[libvirt] [PATCH 2/6] conf: Introduce new XML tag "mode" for disk source

John Ferlan jferlan at redhat.com
Thu Jun 20 17:31:50 UTC 2013


On 06/18/2013 04:36 AM, Osier Yang wrote:
> There are two ways to use a iSCSI LUN as disk source for qemu.
> 
> * The LUN's path showed up on host, e.g.
>   /dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1
> 
> * The libiscsi URI, e.g.
>   iscsi://demo.org:6000/iqn.1992-01.com.example/1
> 
> For a "volume" type disk, if the specified "pool" is of iscsi
> type, we should support to use the LUN either of above 2 ways.
> That's why to introduce a new XML tag "mode" for the disk source
> (libvirt should support iscsi pool with libiscsi, but it's another
> new feature, which should be done later).
> 
> The "mode" can be either of "host" or "uri". "host" to indicate
> use the LUN with the path showed up on host. "uri" to indicate
> use it with the libiscsi URI (future patches may support to use
> network type libvirt storage too, e.g. Ceph, that's why to use
> a more general name "uri").
> ---
>  docs/formatdomain.html.in     |  9 ++++++++-
>  docs/schemas/domaincommon.rng |  8 ++++++++
>  src/conf/domain_conf.c        | 24 +++++++++++++++++++++++-
>  src/conf/domain_conf.h        | 22 ++++++++++++++++++++++
>  tests/qemuxml2xmltest.c       |  1 +
>  5 files changed, 62 insertions(+), 2 deletions(-)
> 

I think you're missing something from the commit (from my valgrind run):

TEST: qemuxml2xmltest
      ........................................ 40
      ........................................ 80

......................................./home/jferlan/libvirt.work/tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool-mode.xml:
failed to open: No such file or directory
/home/jferlan/libvirt.work/tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool-mode.xml:
failed to open: No such file or directory
! 120
      ............................             148 FAIL

> diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
> index 755d084..4e344a2 100644
> --- a/docs/formatdomain.html.in
> +++ b/docs/formatdomain.html.in
> @@ -1557,7 +1557,14 @@
>          <code>pool</code> and <code>volume</code>. Attribute <code>pool</code>
>          specifies the name of storage pool (managed by libvirt) where the disk
>          source resides, and attribute <code>volume</code> specifies the name of
> -        storage volume (managed by libvirt) used as the disk source.
> +        storage volume (managed by libvirt) used as the disk source. For a
> +        "volume" type disk, if the underlying storage pool is "iscsi", attribute
> +        <code>mode</code> (<span class="since">since 1.0.7</span>) can be used
> +        to indicate how to represent the LUN as the disk source. value "host"
> +        indicate to use the LUN's path showed up on host, e.g.
> +        /dev/disk/by-path/ip-10.11.12.9:3260-iscsi-iqn.2013-06.fc:iscsi.iscsi0-lun-1)
> +        . Value "uri" indicates to use the libiscsi URI, e.g.
> +        file=iscsi://demo.org:6000/iqn.1992-01.com.example/1. Defaults to "host".
>          <span class="since">Since 0.0.3; <code>type='dir'</code> since
>          0.7.5; <code>type='network'</code> since
>          0.8.7; <code>protocol='iscsi'</code> since 1.0.4;
> diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
> index 3cace35..ac61582 100644
> --- a/docs/schemas/domaincommon.rng
> +++ b/docs/schemas/domaincommon.rng
> @@ -1145,6 +1145,14 @@
>                    <ref name="volName"/>
>                  </attribute>
>                  <optional>
> +                  <attribute name="mode">
> +                    <choice>
> +                      <value>host</value>
> +                      <value>uri</value>
> +                    </choice>
> +                  </attribute>
> +                </optional>
> +                <optional>
>                    <ref name="startupPolicy"/>
>                  </optional>
>                  <optional>
> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
> index 3e81013..009a8aa 100644
> --- a/src/conf/domain_conf.c
> +++ b/src/conf/domain_conf.c
> @@ -756,6 +756,12 @@ VIR_ENUM_IMPL(virDomainDiskDiscard, VIR_DOMAIN_DISK_DISCARD_LAST,
>                "unmap",
>                "ignore")
>  
> +VIR_ENUM_IMPL(virDomainDiskSourcePoolMode,
> +              VIR_DOMAIN_DISK_SOURCE_POOL_MODE_LAST,
> +              "default",
> +              "host",
> +              "uri")
> +

Can someone actually provide "default" as an option or was this a
cut-n-paste type error?  It'll be zero which I think doesn't do anything
according to what I read below.

It seems you're just following the virDomainDiskDiscard model, right?

>  #define VIR_DOMAIN_XML_WRITE_FLAGS  VIR_DOMAIN_XML_SECURE
>  #define VIR_DOMAIN_XML_READ_FLAGS   VIR_DOMAIN_XML_INACTIVE
>  
> @@ -4600,10 +4606,12 @@ virDomainDiskSourcePoolDefParse(xmlNodePtr node,
>  {
>      char *pool = NULL;
>      char *volume = NULL;
> +    char *mode = NULL;
>      int ret = -1;
>  
>      pool = virXMLPropString(node, "pool");
>      volume = virXMLPropString(node, "volume");
> +    mode = virXMLPropString(node, "mode");
>  
>      /* CD-ROM and Floppy allows no source */
>      if (!pool && !volume)
> @@ -4621,6 +4629,14 @@ virDomainDiskSourcePoolDefParse(xmlNodePtr node,
>          goto cleanup;
>      }
>  
> +    if (mode && (def->srcpool->mode =
> +                 virDomainDiskSourcePoolModeTypeFromString(mode)) <= 0) {
> +        virReportError(VIR_ERR_XML_ERROR,
> +                       _("unknown source mode '%s' for volume type disk"),
> +                       mode);
> +        goto cleanup;
> +    }
> +

Hmm.. guess that answer's my question above as 'default' would translate
to 0 which would cause failure.


>      def->srcpool->pool = pool;
>      pool = NULL;
>      def->srcpool->volume = volume;
> @@ -4631,6 +4647,7 @@ virDomainDiskSourcePoolDefParse(xmlNodePtr node,
>  cleanup:
>      VIR_FREE(pool);
>      VIR_FREE(volume);
> +    VIR_FREE(mode);
>      return ret;
>  }
>  
> @@ -13856,9 +13873,14 @@ virDomainDiskSourceDefFormat(virBufferPtr buf,
>          case VIR_DOMAIN_DISK_TYPE_VOLUME:
>              virBufferAddLit(buf, "      <source");
>  
> -            if (def->srcpool)
> +            if (def->srcpool) {
>                  virBufferAsprintf(buf, " pool='%s' volume='%s'",
>                                    def->srcpool->pool, def->srcpool->volume);
> +                if (def->srcpool->mode)
> +                    virBufferAsprintf(buf, " mode='%s'",
> +                                      virDomainDiskSourcePoolModeTypeToString(def->srcpool->mode));
> +            }
> +
>              if (def->startupPolicy)
>                  virBufferEscapeString(buf, " startupPolicy='%s'", startupPolicy);
>  
> diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
> index b8edb1e..d57b7c3 100644
> --- a/src/conf/domain_conf.h
> +++ b/src/conf/domain_conf.h
> @@ -646,11 +646,32 @@ struct _virDomainBlockIoTuneInfo {
>  };
>  typedef virDomainBlockIoTuneInfo *virDomainBlockIoTuneInfoPtr;
>  
> +/*
> + * Used for volume "type" disk to indicate how to represent
> + * the disk source if the specified "pool" is of iscsi type.
> + */
> +enum virDomainDiskSourcePoolMode {
> +    VIR_DOMAIN_DISK_SOURCE_POOL_MODE_DEFAULT = 0,
> +
> +    /* Use the path showed up on host, e.g.
> +     * /dev/disk/by-path/ip-$ip-iscsi-$iqn:iscsi.iscsi-pool0-lun-1
> +     */
> +    VIR_DOMAIN_DISK_SOURCE_POOL_MODE_HOST,
> +
> +    /* Use the URI. E.g.
> +     * file=iscsi://demo.org:6000/iqn.1992-01.com.example/1.
> +     */
> +    VIR_DOMAIN_DISK_SOURCE_POOL_MODE_URI,
> +
> +    VIR_DOMAIN_DISK_SOURCE_POOL_MODE_LAST
> +};
> +
>  typedef struct _virDomainDiskSourcePoolDef virDomainDiskSourcePoolDef;
>  struct _virDomainDiskSourcePoolDef {
>      char *pool; /* pool name */
>      char *volume; /* volume name */
>      int voltype; /* enum virStorageVolType, internal only */
> +    int mode; /* enum virDomainDiskSourcePoolMode */
>  };
>  typedef virDomainDiskSourcePoolDef *virDomainDiskSourcePoolDefPtr;
>  
> @@ -2497,6 +2518,7 @@ VIR_ENUM_DECL(virDomainDiskSecretType)
>  VIR_ENUM_DECL(virDomainDeviceSGIO)
>  VIR_ENUM_DECL(virDomainDiskTray)
>  VIR_ENUM_DECL(virDomainDiskDiscard)
> +VIR_ENUM_DECL(virDomainDiskSourcePoolMode)
>  VIR_ENUM_DECL(virDomainIoEventFd)
>  VIR_ENUM_DECL(virDomainVirtioEventIdx)
>  VIR_ENUM_DECL(virDomainDiskCopyOnRead)
> diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c
> index 06e4206..cb14cb9 100644
> --- a/tests/qemuxml2xmltest.c
> +++ b/tests/qemuxml2xmltest.c
> @@ -261,6 +261,7 @@ mymain(void)
>  
>      DO_TEST("disk-scsi-disk-vpd");
>      DO_TEST("disk-source-pool");
> +    DO_TEST("disk-source-pool-mode");

NOTE: See above - something is missing from the commit.

>  
>      DO_TEST("disk-drive-discard");
>  
> 

I think once the test is include, this is good to go.

John




More information about the libvir-list mailing list