[libvirt] [PATCHv2 17/17] qemu: support new pci controller model "pcie-switch-downstream-port"

John Ferlan jferlan at redhat.com
Thu Jul 23 14:49:34 UTC 2015



On 07/17/2015 02:43 PM, Laine Stump wrote:
> This is backed by the qemu device xio3130-downstream. It can only be
> connected to a pcie-switch-upstream-port (x3130-upstream) on the
> upstream side.
> ---
> V2:
> 
> * change test case to reflect additional pcie-root-port between
>   pcie-root and pcie-switch-upstream-port and add a 2nd switch that is
>   connected to a downstream port of the 1st switch.
> 
>  src/qemu/qemu_command.c                            | 42 ++++++++++++++++++++++
>  .../qemuxml2argv-pcie-switch-downstream-port.args  | 18 ++++++++++
>  tests/qemuxml2argvtest.c                           |  9 +++++
>  3 files changed, 69 insertions(+)
>  create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pcie-switch-downstream-port.args
> 
> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
> index e3f0663..155a94a 100644
> --- a/src/qemu/qemu_command.c
> +++ b/src/qemu/qemu_command.c
> @@ -1610,6 +1610,12 @@ qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
>                   */
>                  flags = VIR_PCI_CONNECT_TYPE_PCIE_PORT;
>                  break;
> +            case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT:
> +                /* pcie-switch-downstream-port can only connect to a
> +                 * pcie-switch-upstream-port, and can't be hot-plugged.
> +                 */
> +                flags = VIR_PCI_CONNECT_TYPE_PCIE_SWITCH;
> +                break;
>              default:
>                  break;
>              }
> @@ -2292,6 +2298,13 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
>                          deviceName = "x3130-upstream";
>                      break;
>                  case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT:
> +                    if (!options->type)
> +                        deviceName = "xio3130-downstream";
> +                    if (options->chassis == -1)
> +                       options->chassis = cont->idx;
> +                    if (options->port == -1)
> +                       options->port = addr->slot;
> +                    break;
>                  case VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT:
>                  case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT:
>                  case VIR_DOMAIN_CONTROLLER_MODEL_PCI_LAST:
> @@ -2416,6 +2429,10 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
>                   */
>                  flags = VIR_PCI_CONNECT_TYPE_PCIE_PORT;
>                  break;
> +            case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT:
> +                /* pcie-switch-port can only plug into pcie-switch */
> +                flags = VIR_PCI_CONNECT_TYPE_PCIE_SWITCH;
> +                break;
>              default:
>                  flags = VIR_PCI_CONNECT_HOTPLUGGABLE | VIR_PCI_CONNECT_TYPE_PCI;
>                  break;
> @@ -4766,6 +4783,31 @@ qemuBuildControllerDevStr(virDomainDefPtr domainDef,
>              virBufferAsprintf(&buf, "%s,id=%s",
>                                def->opts.pciopts.type, def->info.alias);
>              break;
> +        case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT:
> +            if (!def->opts.pciopts.type) {
> +                virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> +                               _("autogenerated pcie-switch-downstream-port "
> +                                 "options not set"));
> +                goto error;
> +            }
> +            if (STREQ(def->opts.pciopts.type, "xio3130-downstream")) {
> +                if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM)) {
> +                    virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
> +                                   _("The pcie-switch-downstream-port "
> +                                     "(xio3130-downstream) controller "
> +                                     "is not supported in this QEMU binary"));
> +                goto error;
> +                }
> +            } else {
> +                virReportError(VIR_ERR_INTERNAL_ERROR,
> +                               _("unknown pcie-switch-downstream-port device '%s'"),

similar to previous

unknown pci-switch-downstream-port option model '%s'

Of course perhaps all solveable by the enum type rather than string.


John
> +                               def->opts.pciopts.type);
> +                goto error;
> +            }
> +            virBufferAsprintf(&buf, "%s,port=0x%x,chassis=%d,id=%s",
> +                              def->opts.pciopts.type, def->opts.pciopts.port,
> +                              def->opts.pciopts.chassis, def->info.alias);
> +            break;
>          }
>          break;
>  
> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-pcie-switch-downstream-port.args b/tests/qemuxml2argvdata/qemuxml2argv-pcie-switch-downstream-port.args
> new file mode 100644
> index 0000000..fefefa2
> --- /dev/null
> +++ b/tests/qemuxml2argvdata/qemuxml2argv-pcie-switch-downstream-port.args
> @@ -0,0 +1,18 @@
> +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \
> +/usr/libexec/qemu-kvm -S -M q35 -m 2048 -smp 2 -nographic -nodefaults \
> +-monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \
> +-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
> +-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x1 \
> +-device ioh3420,port=0x10,chassis=3,id=pci.3,bus=pcie.0,addr=0x2 \
> +-device x3130-upstream,id=pci.4,bus=pci.3,addr=0x0 \
> +-device xio3130-downstream,port=0x0,chassis=5,id=pci.5,bus=pci.4,addr=0x0 \
> +-device xio3130-downstream,port=0x1,chassis=6,id=pci.6,bus=pci.4,addr=0x1 \
> +-device xio3130-downstream,port=0x2,chassis=7,id=pci.7,bus=pci.4,addr=0x2 \
> +-device xio3130-downstream,port=0x27,chassis=30,id=pci.8,bus=pci.4,addr=0x3 \
> +-device x3130-upstream,id=pci.9,bus=pci.5,addr=0x0 \
> +-device xio3130-downstream,port=0x4,chassis=10,id=pci.10,bus=pci.4,addr=0x4 \
> +-device xio3130-downstream,port=0x5,chassis=11,id=pci.11,bus=pci.4,addr=0x5 \
> +-device xio3130-downstream,port=0x6,chassis=12,id=pci.12,bus=pci.4,addr=0x6 \
> +-drive file=/dev/HostVG/QEMUGuest1,if=none,id=drive-sata0-0-0 \
> +-device ide-drive,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0 \
> +-vga qxl -global qxl-vga.ram_size=67108864 -global qxl-vga.vram_size=33554432
> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c
> index b42d483..287df6a 100644
> --- a/tests/qemuxml2argvtest.c
> +++ b/tests/qemuxml2argvtest.c
> @@ -1512,6 +1512,15 @@ mymain(void)
>              QEMU_CAPS_DRIVE, QEMU_CAPS_ICH9_AHCI,
>              QEMU_CAPS_VGA, QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
>              QEMU_CAPS_VGA, QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
> +    DO_TEST("pcie-switch-downstream-port",
> +            QEMU_CAPS_DEVICE, QEMU_CAPS_DEVICE_PCI_BRIDGE,
> +            QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
> +            QEMU_CAPS_DEVICE_IOH3420,
> +            QEMU_CAPS_DEVICE_X3130_UPSTREAM,
> +            QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
> +            QEMU_CAPS_DRIVE, QEMU_CAPS_ICH9_AHCI,
> +            QEMU_CAPS_VGA, QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
> +            QEMU_CAPS_VGA, QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
>  
>      DO_TEST("hostdev-scsi-lsi", QEMU_CAPS_DRIVE,
>              QEMU_CAPS_DEVICE, QEMU_CAPS_DRIVE,
> 




More information about the libvir-list mailing list