[libvirt] [PATCH 2/3] Improve LXC startup error reporting
Daniel P. Berrange
berrange at redhat.com
Wed Mar 6 16:16:40 UTC 2013
From: "Daniel P. Berrange" <berrange at redhat.com>
Currently we rely on a VIR_ERROR message being logged by the
virRaiseError function to report LXC startup errors. This gives
the right message, but is rather ugly and can be truncated
if lots of log messages are written. Change the LXC controller
to explicitly print any virErrorPtr message to stderr. Then
change the driver to skip over anything that looks like a log
message.
The result is that this
error: Failed to start domain busy
error: internal error guest failed to start: 2013-03-04 19:46:42.846+0000: 1734: info : libvirt version: 1.0.2
2013-03-04 19:46:42.846+0000: 1734: error : virFileLoopDeviceAssociate:600 : Unable to open /root/disk.raw: No such file or directory
changes to
error: Failed to start domain busy
error: internal error guest failed to start: Unable to open /root/disk.raw: No such file or directory
Signed-off-by: Daniel P. Berrange <berrange at redhat.com>
---
src/lxc/lxc_controller.c | 7 ++-
src/lxc/lxc_process.c | 130 ++++++++++++++++++++++++++++++++---------------
2 files changed, 94 insertions(+), 43 deletions(-)
diff --git a/src/lxc/lxc_controller.c b/src/lxc/lxc_controller.c
index 15aa334..78e8a70 100644
--- a/src/lxc/lxc_controller.c
+++ b/src/lxc/lxc_controller.c
@@ -1706,7 +1706,6 @@ int main(int argc, char *argv[])
rc = virLXCControllerRun(ctrl);
cleanup:
- virPidFileDelete(LXC_STATE_DIR, name);
if (ctrl)
virLXCControllerDeleteInterfaces(ctrl);
for (i = 0 ; i < nttyFDs ; i++)
@@ -1715,5 +1714,11 @@ cleanup:
virLXCControllerFree(ctrl);
+ if (rc < 0) {
+ virErrorPtr err = virGetLastError();
+ if (err && err->message)
+ fprintf(stderr, "%s\n", err->message);
+ }
+
return rc < 0? EXIT_FAILURE : EXIT_SUCCESS;
}
diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c
index aaa81a7..6020f6f 100644
--- a/src/lxc/lxc_process.c
+++ b/src/lxc/lxc_process.c
@@ -24,6 +24,7 @@
#include <unistd.h>
#include <fcntl.h>
#include <signal.h>
+#include <regex.h>
#include "lxc_process.h"
#include "lxc_domain.h"
@@ -690,6 +691,11 @@ int virLXCProcessStop(virLXCDriverPtr driver,
VIR_DEBUG("Stopping VM name=%s pid=%d reason=%d",
vm->def->name, (int)vm->pid, (int)reason);
+ if (!virDomainObjIsActive(vm)) {
+ VIR_DEBUG("VM '%s' not active", vm->def->name);
+ return 0;
+ }
+
if (vm->pid <= 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Invalid PID %d for container"), vm->pid);
@@ -813,50 +819,27 @@ cleanup:
return NULL;
}
+
static int
-virLXCProcessReadLogOutput(virDomainObjPtr vm,
- char *logfile,
- off_t pos,
- char *buf,
- size_t buflen)
+virLXCProcessReadLogOutputData(virDomainObjPtr vm,
+ int fd,
+ char *buf,
+ size_t buflen)
{
- int fd;
- off_t off;
- int whence;
- int got = 0, ret = -1;
int retries = 10;
+ int got = 0;
+ int ret = -1;
+ char *filter_next = buf;
- if ((fd = open(logfile, O_RDONLY)) < 0) {
- virReportSystemError(errno, _("failed to open logfile %s"),
- logfile);
- goto cleanup;
- }
-
- if (pos < 0) {
- off = 0;
- whence = SEEK_END;
- } else {
- off = pos;
- whence = SEEK_SET;
- }
-
- if (lseek(fd, off, whence) < 0) {
- if (whence == SEEK_END)
- virReportSystemError(errno,
- _("unable to seek to end of log for %s"),
- logfile);
- else
- virReportSystemError(errno,
- _("unable to seek to %lld from start for %s"),
- (long long)off, logfile);
- goto cleanup;
- }
+ buf[0] = '\0';
while (retries) {
ssize_t bytes;
int isdead = 0;
+ char *eol;
- if (kill(vm->pid, 0) == -1 && errno == ESRCH)
+ if (vm->pid <= 0 ||
+ (kill(vm->pid, 0) == -1 && errno == ESRCH))
isdead = 1;
/* Any failures should be detected before we read the log, so we
@@ -864,28 +847,85 @@ virLXCProcessReadLogOutput(virDomainObjPtr vm,
bytes = saferead(fd, buf+got, buflen-got-1);
if (bytes < 0) {
virReportSystemError(errno, "%s",
- _("Failure while reading guest log output"));
+ _("Failure while reading log output"));
goto cleanup;
}
got += bytes;
buf[got] = '\0';
- if ((got == buflen-1) || isdead) {
- break;
+ /* Filter out debug messages from intermediate libvirt process */
+ while ((eol = strchr(filter_next, '\n'))) {
+ *eol = '\0';
+ if (virLogProbablyLogMessage(filter_next)) {
+ memmove(filter_next, eol + 1, got - (eol - buf));
+ got -= eol + 1 - filter_next;
+ } else {
+ filter_next = eol + 1;
+ *eol = '\n';
+ }
+ }
+
+ if (got == buflen-1) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Out of space while reading log output: %s"),
+ buf);
+ goto cleanup;
+ }
+
+ if (isdead) {
+ ret = got;
+ goto cleanup;
}
usleep(100*1000);
retries--;
}
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Timed out while reading log output: %s"),
+ buf);
- ret = got;
cleanup:
+ return ret;
+}
+
+
+static int
+virLXCProcessReadLogOutput(virDomainObjPtr vm,
+ char *logfile,
+ off_t pos,
+ char *buf,
+ size_t buflen)
+{
+ int fd = -1;
+ int ret;
+
+ if ((fd = open(logfile, O_RDONLY)) < 0) {
+ virReportSystemError(errno,
+ _("Unable to open log file %s"),
+ logfile);
+ return -1;
+ }
+
+ if (lseek(fd, pos, SEEK_SET) < 0) {
+ virReportSystemError(errno,
+ _("Unable to seek log file %s to %llu"),
+ logfile, (unsigned long long)pos);
+ VIR_FORCE_CLOSE(fd);
+ return -1;
+ }
+
+ ret = virLXCProcessReadLogOutputData(vm,
+ fd,
+ buf,
+ buflen);
+
VIR_FORCE_CLOSE(fd);
return ret;
}
+
/**
* virLXCProcessStart:
* @conn: pointer to connection
@@ -1124,9 +1164,15 @@ int virLXCProcessStart(virConnectPtr conn,
/* And get its pid */
if ((r = virPidFileRead(driver->stateDir, vm->def->name, &vm->pid)) < 0) {
- virReportSystemError(-r,
- _("Failed to read pid file %s/%s.pid"),
- driver->stateDir, vm->def->name);
+ char out[1024];
+
+ if (virLXCProcessReadLogOutput(vm, logfile, pos, out, 1024) > 0)
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("guest failed to start: %s"), out);
+ else
+ virReportSystemError(-r,
+ _("Failed to read pid file %s/%s.pid"),
+ driver->stateDir, vm->def->name);
goto cleanup;
}
--
1.7.11.7
More information about the libvir-list
mailing list