[libvirt] problem with rbd auth after switch to secret objects

[John Ferlan]

On 08/10/2016 06:01 PM, Jim Fehlig wrote:
> Hi John,
> 
> I've been having problems with rbd auth since the change to using qemu's secret
> objects. E.g. when hotplugging disk config
> 
> <disk type="network" device="disk">
>   <driver name="qemu" type="raw" cache="none"/>
>   <source protocol="rbd" name="volumes/volume-f9c33a0a-5313-44fc-9624-c3b09ed21a57">
>     <host name="xxx.xxx.xxx.xxx" port="6789"/>
>   </source>
>   <auth username="cinder">
>     <secret type="ceph" uuid="dcff478d-8021-42c4-b57a-98b5f5447e8f"/>
>   </auth>
>   <target bus="virtio" dev="vdb"/>
> </disk>
> 
> libvirt issues the following monitor commands
> 
> 2016-08-08 16:13:41.720+0000: 27504: info : qemuMonitorSend:1006 :
> QEMU_MONITOR_SEND_MSG: mon=0x7f55c4000f50
> msg={"execute":"object-add","arguments":{"qom-type":"secret","id":"virtio-disk1-secret0","props":{"data":"w6x17STyqO9tMEOpAJy9Mnx+B5R1qrsJBXZZn/uZCKU=","keyid":"masterKey0","iv":"ZAE6WkKf+jDIl9lJkXGsnQ==","format":"base64"}},"id":"libvirt-12"}
> 2016-08-08 16:13:41.722+0000: 27504: debug : qemuMonitorJSONCommandWithFd:296 :
> Send command
> '{"execute":"human-monitor-command","arguments":{"command-line":"drive_add dummy
> file=rbd:volumes/volume-f9c33a0a-5313-44fc-9624-c3b09ed21a57:id=cinder:auth_supported=cephx\\;none:mon_host=xxx.xx.xxx.xxx\\:6789,password-secret=virtio-disk1-secret0,format=raw,if=none,id=drive-virtio-disk1,cache=none"},"id":"libvirt-13"}'
> 
> The latter fails with
> 
> 2016-08-08 16:13:41.733+0000: 27499: debug : virJSONValueFromString:1604 :
> string={"return": "error connecting\r\n", "id": "libvirt-13"}
> 
> Debugging in the qemu rbd code, I found that
> 
> secretid = qemu_opt_get(opts, "password-secret");
> 
> in $qemu-src/block/rbd.c:qemu_rbd_create() returns NULL. The NULL secretid is
> later passed to qemu_rbd_set_auth(), which silently returns success when
> secretid==NULL. Later, rados_connect() fails with "error connecting" since the
> secret was not configured.
> 
> I'm not familiar with qemu option parsing, but it seems the
> ...,password-secret=xxx,... associates the password-secret option parsing with
> the drive object, whereas it needs to be associated with the rbd "file" object?
> As a quick hack test, I made the following change in libvirt and then was able
> to successfully attach the disk
> 
> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
> index 55df23d..eb478fb 100644
> --- a/src/qemu/qemu_command.c
> +++ b/src/qemu/qemu_command.c
> @@ -1287,7 +1287,7 @@ qemuBuildDriveSourceStr(virDomainDiskDefPtr disk,
>      virBufferAddLit(buf, ",");
>  
>      if (secinfo && secinfo->type == VIR_DOMAIN_SECRET_INFO_TYPE_AES) {
> -        virBufferAsprintf(buf, "password-secret=%s,",
> +        virBufferAsprintf(buf, "file.password-secret=%s,",
>                            secinfo->s.aes.alias);
>      }
> 
> I suspect others (including yourself) have done this successfully without that
> hack, so I'm not quite sure what the problem might be in my configuration. I'm
> using libvirt.git master and qemu 2.6, but I didn't notice any post-2.6 patches
> that would help on the qemu side.
> 

Was away on a beach last week - checked out!  So still trying to catch
up...  I'm CC'd Daniel since he made the qemu adjustments for this.

So one question I'd have is do things work if the disk was in the domain
at startup?  The libvirt code essentially reuses the same qemu command
for initial startup and hotplug. The usage of "file.password-secret"
seems to indicate to me something's amiss.

John

> Thanks for any suggestions.
> 
> Regards,
> Jim
>