[libvirt] [PATCH 2/2] qemu: specify domain in host-side PCI addresses when needed/supported
Laine Stump
laine at laine.org
Wed Apr 30 13:04:01 UTC 2014
This uses the new QEMU_CAPS_HOST_PCI_MULTIDOMAIN capability when
present, for pci-assign and vfio-pci devices only. It is not supported
for -pcidevice, as that form of device assignment is old and
deprecated.
While creating tests for this new functionality, I noticed that the
xmls for two existing tests had erroneously specified an
until-now-ignored domain="0x0002", so I corrected those two tests, and
also added two failure tests to be sure that we alert users who
attempt to use a non-zero domain with a qemu that doesn't support it.
---
src/qemu/qemu_command.c | 13 ++++++-
.../qemuxml2argv-hostdev-vfio-multidomain.args | 6 ++++
.../qemuxml2argv-hostdev-vfio-multidomain.xml | 33 +++++++++++++++++
.../qemuxml2argv-net-hostdev-multidomain.args | 7 ++++
.../qemuxml2argv-net-hostdev-multidomain.xml | 40 +++++++++++++++++++++
.../qemuxml2argv-net-hostdev-vfio-multidomain.args | 7 ++++
.../qemuxml2argv-net-hostdev-vfio-multidomain.xml | 41 ++++++++++++++++++++++
.../qemuxml2argv-net-hostdev-vfio.xml | 2 +-
.../qemuxml2argvdata/qemuxml2argv-net-hostdev.xml | 2 +-
tests/qemuxml2argvtest.c | 18 ++++++++++
10 files changed, 166 insertions(+), 3 deletions(-)
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-vfio-multidomain.args
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-vfio-multidomain.xml
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-multidomain.args
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-multidomain.xml
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio-multidomain.args
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio-multidomain.xml
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 961c679..2e57825 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -5522,7 +5522,18 @@ qemuBuildPCIHostdevDevStr(virDomainDefPtr def,
break;
}
- virBufferAsprintf(&buf, ",host=%.2x:%.2x.%.1x",
+ virBufferAddLit(&buf, ",host=");
+ if (dev->source.subsys.u.pci.addr.domain) {
+ if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_HOST_PCI_MULTIDOMAIN)) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("non-zero domain='%.4x' in host device PCI address "
+ "not supported in this QEMU binary"),
+ dev->source.subsys.u.pci.addr.domain);
+ goto error;
+ }
+ virBufferAsprintf(&buf, "%.4x:", dev->source.subsys.u.pci.addr.domain);
+ }
+ virBufferAsprintf(&buf, "%.2x:%.2x.%.1x",
dev->source.subsys.u.pci.addr.bus,
dev->source.subsys.u.pci.addr.slot,
dev->source.subsys.u.pci.addr.function);
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-vfio-multidomain.args b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-vfio-multidomain.args
new file mode 100644
index 0000000..2761543
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-vfio-multidomain.args
@@ -0,0 +1,6 @@
+LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \
+/usr/bin/qemu -S -M \
+pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -monitor \
+unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -usb -hda \
+/dev/HostVG/QEMUGuest2 -device vfio-pci,host=55aa:20:0f.3,id=hostdev0,\
+bus=pci.0,addr=0x3 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-vfio-multidomain.xml b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-vfio-multidomain.xml
new file mode 100644
index 0000000..efbff38
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-vfio-multidomain.xml
@@ -0,0 +1,33 @@
+<domain type='qemu'>
+ <name>QEMUGuest2</name>
+ <uuid>c7a5fdbd-edaf-9466-926a-d65c16db1809</uuid>
+ <memory unit='KiB'>219100</memory>
+ <currentMemory unit='KiB'>219100</currentMemory>
+ <vcpu placement='static'>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>destroy</on_crash>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <disk type='block' device='disk'>
+ <source dev='/dev/HostVG/QEMUGuest2'/>
+ <target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='usb' index='0'/>
+ <controller type='ide' index='0'/>
+ <controller type='pci' index='0' model='pci-root'/>
+ <hostdev mode='subsystem' type='pci' managed='yes'>
+ <driver name='vfio'/>
+ <source>
+ <address domain='0x55aa' bus='32' slot='15' function='3'/>
+ </source>
+ </hostdev>
+ <memballoon model='virtio'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-multidomain.args b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-multidomain.args
new file mode 100644
index 0000000..5c8f0a7
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-multidomain.args
@@ -0,0 +1,7 @@
+LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \
+/usr/bin/qemu -S \
+-M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -monitor \
+unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \
+-usb -hda /dev/HostVG/QEMUGuest1 \
+-device pci-assign,host=2424:21:1c.6,id=hostdev0,bus=pci.0,addr=0x3 \
+-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-multidomain.xml b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-multidomain.xml
new file mode 100644
index 0000000..14b9515
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-multidomain.xml
@@ -0,0 +1,40 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory unit='KiB'>219136</memory>
+ <currentMemory unit='KiB'>219136</currentMemory>
+ <vcpu placement='static'>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>destroy</on_crash>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <disk type='block' device='disk'>
+ <source dev='/dev/HostVG/QEMUGuest1'/>
+ <target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='usb' index='0'/>
+ <controller type='ide' index='0'/>
+ <controller type='pci' index='0' model='pci-root'/>
+ <interface type='hostdev' managed='yes'>
+ <mac address='00:11:22:33:44:55'/>
+ <source>
+ <address type='pci' domain='0x2424' bus='0x21' slot='0x1c' function='0x6'/>
+ </source>
+ <vlan>
+ <tag id='42'/>
+ </vlan>
+ <virtualport type='802.1Qbg'>
+ <parameters managerid='11' typeid='1193047' typeidversion='2' instanceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
+ </virtualport>
+ <model type='rtl8139'/>
+ </interface>
+ <memballoon model='virtio'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio-multidomain.args b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio-multidomain.args
new file mode 100644
index 0000000..201c8ea
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio-multidomain.args
@@ -0,0 +1,7 @@
+LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \
+/usr/bin/qemu -S \
+-M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults -monitor \
+unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \
+-usb -hda /dev/HostVG/QEMUGuest1 \
+-device vfio-pci,host=0021:de:1f.1,id=hostdev0,bus=pci.0,addr=0x3 \
+-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio-multidomain.xml b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio-multidomain.xml
new file mode 100644
index 0000000..5e834ad
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio-multidomain.xml
@@ -0,0 +1,41 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory unit='KiB'>219136</memory>
+ <currentMemory unit='KiB'>219136</currentMemory>
+ <vcpu placement='static'>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>destroy</on_crash>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <disk type='block' device='disk'>
+ <source dev='/dev/HostVG/QEMUGuest1'/>
+ <target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='usb' index='0'/>
+ <controller type='ide' index='0'/>
+ <controller type='pci' index='0' model='pci-root'/>
+ <interface type='hostdev' managed='yes'>
+ <mac address='00:11:22:33:44:55'/>
+ <driver name='vfio'/>
+ <source>
+ <address type='pci' domain='0x0021' bus='0xde' slot='0x1f' function='0x1'/>
+ </source>
+ <vlan>
+ <tag id='42'/>
+ </vlan>
+ <virtualport type='802.1Qbg'>
+ <parameters managerid='11' typeid='1193047' typeidversion='2' instanceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
+ </virtualport>
+ <model type='rtl8139'/>
+ </interface>
+ <memballoon model='virtio'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio.xml b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio.xml
index 90419a4..b4f5e72 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio.xml
+++ b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev-vfio.xml
@@ -26,7 +26,7 @@
<mac address='00:11:22:33:44:55'/>
<driver name='vfio'/>
<source>
- <address type='pci' domain='0x0002' bus='0x03' slot='0x07' function='0x1'/>
+ <address type='pci' domain='0x0000' bus='0x03' slot='0x07' function='0x1'/>
</source>
<vlan>
<tag id='42'/>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev.xml b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev.xml
index d65ef87..f88eefc 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev.xml
+++ b/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev.xml
@@ -25,7 +25,7 @@
<interface type='hostdev' managed='yes'>
<mac address='00:11:22:33:44:55'/>
<source>
- <address type='pci' domain='0x0002' bus='0x03' slot='0x07' function='0x1'/>
+ <address type='pci' domain='0x0000' bus='0x03' slot='0x07' function='0x1'/>
</source>
<vlan>
<tag id='42'/>
diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c
index a1ef2b8..2e21c69 100644
--- a/tests/qemuxml2argvtest.c
+++ b/tests/qemuxml2argvtest.c
@@ -940,9 +940,21 @@ mymain(void)
DO_TEST("net-mcast", NONE);
DO_TEST("net-hostdev",
QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG);
+ DO_TEST("net-hostdev-multidomain",
+ QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG,
+ QEMU_CAPS_HOST_PCI_MULTIDOMAIN);
+ DO_TEST_FAILURE("net-hostdev-multidomain",
+ QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE,
+ QEMU_CAPS_NODEFCONFIG);
DO_TEST("net-hostdev-vfio",
QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VFIO_PCI);
+ DO_TEST("net-hostdev-vfio-multidomain",
+ QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG,
+ QEMU_CAPS_DEVICE_VFIO_PCI, QEMU_CAPS_HOST_PCI_MULTIDOMAIN);
+ DO_TEST_FAILURE("net-hostdev-vfio-multidomain",
+ QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE,
+ QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("serial-vc", NONE);
DO_TEST("serial-pty", NONE);
@@ -1119,6 +1131,12 @@ mymain(void)
DO_TEST("hostdev-vfio",
QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VFIO_PCI);
+ DO_TEST("hostdev-vfio-multidomain",
+ QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG,
+ QEMU_CAPS_DEVICE_VFIO_PCI, QEMU_CAPS_HOST_PCI_MULTIDOMAIN);
+ DO_TEST_FAILURE("hostdev-vfio-multidomain",
+ QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE,
+ QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("pci-rom",
QEMU_CAPS_PCIDEVICE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_ROMBAR);
--
1.9.0
More information about the libvir-list
mailing list