[libvirt] [PATCH] Fix virsh edit and virt-xml-validate with SCSI LUN
Eric Farman
farman at linux.vnet.ibm.com
Wed Jun 10 15:22:02 UTC 2015
Defining a domain with a SCSI disk attached via a hostdev
tag and a source address unit value longer than two digits
causes an error when editing the domain with virsh edit,
even if no changes are made to the domain definition.
The error suggests invalid XML, somewhere:
# virsh edit lmb_guest
error: XML document failed to validate against schema:
Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng
Extra element devices in interleave
Element domain failed to validate content
The virt-xml-validate tool fails with a similar error:
# virt-xml-validate lmb_guest.xml
Relax-NG validity error : Extra element devices in interleave
lmb_guest.xml:17: element devices: Relax-NG validity error :
Element domain failed to validate content
lmb_guest.xml fails to validate
The hostdev tag requires a source address to be specified,
which includes bus, target, and unit address attributes.
According to the SCSI Architecture Model spec (section
4.9 of SAM-2), a LUN address is 64 bits and thus could be
up to 20 decimal digits long. Unfortunately, the XML
schema limits this string to just two digits. Similarly,
the target field can be up to 32 bits in length, which
would be 10 decimal digits.
# lsscsi -xx
[0:0:19:0x4022401100000000] disk IBM 2107900 3.44 /dev/sda
# lsscsi
[0:0:19:1074872354]disk IBM 2107900 3.44 /dev/sda
# cat lmb_guest.xml
<domain type='kvm'>
<name>lmb_guest</name>
<memory unit='MiB'>1024</memory>
...trimmed...
<devices>
<controller type='scsi' model='virtio-scsi' index='0'/>
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1074872354'/>
</source>
</hostdev>
...trimmed...
Since the reference unit and target fields are used in
several places in the XML schema, create a separate one
specific for SCSI Logical Units that will permit the
greater length. Also, expand the definition of the SCSI
unit field from an int to a long long, to cover the
possible size. This permits both the validation utility
and the virsh edit command to succeed when a hostdev
tag is included.
Signed-off-by: Eric Farman <farman at linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato at linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi at linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy at linux.vnet.ibm.com>
---
docs/formatdomain.html.in | 10 +++++++---
docs/schemas/domaincommon.rng | 14 ++++++++++++--
src/conf/domain_audit.c | 2 +-
src/conf/domain_conf.c | 4 ++--
src/conf/domain_conf.h | 2 +-
src/qemu/qemu_command.h | 2 +-
src/qemu/qemu_hotplug.c | 4 ++--
src/util/virhostdev.c | 6 +++---
src/util/virscsi.c | 16 ++++++++--------
src/util/virscsi.h | 8 ++++----
tests/testutilsqemu.c | 2 +-
tools/virsh-domain.c | 6 +++---
12 files changed, 45 insertions(+), 31 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 1781996..e7a8e1a 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -2827,7 +2827,7 @@
<dd>Drive addresses have the following additional
attributes: <code>controller</code> (a 2-digit controller
number), <code>bus</code> (a 2-digit bus number),
- <code>target</code> (a 2-digit bus number),
+ <code>target</code> (a 2-digit target number),
and <code>unit</code> (a 2-digit unit number on the bus).
</dd>
<dt><code>type='virtio-serial'</code></dt>
@@ -3136,7 +3136,7 @@
<hostdev mode='subsystem' type='scsi' sgio='filtered' rawio='yes'>
<source>
<adapter name='scsi_host0'/>
- <address type='scsi' bus='0' target='0' unit='0'/>
+ <address bus='0' target='0' unit='0'/>
</source>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
@@ -3244,7 +3244,11 @@
</dd>
<dt>scsi</dt>
<dd>SCSI devices are described by both the <code>adapter</code>
- and <code>address</code> elements.
+ and <code>address</code> elements. The <code>address</code>
+ element includes a <code>bus</code> attribute (a 2-digit bus
+ number), a <code>target</code> attribute (a 10-digit target
+ number), and a <code>unit</code> attribute (a 20-digit unit
+ number on the bus).
<p>
<span class="since">Since 1.2.8</span>, the <code>source</code>
element of a SCSI device may contain the <code>protocol</code>
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index 5dc48f7..dccd3fd 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -3846,10 +3846,10 @@
<ref name="driveBus"/>
</attribute>
<attribute name="target">
- <ref name="driveTarget"/>
+ <ref name="driveSCSITarget"/>
</attribute>
<attribute name="unit">
- <ref name="driveUnit"/>
+ <ref name="driveSCSIUnit"/>
</attribute>
</define>
<define name="usbportaddress">
@@ -5142,11 +5142,21 @@
<param name="pattern">[0-9]{1,2}</param>
</data>
</define>
+ <define name="driveSCSITarget">
+ <data type="string">
+ <param name="pattern">[0-9]{1,10}</param>
+ </data>
+ </define>
<define name="driveUnit">
<data type="string">
<param name="pattern">[0-9]{1,2}</param>
</data>
</define>
+ <define name="driveSCSIUnit">
+ <data type="string">
+ <param name="pattern">[0-9]{1,20}</param>
+ </data>
+ </define>
<define name="featureName">
<data type="string">
<param name='pattern'>[a-zA-Z0-9\-_\.]+</param>
diff --git a/src/conf/domain_audit.c b/src/conf/domain_audit.c
index 1900039..844297c 100644
--- a/src/conf/domain_audit.c
+++ b/src/conf/domain_audit.c
@@ -427,7 +427,7 @@ virDomainAuditHostdev(virDomainObjPtr vm, virDomainHostdevDefPtr hostdev,
} else {
virDomainHostdevSubsysSCSIHostPtr scsihostsrc =
&scsisrc->u.host;
- if (virAsprintfQuiet(&address, "%s:%d:%d:%d",
+ if (virAsprintfQuiet(&address, "%s:%d:%d:%lld",
scsihostsrc->adapter, scsihostsrc->bus,
scsihostsrc->target,
scsihostsrc->unit) < 0) {
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 36de844..1f2bfca 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -4954,7 +4954,7 @@ virDomainHostdevSubsysSCSIHostDefParseXML(xmlNodePtr sourcenode,
goto cleanup;
}
- if (virStrToLong_ui(unit, NULL, 0, &scsihostsrc->unit) < 0) {
+ if (virStrToLong_ull(unit, NULL, 0, &scsihostsrc->unit) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("cannot parse unit '%s'"), unit);
goto cleanup;
@@ -18844,7 +18844,7 @@ virDomainHostdevDefFormatSubsys(virBufferPtr buf,
virBufferAsprintf(buf, "<adapter name='%s'/>\n",
scsihostsrc->adapter);
virBufferAsprintf(buf,
- "<address %sbus='%d' target='%d' unit='%d'/>\n",
+ "<address %sbus='%d' target='%d' unit='%lld'/>\n",
includeTypeInAddr ? "type='scsi' " : "",
scsihostsrc->bus, scsihostsrc->target,
scsihostsrc->unit);
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index ba17a8d..f677c2e 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -463,7 +463,7 @@ struct _virDomainHostdevSubsysSCSIHost {
char *adapter;
unsigned bus;
unsigned target;
- unsigned unit;
+ unsigned long long unit;
};
typedef struct _virDomainHostdevSubsysSCSIiSCSI virDomainHostdevSubsysSCSIiSCSI;
diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h
index 0fc59a8..6e0c3a3 100644
--- a/src/qemu/qemu_command.h
+++ b/src/qemu/qemu_command.h
@@ -63,7 +63,7 @@ struct _qemuBuildCommandLineCallbacks {
const char *adapter,
unsigned int bus,
unsigned int target,
- unsigned int unit);
+ unsigned long long unit);
};
extern qemuBuildCommandLineCallbacks buildCommandLineCallbacks;
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index 3562de6..bbdf0b0 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -1938,7 +1938,7 @@ qemuDomainAttachHostSCSIDevice(virConnectPtr conn,
} else {
virDomainHostdevSubsysSCSIHostPtr scsihostsrc = &scsisrc->u.host;
virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Unable to prepare scsi hostdev: %s:%d:%d:%d"),
+ _("Unable to prepare scsi hostdev: %s:%d:%d:%lld"),
scsihostsrc->adapter, scsihostsrc->bus,
scsihostsrc->target, scsihostsrc->unit);
}
@@ -3882,7 +3882,7 @@ int qemuDomainDetachHostDevice(virQEMUDriverPtr driver,
virDomainHostdevSubsysSCSIHostPtr scsihostsrc =
&scsisrc->u.host;
virReportError(VIR_ERR_OPERATION_FAILED,
- _("host scsi device %s:%d:%d.%d not found"),
+ _("host scsi device %s:%d:%d:%lld not found"),
scsihostsrc->adapter, scsihostsrc->bus,
scsihostsrc->target, scsihostsrc->unit);
}
diff --git a/src/util/virhostdev.c b/src/util/virhostdev.c
index 1c8f31e..e67fe18 100644
--- a/src/util/virhostdev.c
+++ b/src/util/virhostdev.c
@@ -1482,7 +1482,7 @@ virHostdevReAttachSCSIHostDevices(virHostdevManagerPtr hostdev_mgr,
scsihostsrc->adapter, scsihostsrc->bus,
scsihostsrc->target, scsihostsrc->unit,
hostdev->readonly, hostdev->shareable))) {
- VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%d on domain %s",
+ VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%lld on domain %s",
scsihostsrc->adapter, scsihostsrc->bus, scsihostsrc->target,
scsihostsrc->unit, dom_name);
return;
@@ -1492,7 +1492,7 @@ virHostdevReAttachSCSIHostDevices(virHostdevManagerPtr hostdev_mgr,
* because qemuProcessStart could fail half way through. */
if (!(tmp = virSCSIDeviceListFind(hostdev_mgr->activeSCSIHostdevs, scsi))) {
- VIR_WARN("Unable to find device %s:%d:%d:%d "
+ VIR_WARN("Unable to find device %s:%d:%d:%lld "
"in list of active SCSI devices",
scsihostsrc->adapter, scsihostsrc->bus,
scsihostsrc->target, scsihostsrc->unit);
@@ -1500,7 +1500,7 @@ virHostdevReAttachSCSIHostDevices(virHostdevManagerPtr hostdev_mgr,
return;
}
- VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeSCSIHostdevs",
+ VIR_DEBUG("Removing %s:%d:%d:%lld dom=%s from activeSCSIHostdevs",
scsihostsrc->adapter, scsihostsrc->bus, scsihostsrc->target,
scsihostsrc->unit, dom_name);
diff --git a/src/util/virscsi.c b/src/util/virscsi.c
index 9f5cf0d..5fd4380 100644
--- a/src/util/virscsi.c
+++ b/src/util/virscsi.c
@@ -56,7 +56,7 @@ struct _virSCSIDevice {
unsigned int adapter;
unsigned int bus;
unsigned int target;
- unsigned int unit;
+ unsigned long long unit;
char *name; /* adapter:bus:target:unit */
char *id; /* model:vendor */
@@ -110,7 +110,7 @@ virSCSIDeviceGetSgName(const char *sysfs_prefix,
const char *adapter,
unsigned int bus,
unsigned int target,
- unsigned int unit)
+ unsigned long long unit)
{
DIR *dir = NULL;
struct dirent *entry;
@@ -123,7 +123,7 @@ virSCSIDeviceGetSgName(const char *sysfs_prefix,
return NULL;
if (virAsprintf(&path,
- "%s/%d:%d:%d:%d/scsi_generic",
+ "%s/%d:%d:%d:%lld/scsi_generic",
prefix, adapter_id, bus, target, unit) < 0)
return NULL;
@@ -157,7 +157,7 @@ virSCSIDeviceGetDevName(const char *sysfs_prefix,
const char *adapter,
unsigned int bus,
unsigned int target,
- unsigned int unit)
+ unsigned long long unit)
{
DIR *dir = NULL;
struct dirent *entry;
@@ -170,7 +170,7 @@ virSCSIDeviceGetDevName(const char *sysfs_prefix,
return NULL;
if (virAsprintf(&path,
- "%s/%d:%d:%d:%d/block",
+ "%s/%d:%d:%d:%lld/block",
prefix, adapter_id, bus, target, unit) < 0)
return NULL;
@@ -200,7 +200,7 @@ virSCSIDeviceNew(const char *sysfs_prefix,
const char *adapter,
unsigned int bus,
unsigned int target,
- unsigned int unit,
+ unsigned long long unit,
bool readonly,
bool shareable)
{
@@ -227,7 +227,7 @@ virSCSIDeviceNew(const char *sysfs_prefix,
if (virSCSIDeviceGetAdapterId(adapter, &dev->adapter) < 0)
goto cleanup;
- if (virAsprintf(&dev->name, "%d:%d:%d:%d", dev->adapter,
+ if (virAsprintf(&dev->name, "%d:%d:%d:%lld", dev->adapter,
dev->bus, dev->target, dev->unit) < 0 ||
virAsprintf(&dev->sg_path, "%s/%s",
sysfs_prefix ? sysfs_prefix : "/dev", sg) < 0)
@@ -347,7 +347,7 @@ virSCSIDeviceGetTarget(virSCSIDevicePtr dev)
return dev->target;
}
-unsigned int
+unsigned long long
virSCSIDeviceGetUnit(virSCSIDevicePtr dev)
{
return dev->unit;
diff --git a/src/util/virscsi.h b/src/util/virscsi.h
index c67837f..df40d7f 100644
--- a/src/util/virscsi.h
+++ b/src/util/virscsi.h
@@ -37,18 +37,18 @@ char *virSCSIDeviceGetSgName(const char *sysfs_prefix,
const char *adapter,
unsigned int bus,
unsigned int target,
- unsigned int unit);
+ unsigned long long unit);
char *virSCSIDeviceGetDevName(const char *sysfs_prefix,
const char *adapter,
unsigned int bus,
unsigned int target,
- unsigned int unit);
+ unsigned long long unit);
virSCSIDevicePtr virSCSIDeviceNew(const char *sysfs_prefix,
const char *adapter,
unsigned int bus,
unsigned int target,
- unsigned int unit,
+ unsigned long long unit,
bool readonly,
bool shareable);
@@ -61,7 +61,7 @@ const char *virSCSIDeviceGetName(virSCSIDevicePtr dev);
unsigned int virSCSIDeviceGetAdapter(virSCSIDevicePtr dev);
unsigned int virSCSIDeviceGetBus(virSCSIDevicePtr dev);
unsigned int virSCSIDeviceGetTarget(virSCSIDevicePtr dev);
-unsigned int virSCSIDeviceGetUnit(virSCSIDevicePtr dev);
+unsigned long long virSCSIDeviceGetUnit(virSCSIDevicePtr dev);
bool virSCSIDeviceGetReadonly(virSCSIDevicePtr dev);
bool virSCSIDeviceGetShareable(virSCSIDevicePtr dev);
diff --git a/tests/testutilsqemu.c b/tests/testutilsqemu.c
index d067bca..ceaabb6 100644
--- a/tests/testutilsqemu.c
+++ b/tests/testutilsqemu.c
@@ -462,7 +462,7 @@ testSCSIDeviceGetSgName(const char *sysfs_prefix ATTRIBUTE_UNUSED,
const char *adapter ATTRIBUTE_UNUSED,
unsigned int bus ATTRIBUTE_UNUSED,
unsigned int target ATTRIBUTE_UNUSED,
- unsigned int unit ATTRIBUTE_UNUSED)
+ unsigned long long unit ATTRIBUTE_UNUSED)
{
char *sg = NULL;
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index 4c47473..aa4d58c 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -415,7 +415,7 @@ struct PCIAddress {
struct SCSIAddress {
unsigned int controller;
unsigned int bus;
- unsigned int unit;
+ unsigned long long unit;
};
struct IDEAddress {
@@ -488,7 +488,7 @@ static int str2SCSIAddress(const char *str, struct SCSIAddress *scsiAddr)
return -1;
unit++;
- if (virStrToLong_ui(unit, NULL, 0, &scsiAddr->unit) != 0)
+ if (virStrToLong_ull(unit, NULL, 0, &scsiAddr->unit) != 0)
return -1;
return 0;
@@ -725,7 +725,7 @@ cmdAttachDisk(vshControl *ctl, const vshCmd *cmd)
if (diskAddr.type == DISK_ADDR_TYPE_SCSI) {
virBufferAsprintf(&buf,
"<address type='drive' controller='%d'"
- " bus='%d' unit='%d' />\n",
+ " bus='%d' unit='%lld' />\n",
diskAddr.addr.scsi.controller, diskAddr.addr.scsi.bus,
diskAddr.addr.scsi.unit);
} else {
--
1.9.1
More information about the libvir-list
mailing list