[libvirt] [PATCH] qemu: fix the audit log is not correct after hot-plug memory success

lhuang lhuang at redhat.com
Mon Jul 27 09:07:46 UTC 2015


On 07/24/2015 08:14 PM, John Ferlan wrote:
>
> On 07/17/2015 04:52 AM, Luyao Huang wrote:
>> https://bugzilla.redhat.com/show_bug.cgi?id=1226234#c3
>>
>> After hot-plug a memory device success, the audit log show
>> that memory update failed:
>>
>> type=VIRT_RESOURCE ... old-mem=1024000 new-mem=1548288 \
>> exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=pts/2 res=failed
>>
>> This is because the ret is still -1 when we call audit function to help
>>
>> Also we need audit when hot-plug/hot-unplug get failed in qemu side.
>> And i notice we use virDomainDefGetMemoryActual to get the newmem
>> , but when we failed to attach the memory device we the virDomainDefGetMemoryActual
>> will still output the oldmem size, so the audit log will not right
>> in that case.
>>
>> Signed-off-by: Luyao Huang <lhuang at redhat.com>
>> ---
>>   src/qemu/qemu_hotplug.c | 30 +++++++++++++-----------------
>>   1 file changed, 13 insertions(+), 17 deletions(-)
>>
> Since it's two issues there should be two patches

OKay, i will split them in two patches, thanks your advise.

>> diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
>> index 1ea397f..cf7ffa9 100644
>> --- a/src/qemu/qemu_hotplug.c
>> +++ b/src/qemu/qemu_hotplug.c
>> @@ -1745,6 +1745,7 @@ qemuDomainAttachMemory(virQEMUDriverPtr driver,
>>       qemuDomainObjPrivatePtr priv = vm->privateData;
>>       virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
>>       unsigned long long oldmem = virDomainDefGetMemoryActual(vm->def);
>> +    unsigned long long newmem = oldmem + mem->size;
>>       char *devstr = NULL;
>>       char *objalias = NULL;
>>       const char *backendType;
>> @@ -1800,7 +1801,7 @@ qemuDomainAttachMemory(virQEMUDriverPtr driver,
> Above this line, if there's a failure from virDomainMemoryInsert, the
> code goes to cleanup.  Should that audit failure too?

Actually i still not know the audit rules of "attach some device but get 
fail", and i notice the old function (attach disk,network....): these 
functions will audit the failure when there is a failure when qemu get 
fail, and won't audit the failure before qemuDomainObjEnterMonitor(). So 
in my opinion if there's a failure from virDomainMemoryInsert, no need 
audit failure, because we still not really try to attach such device :)

>>       if (qemuDomainObjExitMonitor(driver, vm) < 0) {
>>           /* we shouldn't touch mem now, as the def might be freed */
>>           mem = NULL;
>> -        goto cleanup;
>> +        goto audit;
>>       }
>>   
>>       event = virDomainEventDeviceAddedNewFromObj(vm, objalias);
>> @@ -1811,9 +1812,6 @@ qemuDomainAttachMemory(virQEMUDriverPtr driver,
>>       if (fix_balloon)
>>           vm->def->mem.cur_balloon += mem->size;
>>   
>> -    virDomainAuditMemory(vm, oldmem, virDomainDefGetMemoryActual(vm->def),
>> -                         "update", ret == 0);
>> -
> An alternative method would be to :
>
>
>      if ((ret = qemuMonitorAddDevice(priv->mon, devstr)) < 0) {
> ...
>      }
>
>      if (qemuDomainObjExitMonitor(driver, vm) < 0) {
>           /* we shouldn't touch mem now, as the def might be freed */
>           mem = NULL;
>           ret = -1;
>      }
>
>      virDomainAuditMemory(vm, oldmem, newmem, "update", ret == 0);
>      if (ret < 0)
>          goto cleanup;
>
> FWIW:
> It seems "many" paths in the code will fail to audit if ExitMonitor
> fails. There's no "consensus" as to the best mechanism. Although the
> AuditNet's and most AuditChardev do at least try. The calls around
> AuditHostdev are close, but the set ret = -1 and jump to cleanup before
> audit which has a jump to cleanup if ret == -1.
>
> Cleanup of those is something for another day it seems though...

Some of them is easy to fix but some for them is hard to fix (need 
refactor functions), we could fix them later ;)

>>       /* mem is consumed by vm->def */
>>       mem = NULL;
>>   
>> @@ -1823,6 +1821,8 @@ qemuDomainAttachMemory(virQEMUDriverPtr driver,
>>   
>>       ret = 0;
>>   
>> + audit:
>> +    virDomainAuditMemory(vm, oldmem, newmem, "update", ret == 0);
>>    cleanup:
>>       virObjectUnref(cfg);
>>       VIR_FREE(devstr);
>> @@ -1833,7 +1833,7 @@ qemuDomainAttachMemory(virQEMUDriverPtr driver,
>>    removedef:
> Rather than mess with the goto audit changes here, why not just :
>
>      virDomainAuditMemory(vm, oldmem, newmem, "update", false);
>
>
> See qemuDomainChangeEjectableMedia for precedent.

Hmm...but then i need 3 virDomainAuditMemory() functions:

     if ((ret = qemuMonitorAddDevice(priv->mon, devstr)) < 0) {
...
     }

     if (qemuDomainObjExitMonitor(driver, vm) < 0) {
          /* we shouldn't touch mem now, as the def might be freed */
          mem = NULL;
          ret = -1;
     }

     virDomainAuditMemory(vm, oldmem, newmem, "update", ret == 0);   <---- one
     if (ret < 0)
         goto cleanup;

...

  removedef:
     if (qemuDomainObjExitMonitor(driver, vm) < 0) {
         mem = NULL;
         virDomainAuditMemory(vm, oldmem, newmem, "update", false); <---two
         goto cleanup;
     }

     if ((id = virDomainMemoryFindByDef(vm->def, mem)) >= 0)
         mem = virDomainMemoryRemove(vm->def, id);
     else
         mem = NULL;

     virDomainAuditMemory(vm, oldmem, newmem, "update", false); <----three
     goto cleanup;


It looks a little tedious for me, how about you ? :)

>>       if (qemuDomainObjExitMonitor(driver, vm) < 0) {
>>           mem = NULL;
>> -        goto cleanup;
>> +        goto audit;
>>       }
>>   
>>       if ((id = virDomainMemoryFindByDef(vm->def, mem)) >= 0)
>> @@ -1841,7 +1841,7 @@ qemuDomainAttachMemory(virQEMUDriverPtr driver,
>>       else
>>           mem = NULL;
>>   
>> -    goto cleanup;
>> +    goto audit;
>>   }
>>   
>>   
> The following should be a separate patch... So patch#1 fixes attach and
> #2 fixes remove

Okay

>> @@ -2904,11 +2904,11 @@ qemuDomainRemoveMemoryDevice(virQEMUDriverPtr driver,
>>   {
>>       qemuDomainObjPrivatePtr priv = vm->privateData;
>>       unsigned long long oldmem = virDomainDefGetMemoryActual(vm->def);
>> +    unsigned long long newmem = oldmem - mem->size;
>>       virObjectEventPtr event;
>>       char *backendAlias = NULL;
>>       int rc;
>>       int idx;
>> -    int ret = -1;
> Don't delete this
>
>>   
>>       VIR_DEBUG("Removing memory device %s from domain %p %s",
>>                 mem->info.alias, vm, vm->def->name);
>> @@ -2917,27 +2917,23 @@ qemuDomainRemoveMemoryDevice(virQEMUDriverPtr driver,
>>           qemuDomainEventQueue(driver, event);
>>   
>>       if (virAsprintf(&backendAlias, "mem%s", mem->info.alias) < 0)
>> -        goto cleanup;
>> +        return -1;
> Drop this change
>
>>   
>>       qemuDomainObjEnterMonitor(driver, vm);
>>       rc = qemuMonitorDelObject(priv->mon, backendAlias);
>> +    VIR_FREE(backendAlias);
> drop this change
>
>>       if (qemuDomainObjExitMonitor(driver, vm) < 0 || rc < 0)
>> -        goto cleanup;
>> +        return -1;
> Modify the above to:
>       rc = qemuMonitorDelObject(priv->mon, backendAlias);
>       if (qemuDomainObjExitMonitor(driver, vm) < 0)
>           rc = -1;
>
>       virDomainAuditMemory(vm, oldmem, newmem, "update", rc == 0);
>       if (rc < 0)
>          goto cleanup;

Okay, i agree with your idea, and i think we can remove 'ret' and just 
return 'rc', so...

>>   
>>       vm->def->mem.cur_balloon -= mem->size;
>>   
>> +    virDomainAuditMemory(vm, oldmem, newmem, "update", rc == 0);
>> +
> This moved up...
>
>>       if ((idx = virDomainMemoryFindByDef(vm->def, mem)) >= 0)
>>           virDomainMemoryRemove(vm->def, idx);
>>   
>>       virDomainMemoryDefFree(mem);
>> -    ret = 0;
>> -
>> - cleanup:
>> -    virDomainAuditMemory(vm, oldmem, virDomainDefGetMemoryActual(vm->def),
>> -                         "update", ret == 0);
>> -
>> -    VIR_FREE(backendAlias);
>> -    return ret;
>> +    return 0;
> Leaving the above hunk as:
>
>      ret = 0;
>
>   cleanup:
>      VIR_FREE(backendAlias);
>      return ret;
> }

...these place will be:

     virDomainMemoryDefFree(mem);

  cleanup:
     VIR_FREE(backendAlias);
     return rc;

And during fix this i have found another way which could remove ret and 
cleanup:
/
/    qemuDomainObjEnterMonitor(driver, vm);
     rc = qemuMonitorDelObject(priv->mon, backendAlias);
     if (qemuDomainObjExitMonitor(driver, vm) < 0)
         rc = -1;

     VIR_FREE(backendAlias);

     virDomainAuditMemory(vm, oldmem, newmem, "update", rc == 0);
     if (rc < 0)
         return -1;

     vm->def->mem.cur_balloon -= mem->size;

     if ((idx = virDomainMemoryFindByDef(vm->def, mem)) >= 0)
         virDomainMemoryRemove(vm->def, idx);

     virDomainMemoryDefFree(mem);
     return 0;


Thanks a lot for your review and help.

>
> John

Luyao

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/libvir-list/attachments/20150727/00419d2f/attachment-0001.htm>


More information about the libvir-list mailing list