[libvirt] [PATCH v2 1/2] vz: add memory setting functions to driver
Nikolay Shirokovskiy
nshirokovskiy at virtuozzo.com
Wed Nov 11 07:11:04 UTC 2015
Implement functions for vz containers only. vz VMs memory
managment thru libvirt yet to be designed.
vz memory management for containers is rather different from other
drivers.
1. Whole bunch of memory settings functions change both cur_balloon and maximum
memory to the same value. The reason is that active container memory
settings is not limited by memory set at container startup as in virtual
machine case. Thus there is no real need in 2 parameters and this patch takes
an effort to map this situation to an existent interface.
2. virDomainSetMemory semantics is extended.
Current documentation states that this function changes memory only for
a current domain. At the same time virsh documentation states that behaviour of
'setmem' without flags (that eventually calls virDomainSetMemory) is hypervisor
specific. I think we can extend sematics of the function to the defined in
virsh. First this is already done for virDomainSetMaxMemory, second it would be
convinient for vz driver. With current semantics virDomainSetMemory can't be
implemented as vz always set persistent state if live state is set. With
extended semantics function just holds the vz driver behaviour and
we can use 'setmem' without flags to change domain memory.
3. VIR_DOMAIN_MEM_CURRENT is not supported.
There are 2 reasons. First is to be consistent with vzDomainAttachDeviceFlags
and vzDomainDetachDeviceFlags. Second is that this flag has no good
correllation with vz behaviour. I'm not sure what use case of this flag is,
I suppose it is to call the function without inquiring the current state of
domain so you will not fail because of incorrect flags combination. But with vz
this behaviour is impossible. The function will fail if domain is in active
state and you specify this flag as you can't change running domain config only.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy at virtuozzo.com>
---
src/libvirt-domain.c | 5 ++-
src/vz/vz_driver.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++
src/vz/vz_sdk.c | 23 ++++++++++++++
src/vz/vz_sdk.h | 1 +
4 files changed, 108 insertions(+), 2 deletions(-)
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index de7eb04..56ab907 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -1882,8 +1882,9 @@ virDomainSetMaxMemory(virDomainPtr domain, unsigned long memory)
* to Domain0 i.e. the domain where the application runs.
* This function may require privileged access to the hypervisor.
*
- * This command only changes the runtime configuration of the domain,
- * so can only be called on an active domain.
+ * This command is hypervisor-specific for whether active, persistent,
+ * or both configurations are changed; for more control, use
+ * virDomainSetMemoryFlags().
*
* Returns 0 in case of success and -1 in case of failure.
*/
diff --git a/src/vz/vz_driver.c b/src/vz/vz_driver.c
index 6f1cbfb..7a4d431 100644
--- a/src/vz/vz_driver.c
+++ b/src/vz/vz_driver.c
@@ -1438,6 +1438,84 @@ vzNodeGetFreeMemory(virConnectPtr conn ATTRIBUTE_UNUSED)
return freeMem;
}
+static int vzDomainSetMemoryDefault(virDomainObjPtr dom, unsigned long memory)
+{
+ if (!IS_CT(dom->def)) {
+ virReportError(VIR_ERR_ARGUMENT_UNSUPPORTED, "%s",
+ _("Can't change memory size for vz VM"));
+ return -1;
+ }
+
+ if (prlsdkSetMemsize(dom, memory >> 10) < 0)
+ return -1;
+
+ virDomainDefSetMemoryInitial(dom->def, memory);
+ dom->def->mem.cur_balloon = memory;
+
+ return 0;
+}
+
+static int vzDomainSetMemoryFlags(virDomainPtr domain, unsigned long memory,
+ unsigned int flags)
+{
+ virDomainObjPtr dom = NULL;
+ int ret = -1;
+
+ virCheckFlags(VIR_DOMAIN_AFFECT_LIVE |
+ VIR_DOMAIN_AFFECT_CONFIG |
+ VIR_DOMAIN_MEM_MAXIMUM, -1);
+
+ if (!(dom = vzDomObjFromDomain(domain)))
+ return -1;
+
+ if (!(flags & VIR_DOMAIN_AFFECT_CONFIG)) {
+ virReportError(VIR_ERR_OPERATION_INVALID, "%s",
+ _("domain config update needs VIR_DOMAIN_AFFECT_CONFIG "
+ "flag to be set"));
+ goto cleanup;
+ }
+
+ if (!virDomainObjIsActive(dom) && (flags & VIR_DOMAIN_AFFECT_LIVE)) {
+ virReportError(VIR_ERR_OPERATION_INVALID, "%s",
+ _("cannot do live update domain config on "
+ "inactive domain"));
+ goto cleanup;
+ }
+
+ if (virDomainObjIsActive(dom) && !(flags & VIR_DOMAIN_AFFECT_LIVE)) {
+ virReportError(VIR_ERR_OPERATION_INVALID, "%s",
+ _("updates on a running domain need "
+ "VIR_DOMAIN_AFFECT_LIVE flag"));
+ goto cleanup;
+ }
+
+ ret = vzDomainSetMemoryDefault(dom, memory);
+
+ cleanup:
+
+ virObjectUnlock(dom);
+ return ret;
+}
+
+static int vzDomainSetMemory(virDomainPtr domain, unsigned long memory)
+{
+ virDomainObjPtr dom = NULL;
+ int ret = -1;
+
+ if (!(dom = vzDomObjFromDomain(domain)))
+ return -1;
+
+ ret = vzDomainSetMemoryDefault(dom, memory);
+
+ virObjectUnlock(dom);
+ return ret;
+}
+
+static int vzDomainSetMaxMemory(virDomainPtr domain, unsigned long memory)
+{
+ return vzDomainSetMemory(domain, memory);
+}
+
static virHypervisorDriver vzDriver = {
.name = "vz",
.connectOpen = vzConnectOpen, /* 0.10.0 */
@@ -1499,6 +1577,9 @@ static virHypervisorDriver vzDriver = {
.domainBlockStatsFlags = vzDomainBlockStatsFlags, /* 1.2.17 */
.domainInterfaceStats = vzDomainInterfaceStats, /* 1.2.17 */
.domainMemoryStats = vzDomainMemoryStats, /* 1.2.17 */
+ .domainSetMemoryFlags = vzDomainSetMemoryFlags, /* 1.2.21 */
+ .domainSetMemory = vzDomainSetMemory, /* 1.2.21 */
+ .domainSetMaxMemory = vzDomainSetMaxMemory, /* 1.2.21 */
};
static virConnectDriver vzConnectDriver = {
diff --git a/src/vz/vz_sdk.c b/src/vz/vz_sdk.c
index 89c9e89..2d0f688 100644
--- a/src/vz/vz_sdk.c
+++ b/src/vz/vz_sdk.c
@@ -4036,3 +4036,26 @@ prlsdkGetMemoryStats(virDomainObjPtr dom,
return ret;
}
+
+int prlsdkSetMemsize(virDomainObjPtr dom, unsigned int memsize)
+{
+ int ret = -1;
+ vzDomObjPtr privdom = dom->privateData;
+ PRL_HANDLE job = PRL_INVALID_HANDLE;
+ PRL_RESULT pret;
+
+ job = PrlVm_BeginEdit(privdom->sdkdom);
+ if (PRL_FAILED(waitJob(job)))
+ goto out;
+
+ pret = PrlVmCfg_SetRamSize(privdom->sdkdom, memsize);
+ prlsdkCheckRetGoto(pret, out);
+
+ job = PrlVm_CommitEx(privdom->sdkdom, PVCF_DETACH_HDD_BUNDLE);
+ if (PRL_FAILED(waitJob(job)))
+ goto out;
+
+ ret = 0;
+ out:
+ return ret;
+}
diff --git a/src/vz/vz_sdk.h b/src/vz/vz_sdk.h
index ebe4591..88fef4a 100644
--- a/src/vz/vz_sdk.h
+++ b/src/vz/vz_sdk.h
@@ -76,3 +76,4 @@ int
prlsdkGetVcpuStats(virDomainObjPtr dom, int idx, unsigned long long *time);
int
prlsdkGetMemoryStats(virDomainObjPtr dom, virDomainMemoryStatPtr stats, unsigned int nr_stats);
+int prlsdkSetMemsize(virDomainObjPtr dom, unsigned int memsize);
--
1.7.1
More information about the libvir-list
mailing list