[libvirt] [PATCH 2/2] qemu: Don't fail if the SCSI host device is shareable between domains
Osier Yang
jyang at redhat.com
Wed Jan 8 14:51:30 UTC 2014
It doesn't make sense to fail if the SCSI host device is specified
as "shareable" explicitly between domains (NB, it works if and only
if the device is specified as "shareable" for *all* domains,
otherwise it fails).
To fix the problem, this patch introduces an array for virSCSIDevice
struct, which records all the names of domain which are using the
device (note that the recorded domains must specifiy the device as
shareable). And the change on the data struct brings on many
subsequent changes in the code.
* src/util/virscsi.h:
- Remove virSCSIDeviceGetUsedBy
- Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel
- Add virSCSIDeviceIsAvailable
* src/util/virscsi.c:
- struct virSCSIDevice: Change "used_by" to be an array; Add
"n_used_by" as the array count
- virSCSIDeviceGetUsedBy: Removed
- virSCSIDeviceFree: frees the "used_by" array
- virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential
memory corruption
- virSCSIDeviceIsAvailable: New
- virSCSIDeviceListDel: Change the logic, for device which is already
in the list, just remove the corresponding entry in "used_by"
- Copyright updating
* src/libvirt_private.sys:
- virSCSIDeviceGetUsedBy: Remove
- virSCSIDeviceIsAvailable: New
* src/qemu/qemu_hostdev.c:
- qemuUpdateActiveScsiHostdevs: Check if the device existing before
adding it to the list;
- qemuPrepareHostdevSCSIDevices: Error out if the not all domains
use the device as "shareable"; Also don't try to add the device
to the activeScsiHostdevs list if it already there.
- qemuDomainReAttachHostScsiDevices: Change the logic according
to the changes on helpers.
---
src/libvirt_private.syms | 2 +-
src/qemu/qemu_hostdev.c | 75 ++++++++++++++++++++++++++----------------------
src/util/virscsi.c | 48 +++++++++++++++++++++++++------
src/util/virscsi.h | 7 +++--
4 files changed, 84 insertions(+), 48 deletions(-)
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index 65d1bde..bd5f466 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -1677,7 +1677,7 @@ virSCSIDeviceGetSgName;
virSCSIDeviceGetShareable;
virSCSIDeviceGetTarget;
virSCSIDeviceGetUnit;
-virSCSIDeviceGetUsedBy;
+virSCSIDeviceIsAvailable;
virSCSIDeviceListAdd;
virSCSIDeviceListCount;
virSCSIDeviceListDel;
diff --git a/src/qemu/qemu_hostdev.c b/src/qemu/qemu_hostdev.c
index 86a463a..9d81e94 100644
--- a/src/qemu/qemu_hostdev.c
+++ b/src/qemu/qemu_hostdev.c
@@ -250,13 +250,14 @@ qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver,
virDomainHostdevDefPtr hostdev = NULL;
size_t i;
int ret = -1;
+ virSCSIDevicePtr scsi = NULL;
+ virSCSIDevicePtr tmp = NULL;
if (!def->nhostdevs)
return 0;
virObjectLock(driver->activeScsiHostdevs);
for (i = 0; i < def->nhostdevs; i++) {
- virSCSIDevicePtr scsi = NULL;
hostdev = def->hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS ||
@@ -271,11 +272,18 @@ qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver,
hostdev->shareable)))
goto cleanup;
- virSCSIDeviceSetUsedBy(scsi, def->name);
-
- if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) {
+ if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
+ if (virSCSIDeviceSetUsedBy(tmp, def->name) < 0) {
+ virSCSIDeviceFree(scsi);
+ goto cleanup;
+ }
virSCSIDeviceFree(scsi);
- goto cleanup;
+ } else {
+ if (virSCSIDeviceSetUsedBy(scsi, def->name) < 0 ||
+ virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) {
+ virSCSIDeviceFree(scsi);
+ goto cleanup;
+ }
}
}
ret = 0;
@@ -1118,24 +1126,26 @@ qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver,
for (i = 0; i < count; i++) {
virSCSIDevicePtr scsi = virSCSIDeviceListGet(list, i);
if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
- const char *other_name = virSCSIDeviceGetUsedBy(tmp);
-
- if (other_name)
- virReportError(VIR_ERR_OPERATION_INVALID,
- _("SCSI device %s is in use by domain %s"),
- virSCSIDeviceGetName(tmp), other_name);
- else
+ if (!(virSCSIDeviceGetShareable(scsi) &&
+ virSCSIDeviceGetShareable(tmp))) {
virReportError(VIR_ERR_OPERATION_INVALID,
- _("SCSI device %s is already in use"),
+ _("SCSI device %s is already in use "
+ "by other domain(s)"),
virSCSIDeviceGetName(tmp));
- goto error;
- }
+ goto error;
+ }
- virSCSIDeviceSetUsedBy(scsi, name);
- VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi));
+ if (virSCSIDeviceSetUsedBy(tmp, name) < 0)
+ goto error;
+ } else {
+ if (virSCSIDeviceSetUsedBy(scsi, name) < 0)
+ goto error;
- if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0)
- goto error;
+ VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi));
+
+ if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0)
+ goto error;
+ }
}
virObjectUnlock(driver->activeScsiHostdevs);
@@ -1380,8 +1390,7 @@ qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver,
virObjectLock(driver->activeScsiHostdevs);
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
- virSCSIDevicePtr scsi, tmp;
- const char *used_by = NULL;
+ virSCSIDevicePtr scsi;
virDomainDeviceDef dev;
dev.type = VIR_DOMAIN_DEVICE_HOSTDEV;
@@ -1411,30 +1420,26 @@ qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver,
/* Only delete the devices which are marked as being used by @name,
* because qemuProcessStart could fail on the half way. */
- tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi);
- virSCSIDeviceFree(scsi);
-
- if (!tmp) {
+ if (!virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi)) {
VIR_WARN("Unable to find device %s:%d:%d:%d "
"in list of active SCSI devices",
hostdev->source.subsys.u.scsi.adapter,
hostdev->source.subsys.u.scsi.bus,
hostdev->source.subsys.u.scsi.target,
hostdev->source.subsys.u.scsi.unit);
+ virSCSIDeviceFree(scsi);
continue;
}
- used_by = virSCSIDeviceGetUsedBy(tmp);
- if (STREQ_NULLABLE(used_by, name)) {
- VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeScsiHostdevs",
- hostdev->source.subsys.u.scsi.adapter,
- hostdev->source.subsys.u.scsi.bus,
- hostdev->source.subsys.u.scsi.target,
- hostdev->source.subsys.u.scsi.unit,
- name);
+ VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeScsiHostdevs",
+ hostdev->source.subsys.u.scsi.adapter,
+ hostdev->source.subsys.u.scsi.bus,
+ hostdev->source.subsys.u.scsi.target,
+ hostdev->source.subsys.u.scsi.unit,
+ name);
- virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp);
- }
+ virSCSIDeviceListDel(driver->activeScsiHostdevs, scsi, name);
+ virSCSIDeviceFree(scsi);
}
virObjectUnlock(driver->activeScsiHostdevs);
}
diff --git a/src/util/virscsi.c b/src/util/virscsi.c
index 3998c3a..42030c5 100644
--- a/src/util/virscsi.c
+++ b/src/util/virscsi.c
@@ -1,6 +1,7 @@
/*
* virscsi.c: helper APIs for managing host SCSI devices
*
+ * Copyright (C) 2013 - 2014 Red Hat, Inc.
* Copyright (C) 2013 Fujitsu, Inc.
*
* This library is free software; you can redistribute it and/or
@@ -55,7 +56,8 @@ struct _virSCSIDevice {
char *name; /* adapter:bus:target:unit */
char *id; /* model:vendor */
char *sg_path; /* e.g. /dev/sg2 */
- const char *used_by; /* name of the domain using this dev */
+ char **used_by; /* name of the domains using this dev */
+ size_t n_used_by; /* how many domains are using this dev */
bool readonly;
bool shareable;
@@ -256,26 +258,37 @@ cleanup:
void
virSCSIDeviceFree(virSCSIDevicePtr dev)
{
+ size_t i;
+
if (!dev)
return;
VIR_FREE(dev->id);
VIR_FREE(dev->name);
VIR_FREE(dev->sg_path);
+ for (i = 0; i < dev->n_used_by; i++) {
+ VIR_FREE(dev->used_by[i]);
+ }
+ VIR_FREE(dev->used_by);
VIR_FREE(dev);
}
-void
+int
virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev,
const char *name)
{
- dev->used_by = name;
+ char *copy = NULL;
+
+ if (VIR_STRDUP(copy, name) < 0)
+ return -1;
+
+ return VIR_APPEND_ELEMENT(dev->used_by, dev->n_used_by, copy);
}
-const char *
-virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev)
+bool
+virSCSIDeviceIsAvailable(virSCSIDevicePtr dev)
{
- return dev->used_by;
+ return dev->n_used_by == 0;
}
const char *
@@ -406,10 +419,27 @@ virSCSIDeviceListSteal(virSCSIDeviceListPtr list,
void
virSCSIDeviceListDel(virSCSIDeviceListPtr list,
- virSCSIDevicePtr dev)
+ virSCSIDevicePtr dev,
+ const char *name)
{
- virSCSIDevicePtr ret = virSCSIDeviceListSteal(list, dev);
- virSCSIDeviceFree(ret);
+ virSCSIDevicePtr ret = NULL;
+ size_t i;
+
+ if (!(ret = virSCSIDeviceListFind(list, dev)))
+ return;
+
+ for (i = 0; i < ret->n_used_by; i++) {
+ if (STREQ_NULLABLE(ret->used_by[i], name)) {
+ if (ret->n_used_by > 1) {
+ VIR_DELETE_ELEMENT(ret->used_by, i, ret->n_used_by);
+ } else {
+ ret = virSCSIDeviceListSteal(list, dev);
+ virSCSIDeviceFree(ret);
+ }
+
+ break;
+ }
+ }
}
virSCSIDevicePtr
diff --git a/src/util/virscsi.h b/src/util/virscsi.h
index b2e98ca..aff7e5a 100644
--- a/src/util/virscsi.h
+++ b/src/util/virscsi.h
@@ -50,8 +50,8 @@ virSCSIDevicePtr virSCSIDeviceNew(const char *adapter,
bool shareable);
void virSCSIDeviceFree(virSCSIDevicePtr dev);
-void virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, const char *name);
-const char *virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev);
+int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, const char *name);
+bool virSCSIDeviceIsAvailable(virSCSIDevicePtr dev);
const char *virSCSIDeviceGetName(virSCSIDevicePtr dev);
unsigned int virSCSIDeviceGetAdapter(virSCSIDevicePtr dev);
unsigned int virSCSIDeviceGetBus(virSCSIDevicePtr dev);
@@ -83,7 +83,8 @@ size_t virSCSIDeviceListCount(virSCSIDeviceListPtr list);
virSCSIDevicePtr virSCSIDeviceListSteal(virSCSIDeviceListPtr list,
virSCSIDevicePtr dev);
void virSCSIDeviceListDel(virSCSIDeviceListPtr list,
- virSCSIDevicePtr dev);
+ virSCSIDevicePtr dev,
+ const char *name);
virSCSIDevicePtr virSCSIDeviceListFind(virSCSIDeviceListPtr list,
virSCSIDevicePtr dev);
--
1.8.1.4
More information about the libvir-list
mailing list