemuDomainPCIAddressReserveSlot(addrs, addrptr, flags) < 0) {
goto error;
}
} else if (!qemuDeviceVideoUsable) {
@@ -2103,11 +2267,12 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
" device will not be possible without manual"
" intervention");
virResetLastError();
- } else if (qemuDomainPCIAddressReserveSlot(addrs, &tmp_addr) < 0) {
+ } else if (qemuDomainPCIAddressReserveSlot(addrs, &tmp_addr, flags) < 0) {
goto error;
}
}
}
+ flags = QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI;
/* PCI controllers */
for (i = 0; i < def->ncontrollers; i++) {
@@ -2116,7 +2281,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
continue;
if (def->controllers[i]->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
continue;
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->controllers[i]->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->controllers[i]->info, flags) < 0)
goto error;
}
}
@@ -2127,7 +2292,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
/* Only support VirtIO-9p-pci so far. If that changes,
* we might need to skip devices here */
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->fss[i]->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->fss[i]->info, flags) < 0)
goto error;
}
@@ -2141,7 +2306,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
(def->nets[i]->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)) {
continue;
}
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->nets[i]->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->nets[i]->info, flags) < 0)
goto error;
}
@@ -2154,7 +2319,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
def->sounds[i]->model == VIR_DOMAIN_SOUND_MODEL_PCSPK)
continue;
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->sounds[i]->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->sounds[i]->info, flags) < 0)
goto error;
}
@@ -2216,20 +2381,20 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
if (addr.slot == 0) {
/* This is the first part of the controller, so need
* to find a free slot & then reserve a function */
- if (qemuDomainPCIAddressGetNextSlot(addrs, &tmp_addr) < 0)
+ if (qemuDomainPCIAddressGetNextSlot(addrs, &tmp_addr, flags) < 0)
goto error;
addr.bus = tmp_addr.bus;
addr.slot = tmp_addr.slot;
}
/* Finally we can reserve the slot+function */
- if (qemuDomainPCIAddressReserveAddr(addrs, &addr) < 0)
+ if (qemuDomainPCIAddressReserveAddr(addrs, &addr, flags) < 0)
goto error;
def->controllers[i]->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI;
def->controllers[i]->info.addr.pci = addr;
} else {
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->controllers[i]->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->controllers[i]->info, flags) < 0)
goto error;
}
}
@@ -2254,7 +2419,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
goto error;
}
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->disks[i]->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->disks[i]->info, flags) < 0)
goto error;
}
@@ -2266,7 +2431,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
def->hostdevs[i]->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
- if (qemuDomainPCIAddressSetNextAddr(addrs, def->hostdevs[i]->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, def->hostdevs[i]->info, flags) < 0)
goto error;
}
@@ -2274,7 +2439,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
if (def->memballoon &&
def->memballoon->model == VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO &&
def->memballoon->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->memballoon->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->memballoon->info, flags) < 0)
goto error;
}
@@ -2282,7 +2447,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
if (def->rng &&
def->rng->model == VIR_DOMAIN_RNG_MODEL_VIRTIO &&
def->rng->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->rng->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->rng->info, flags) < 0)
goto error;
}
@@ -2290,7 +2455,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
if (def->watchdog &&
def->watchdog->model != VIR_DOMAIN_WATCHDOG_MODEL_IB700 &&
def->watchdog->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->watchdog->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->watchdog->info, flags) < 0)
goto error;
}
@@ -2303,7 +2468,7 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
}
if (def->videos[i]->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
continue;
- if (qemuDomainPCIAddressSetNextAddr(addrs, &def->videos[i]->info) < 0)
+ if (qemuDomainPCIAddressSetNextAddr(addrs, &def->videos[i]->info, flags) < 0)
goto error;
}
for (i = 0; i < def->ninputs; i++) {
diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h
index e15fe64..ede67fe 100644
--- a/src/qemu/qemu_command.h
+++ b/src/qemu/qemu_command.h
@@ -225,6 +225,23 @@ void qemuDomainReleaseDeviceAddress(virDomainObjPtr vm,
virDomainDeviceInfoPtr info,
const char *devstr);
+typedef enum {
+ QEMU_PCI_CONNECT_HOTPLUGGABLE = 1 << 0,
+ /* This bus supports hot-plug */
+ QEMU_PCI_CONNECT_SINGLESLOT = 1 << 1,
+ /* This "bus" has only a single downstream slot/port */
+
+ QEMU_PCI_CONNECT_TYPE_PCI = 1 << 2,
+ /* PCI devices can connect to this bus */
+} qemuDomainPCIConnectFlags;
+
+/* a combination of all bit that describe the type of connections
+ * allowed, e.g. PCI, PCIe, switch
+ */
+#define QEMU_PCI_CONNECT_TYPES_MASK \
+ QEMU_PCI_CONNECT_TYPE_PCI
+
+
int qemuDomainAssignPCIAddresses(virDomainDefPtr def,
virQEMUCapsPtr qemuCaps,
virDomainObjPtr obj);
@@ -232,11 +249,14 @@ qemuDomainPCIAddressSetPtr qemuDomainPCIAddressSetCreate(virDomainDefPtr def,
unsigned int nbuses,
bool dryRun);
int qemuDomainPCIAddressReserveSlot(qemuDomainPCIAddressSetPtr addrs,
- virDevicePCIAddressPtr addr);
+ virDevicePCIAddressPtr addr,
+ qemuDomainPCIConnectFlags flags);
int qemuDomainPCIAddressReserveAddr(qemuDomainPCIAddressSetPtr addrs,
- virDevicePCIAddressPtr addr);
+ virDevicePCIAddressPtr addr,
+ qemuDomainPCIConnectFlags flags);
int qemuDomainPCIAddressSetNextAddr(qemuDomainPCIAddressSetPtr addrs,
- virDomainDeviceInfoPtr dev);
+ virDomainDeviceInfoPtr dev,
+ qemuDomainPCIConnectFlags flags);
int qemuDomainPCIAddressEnsureAddr(qemuDomainPCIAddressSetPtr addrs,
virDomainDeviceInfoPtr dev);
int qemuDomainPCIAddressReleaseAddr(qemuDomainPCIAddressSetPtr addrs,
--
1.7.11.7
More information about the libvir-list
mailing list