[libvirt] [PATCH] Fix virsh edit and virt-xml-validate with SCSI LUN

John Ferlan jferlan at redhat.com
Fri Jun 12 20:49:17 UTC 2015



On 06/10/2015 11:22 AM, Eric Farman wrote:
> Defining a domain with a SCSI disk attached via a hostdev
> tag and a source address unit value longer than two digits
> causes an error when editing the domain with virsh edit,
> even if no changes are made to the domain definition.
> The error suggests invalid XML, somewhere:
> 
>   # virsh edit lmb_guest
>   error: XML document failed to validate against schema:
>   Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng
>   Extra element devices in interleave
>   Element domain failed to validate content
> 
> The virt-xml-validate tool fails with a similar error:
> 
>   # virt-xml-validate lmb_guest.xml
>   Relax-NG validity error : Extra element devices in interleave
>   lmb_guest.xml:17: element devices: Relax-NG validity error :
>   Element domain failed to validate content
>   lmb_guest.xml fails to validate
> 
> The hostdev tag requires a source address to be specified,
> which includes bus, target, and unit address attributes.
> According to the SCSI Architecture Model spec (section
> 4.9 of SAM-2), a LUN address is 64 bits and thus could be
> up to 20 decimal digits long.  Unfortunately, the XML
> schema limits this string to just two digits.  Similarly,
> the target field can be up to 32 bits in length, which
> would be 10 decimal digits.
> 
>   # lsscsi -xx
>   [0:0:19:0x4022401100000000]  disk    IBM      2107900          3.44 /dev/sda
>   # lsscsi
>   [0:0:19:1074872354]disk    IBM      2107900          3.44  /dev/sda
>   # cat lmb_guest.xml
>   <domain type='kvm'>
>     <name>lmb_guest</name>
>     <memory unit='MiB'>1024</memory>
>   ...trimmed...
>     <devices>
>       <controller type='scsi' model='virtio-scsi' index='0'/>
>       <hostdev mode='subsystem' type='scsi'>
>         <source>
>           <adapter name='scsi_host0'/>
>           <address bus='0' target='19' unit='1074872354'/>
>         </source>
>       </hostdev>
>   ...trimmed...
> 
> Since the reference unit and target fields are used in
> several places in the XML schema, create a separate one
> specific for SCSI Logical Units that will permit the
> greater length.  Also, expand the definition of the SCSI
> unit field from an int to a long long, to cover the
> possible size. This permits both the validation utility
> and the virsh edit command to succeed when a hostdev
> tag is included.
> 

Nice explanation - helped set the stage quite well!

Of course you've just opened Pandora's box of questions...

> Signed-off-by: Eric Farman <farman at linux.vnet.ibm.com>
> Reviewed-by: Matthew Rosato <mjrosato at linux.vnet.ibm.com>
> Reviewed-by: Stefan Zimmermann <stzi at linux.vnet.ibm.com>
> Reviewed-by: Boris Fiuczynski <fiuczy at linux.vnet.ibm.com>
> ---
>  docs/formatdomain.html.in     | 10 +++++++---
>  docs/schemas/domaincommon.rng | 14 ++++++++++++--
>  src/conf/domain_audit.c       |  2 +-
>  src/conf/domain_conf.c        |  4 ++--
>  src/conf/domain_conf.h        |  2 +-
>  src/qemu/qemu_command.h       |  2 +-
>  src/qemu/qemu_hotplug.c       |  4 ++--
>  src/util/virhostdev.c         |  6 +++---
>  src/util/virscsi.c            | 16 ++++++++--------
>  src/util/virscsi.h            |  8 ++++----
>  tests/testutilsqemu.c         |  2 +-
>  tools/virsh-domain.c          |  6 +++---
>  12 files changed, 45 insertions(+), 31 deletions(-)
> 

Need to add some XML in order to "test" the longer values - eg, xml2xml
and/or xml2args in order to validate that what you read in is what gets
printed out and that what you read in gets sent to the hypervisor
correctly.  <me> wonders what qemu dos with a 20 digit unit number...

So speaking of qemu... If you look at qemuBuildDriveStr you will see how
the device address is passed down to qemu... That function needs some
adjustment too it seems.

I didn't dig into the qemu sources yet, but

> diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
> index 1781996..e7a8e1a 100644
> --- a/docs/formatdomain.html.in
> +++ b/docs/formatdomain.html.in
> @@ -2827,7 +2827,7 @@
>        <dd>Drive addresses have the following additional
>          attributes: <code>controller</code> (a 2-digit controller
>          number), <code>bus</code> (a 2-digit bus number),
> -        <code>target</code> (a 2-digit bus number),
> +        <code>target</code> (a 2-digit target number),
>          and <code>unit</code> (a 2-digit unit number on the bus).
>        </dd>
>        <dt><code>type='virtio-serial'</code></dt>

Interesting there's no 'scsi' in here (of course you're removing it
below, but that leaves the address as unknown


> @@ -3136,7 +3136,7 @@
>      <hostdev mode='subsystem' type='scsi' sgio='filtered' rawio='yes'>
>        <source>
>          <adapter name='scsi_host0'/>
> -        <address type='scsi' bus='0' target='0' unit='0'/>
> +        <address bus='0' target='0' unit='0'/>

These first two don't seem relevant to the changes below and should have
been their own patch.

See [1] below for a side comment on this particular changes

>        </source>
>        <readonly/>
>        <address type='drive' controller='0' bus='0' target='0' unit='0'/>
> @@ -3244,7 +3244,11 @@
>            </dd>
>            <dt>scsi</dt>
>            <dd>SCSI devices are described by both the <code>adapter</code>
> -            and <code>address</code> elements.
> +            and <code>address</code> elements. The <code>address</code>
> +            element includes a <code>bus</code> attribute (a 2-digit bus
> +            number), a <code>target</code> attribute (a 10-digit target
> +            number), and a <code>unit</code> attribute (a 20-digit unit
> +            number on the bus).
>              <p>
>              <span class="since">Since 1.2.8</span>, the <code>source</code>
>              element of a SCSI device may contain the <code>protocol</code>
> diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
> index 5dc48f7..dccd3fd 100644
> --- a/docs/schemas/domaincommon.rng
> +++ b/docs/schemas/domaincommon.rng
> @@ -3846,10 +3846,10 @@
>        <ref name="driveBus"/>
>      </attribute>
>      <attribute name="target">
> -      <ref name="driveTarget"/>
> +      <ref name="driveSCSITarget"/>
>      </attribute>
>      <attribute name="unit">
> -      <ref name="driveUnit"/>
> +      <ref name="driveSCSIUnit"/>
>      </attribute>
>    </define>
>    <define name="usbportaddress">
> @@ -5142,11 +5142,21 @@
>        <param name="pattern">[0-9]{1,2}</param>
>      </data>
>    </define>
> +  <define name="driveSCSITarget">
> +    <data type="string">
> +      <param name="pattern">[0-9]{1,10}</param>
> +    </data>
> +  </define>
>    <define name="driveUnit">
>      <data type="string">
>        <param name="pattern">[0-9]{1,2}</param>
>      </data>
>    </define>
> +  <define name="driveSCSIUnit">
> +    <data type="string">
> +      <param name="pattern">[0-9]{1,20}</param>
> +    </data>
> +  </define>
>    <define name="featureName">
>      <data type="string">
>        <param name='pattern'>[a-zA-Z0-9\-_\.]+</param>
> diff --git a/src/conf/domain_audit.c b/src/conf/domain_audit.c
> index 1900039..844297c 100644
> --- a/src/conf/domain_audit.c
> +++ b/src/conf/domain_audit.c
> @@ -427,7 +427,7 @@ virDomainAuditHostdev(virDomainObjPtr vm, virDomainHostdevDefPtr hostdev,
>              } else {
>                  virDomainHostdevSubsysSCSIHostPtr scsihostsrc =
>                      &scsisrc->u.host;
> -                if (virAsprintfQuiet(&address, "%s:%d:%d:%d",
> +                if (virAsprintfQuiet(&address, "%s:%d:%d:%lld",
>                                       scsihostsrc->adapter, scsihostsrc->bus,
>                                       scsihostsrc->target,
>                                       scsihostsrc->unit) < 0) {
> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
> index 36de844..1f2bfca 100644
> --- a/src/conf/domain_conf.c
> +++ b/src/conf/domain_conf.c
> @@ -4954,7 +4954,7 @@ virDomainHostdevSubsysSCSIHostDefParseXML(xmlNodePtr sourcenode,
>                      goto cleanup;
>                  }
>  
> -                if (virStrToLong_ui(unit, NULL, 0, &scsihostsrc->unit) < 0) {
> +                if (virStrToLong_ull(unit, NULL, 0, &scsihostsrc->unit) < 0) {
>                      virReportError(VIR_ERR_INTERNAL_ERROR,
>                                     _("cannot parse unit '%s'"), unit);

Existing - read as "ui" (or now "ull"), but could be "uip" and "ullp"
(eg, don't allow reading a negative value).

I would be remiss if I didn't point out UINT_MAX is 4294967295U, which
is 10 digits, but means 9999999999 which would be 'valid' according to
the 10 digit rule in RNG but invalid once you read it in...

>                      goto cleanup;
> @@ -18844,7 +18844,7 @@ virDomainHostdevDefFormatSubsys(virBufferPtr buf,
>              virBufferAsprintf(buf, "<adapter name='%s'/>\n",
>                                scsihostsrc->adapter);
>              virBufferAsprintf(buf,
> -                              "<address %sbus='%d' target='%d' unit='%d'/>\n",
> +                              "<address %sbus='%d' target='%d' unit='%lld'/>\n",
>                                includeTypeInAddr ? "type='scsi' " : "",

Printed as "%d" not "%u" (of course that only means something for -1...
 Without even considering the math, my eyes saw the commit message
"unit='1074872354'" and I immediately thought - is this one of those
negative value type issues...

BTW: I wonder if this deserves a patch prior to this to use _uip and
avoid negative values and a second patch to change the formatting of %d
to %u.

[1] Doesn't this provide an example of the 2nd of the two
formatdomain.html.in changes you made?  That is you removed having
'scsi' in the "<address...", but this shows that it is printed....

It seems you've covered most of the various areas. It may be easier to
review them if they were smaller units. When I started reading this, I
figured this wouldn't be too bad, but the more I dug and thought I had
more questions.

I wanted to provide some feedback before I had to stop reading code for
the day/weekend and perhaps see where this goes from here. Maybe I'm
reading too much into it.

John
>                                scsihostsrc->bus, scsihostsrc->target,
>                                scsihostsrc->unit);
> diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
> index ba17a8d..f677c2e 100644
> --- a/src/conf/domain_conf.h
> +++ b/src/conf/domain_conf.h
> @@ -463,7 +463,7 @@ struct _virDomainHostdevSubsysSCSIHost {
>      char *adapter;
>      unsigned bus;
>      unsigned target;
> -    unsigned unit;
> +    unsigned long long unit;
>  };
>  
>  typedef struct _virDomainHostdevSubsysSCSIiSCSI virDomainHostdevSubsysSCSIiSCSI;
> diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h
> index 0fc59a8..6e0c3a3 100644
> --- a/src/qemu/qemu_command.h
> +++ b/src/qemu/qemu_command.h
> @@ -63,7 +63,7 @@ struct _qemuBuildCommandLineCallbacks {
>                                        const char *adapter,
>                                        unsigned int bus,
>                                        unsigned int target,
> -                                      unsigned int unit);
> +                                      unsigned long long unit);
>  };
>  
>  extern qemuBuildCommandLineCallbacks buildCommandLineCallbacks;
> diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
> index 3562de6..bbdf0b0 100644
> --- a/src/qemu/qemu_hotplug.c
> +++ b/src/qemu/qemu_hotplug.c
> @@ -1938,7 +1938,7 @@ qemuDomainAttachHostSCSIDevice(virConnectPtr conn,
>          } else {
>              virDomainHostdevSubsysSCSIHostPtr scsihostsrc = &scsisrc->u.host;
>              virReportError(VIR_ERR_INTERNAL_ERROR,
> -                           _("Unable to prepare scsi hostdev: %s:%d:%d:%d"),
> +                           _("Unable to prepare scsi hostdev: %s:%d:%d:%lld"),
>                             scsihostsrc->adapter, scsihostsrc->bus,
>                             scsihostsrc->target, scsihostsrc->unit);
>          }
> @@ -3882,7 +3882,7 @@ int qemuDomainDetachHostDevice(virQEMUDriverPtr driver,
>                   virDomainHostdevSubsysSCSIHostPtr scsihostsrc =
>                       &scsisrc->u.host;
>                   virReportError(VIR_ERR_OPERATION_FAILED,
> -                                _("host scsi device %s:%d:%d.%d not found"),
> +                                _("host scsi device %s:%d:%d:%lld not found"),
>                                  scsihostsrc->adapter, scsihostsrc->bus,
>                                  scsihostsrc->target, scsihostsrc->unit);
>              }
> diff --git a/src/util/virhostdev.c b/src/util/virhostdev.c
> index 1c8f31e..e67fe18 100644
> --- a/src/util/virhostdev.c
> +++ b/src/util/virhostdev.c
> @@ -1482,7 +1482,7 @@ virHostdevReAttachSCSIHostDevices(virHostdevManagerPtr hostdev_mgr,
>                                    scsihostsrc->adapter, scsihostsrc->bus,
>                                    scsihostsrc->target, scsihostsrc->unit,
>                                    hostdev->readonly, hostdev->shareable))) {
> -        VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%d on domain %s",
> +        VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%lld on domain %s",
>                   scsihostsrc->adapter, scsihostsrc->bus, scsihostsrc->target,
>                   scsihostsrc->unit, dom_name);
>          return;
> @@ -1492,7 +1492,7 @@ virHostdevReAttachSCSIHostDevices(virHostdevManagerPtr hostdev_mgr,
>       * because qemuProcessStart could fail half way through. */
>  
>      if (!(tmp = virSCSIDeviceListFind(hostdev_mgr->activeSCSIHostdevs, scsi))) {
> -        VIR_WARN("Unable to find device %s:%d:%d:%d "
> +        VIR_WARN("Unable to find device %s:%d:%d:%lld "
>                   "in list of active SCSI devices",
>                   scsihostsrc->adapter, scsihostsrc->bus,
>                   scsihostsrc->target, scsihostsrc->unit);
> @@ -1500,7 +1500,7 @@ virHostdevReAttachSCSIHostDevices(virHostdevManagerPtr hostdev_mgr,
>          return;
>      }
>  
> -    VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeSCSIHostdevs",
> +    VIR_DEBUG("Removing %s:%d:%d:%lld dom=%s from activeSCSIHostdevs",
>                 scsihostsrc->adapter, scsihostsrc->bus, scsihostsrc->target,
>                 scsihostsrc->unit, dom_name);
>  
> diff --git a/src/util/virscsi.c b/src/util/virscsi.c
> index 9f5cf0d..5fd4380 100644
> --- a/src/util/virscsi.c
> +++ b/src/util/virscsi.c
> @@ -56,7 +56,7 @@ struct _virSCSIDevice {
>      unsigned int adapter;
>      unsigned int bus;
>      unsigned int target;
> -    unsigned int unit;
> +    unsigned long long unit;
>  
>      char *name; /* adapter:bus:target:unit */
>      char *id;   /* model:vendor */
> @@ -110,7 +110,7 @@ virSCSIDeviceGetSgName(const char *sysfs_prefix,
>                         const char *adapter,
>                         unsigned int bus,
>                         unsigned int target,
> -                       unsigned int unit)
> +                       unsigned long long unit)
>  {
>      DIR *dir = NULL;
>      struct dirent *entry;
> @@ -123,7 +123,7 @@ virSCSIDeviceGetSgName(const char *sysfs_prefix,
>          return NULL;
>  
>      if (virAsprintf(&path,
> -                    "%s/%d:%d:%d:%d/scsi_generic",
> +                    "%s/%d:%d:%d:%lld/scsi_generic",
>                      prefix, adapter_id, bus, target, unit) < 0)
>          return NULL;
>  
> @@ -157,7 +157,7 @@ virSCSIDeviceGetDevName(const char *sysfs_prefix,
>                          const char *adapter,
>                          unsigned int bus,
>                          unsigned int target,
> -                        unsigned int unit)
> +                        unsigned long long unit)
>  {
>      DIR *dir = NULL;
>      struct dirent *entry;
> @@ -170,7 +170,7 @@ virSCSIDeviceGetDevName(const char *sysfs_prefix,
>          return NULL;
>  
>      if (virAsprintf(&path,
> -                    "%s/%d:%d:%d:%d/block",
> +                    "%s/%d:%d:%d:%lld/block",
>                      prefix, adapter_id, bus, target, unit) < 0)
>          return NULL;
>  
> @@ -200,7 +200,7 @@ virSCSIDeviceNew(const char *sysfs_prefix,
>                   const char *adapter,
>                   unsigned int bus,
>                   unsigned int target,
> -                 unsigned int unit,
> +                 unsigned long long unit,
>                   bool readonly,
>                   bool shareable)
>  {
> @@ -227,7 +227,7 @@ virSCSIDeviceNew(const char *sysfs_prefix,
>      if (virSCSIDeviceGetAdapterId(adapter, &dev->adapter) < 0)
>          goto cleanup;
>  
> -    if (virAsprintf(&dev->name, "%d:%d:%d:%d", dev->adapter,
> +    if (virAsprintf(&dev->name, "%d:%d:%d:%lld", dev->adapter,
>                      dev->bus, dev->target, dev->unit) < 0 ||
>          virAsprintf(&dev->sg_path, "%s/%s",
>                      sysfs_prefix ? sysfs_prefix : "/dev", sg) < 0)
> @@ -347,7 +347,7 @@ virSCSIDeviceGetTarget(virSCSIDevicePtr dev)
>      return dev->target;
>  }
>  
> -unsigned int
> +unsigned long long
>  virSCSIDeviceGetUnit(virSCSIDevicePtr dev)
>  {
>      return dev->unit;
> diff --git a/src/util/virscsi.h b/src/util/virscsi.h
> index c67837f..df40d7f 100644
> --- a/src/util/virscsi.h
> +++ b/src/util/virscsi.h
> @@ -37,18 +37,18 @@ char *virSCSIDeviceGetSgName(const char *sysfs_prefix,
>                               const char *adapter,
>                               unsigned int bus,
>                               unsigned int target,
> -                             unsigned int unit);
> +                             unsigned long long unit);
>  char *virSCSIDeviceGetDevName(const char *sysfs_prefix,
>                                const char *adapter,
>                                unsigned int bus,
>                                unsigned int target,
> -                              unsigned int unit);
> +                              unsigned long long unit);
>  
>  virSCSIDevicePtr virSCSIDeviceNew(const char *sysfs_prefix,
>                                    const char *adapter,
>                                    unsigned int bus,
>                                    unsigned int target,
> -                                  unsigned int unit,
> +                                  unsigned long long unit,
>                                    bool readonly,
>                                    bool shareable);
>  
> @@ -61,7 +61,7 @@ const char *virSCSIDeviceGetName(virSCSIDevicePtr dev);
>  unsigned int virSCSIDeviceGetAdapter(virSCSIDevicePtr dev);
>  unsigned int virSCSIDeviceGetBus(virSCSIDevicePtr dev);
>  unsigned int virSCSIDeviceGetTarget(virSCSIDevicePtr dev);
> -unsigned int virSCSIDeviceGetUnit(virSCSIDevicePtr dev);
> +unsigned long long virSCSIDeviceGetUnit(virSCSIDevicePtr dev);
>  bool virSCSIDeviceGetReadonly(virSCSIDevicePtr dev);
>  bool virSCSIDeviceGetShareable(virSCSIDevicePtr dev);
>  
> diff --git a/tests/testutilsqemu.c b/tests/testutilsqemu.c
> index d067bca..ceaabb6 100644
> --- a/tests/testutilsqemu.c
> +++ b/tests/testutilsqemu.c
> @@ -462,7 +462,7 @@ testSCSIDeviceGetSgName(const char *sysfs_prefix ATTRIBUTE_UNUSED,
>                          const char *adapter ATTRIBUTE_UNUSED,
>                          unsigned int bus ATTRIBUTE_UNUSED,
>                          unsigned int target ATTRIBUTE_UNUSED,
> -                        unsigned int unit ATTRIBUTE_UNUSED)
> +                        unsigned long long unit ATTRIBUTE_UNUSED)
>  {
>      char *sg = NULL;
>  
> diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
> index 4c47473..aa4d58c 100644
> --- a/tools/virsh-domain.c
> +++ b/tools/virsh-domain.c
> @@ -415,7 +415,7 @@ struct PCIAddress {
>  struct SCSIAddress {
>      unsigned int controller;
>      unsigned int bus;
> -    unsigned int unit;
> +    unsigned long long unit;
>  };
>  
>  struct IDEAddress {
> @@ -488,7 +488,7 @@ static int str2SCSIAddress(const char *str, struct SCSIAddress *scsiAddr)
>          return -1;
>  
>      unit++;
> -    if (virStrToLong_ui(unit, NULL, 0, &scsiAddr->unit) != 0)
> +    if (virStrToLong_ull(unit, NULL, 0, &scsiAddr->unit) != 0)
>          return -1;
>  
>      return 0;
> @@ -725,7 +725,7 @@ cmdAttachDisk(vshControl *ctl, const vshCmd *cmd)
>              if (diskAddr.type == DISK_ADDR_TYPE_SCSI) {
>                  virBufferAsprintf(&buf,
>                                    "<address type='drive' controller='%d'"
> -                                  " bus='%d' unit='%d' />\n",
> +                                  " bus='%d' unit='%lld' />\n",
>                                    diskAddr.addr.scsi.controller, diskAddr.addr.scsi.bus,
>                                    diskAddr.addr.scsi.unit);
>              } else {
> 




More information about the libvir-list mailing list