[libvirt] [PATCH 15/15] qemu: support new pci controller model "pcie-expander-bus"
Laine Stump
laine at laine.org
Thu Mar 24 19:25:50 UTC 2016
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.
As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.
During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
This patch and its prerequisites are part of the resolution for:
https://bugzilla.redhat.com/show_bug.cgi?id=1103314
---
src/qemu/qemu_command.c | 37 +++++++
src/qemu/qemu_domain.c | 21 +++-
src/qemu/qemu_domain_address.c | 2 +
.../qemuxml2argv-pcie-expander-bus-bad-machine.xml | 36 ++++++
.../qemuxml2argv-pcie-expander-bus.args | 123 +++++++++++++++++++++
tests/qemuxml2argvtest.c | 15 +++
6 files changed, 228 insertions(+), 6 deletions(-)
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pcie-expander-bus-bad-machine.xml
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pcie-expander-bus.args
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 3908176..f12c48c 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -2537,6 +2537,43 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
modelName, def->opts.pciopts.port,
def->opts.pciopts.chassis, def->info.alias);
break;
+ case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_EXPANDER_BUS:
+ if (def->opts.pciopts.modelName
+ == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE ||
+ def->opts.pciopts.busNr == -1) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("autogenerated pcie-expander-bus options not set"));
+ goto error;
+ }
+
+ modelName = virDomainControllerPCIModelNameTypeToString(def->opts.pciopts.modelName);
+ if (!modelName) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("unknown pcie-expander-bus model name value %d"),
+ def->opts.pciopts.modelName);
+ goto error;
+ }
+ if (def->opts.pciopts.modelName
+ != VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_PXB_PCIE) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("PCI controller model name '%s' "
+ "is not valid for a pcie-expander-bus"),
+ modelName);
+ goto error;
+ }
+ if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_PXB_PCIE)) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("the pxb-pcie controller "
+ "is not supported in this QEMU binary"));
+ goto error;
+ }
+ virBufferAsprintf(&buf, "%s,bus_nr=%d,id=%s",
+ modelName, def->opts.pciopts.busNr,
+ def->info.alias);
+ if (def->opts.pciopts.numaNode != -1)
+ virBufferAsprintf(&buf, ",numa_node=%d",
+ def->opts.pciopts.numaNode);
+ break;
}
break;
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index 3c00a13..c9261cd 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -1623,28 +1623,37 @@ qemuDomainDeviceDefPostParse(virDomainDeviceDefPtr dev,
if (dev->type == VIR_DOMAIN_DEVICE_CONTROLLER) {
virDomainControllerDefPtr cont = dev->data.controller;
- if (cont->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI &&
- cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCI_EXPANDER_BUS) {
-
- if (!qemuDomainMachineIsI440FX(def)) {
+ if (cont->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI) {
+ if (cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCI_EXPANDER_BUS &&
+ !qemuDomainMachineIsI440FX(def)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("pci-expander-bus controllers are only supported "
"on 440fx-based machinetypes"));
goto cleanup;
}
+ if (cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCIE_EXPANDER_BUS &&
+ !qemuDomainMachineIsQ35(def)) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("pcie-expander-bus controllers are only supported "
+ "on q35-based machinetypes"));
+ goto cleanup;
+ }
/* if a PCI expander bus has a NUMA node set, make sure
* that NUMA node is configured in the guest <cpu><numa>
* array. NUMA cell id's in this array are numbered
* from 0 .. size-1.
*/
- if ((int) virDomainNumaGetNodeCount(def->numa)
+ if ((cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCI_EXPANDER_BUS ||
+ cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCIE_EXPANDER_BUS) &&
+ (int) virDomainNumaGetNodeCount(def->numa)
<= cont->opts.pciopts.numaNode) {
virReportError(VIR_ERR_XML_ERROR,
- _("pci-expander-bus with index %d is "
+ _("%s with index %d is "
"configured for a NUMA node (%d) "
"not present in the domain's "
"<cpu><numa> array (%zu)"),
+ virDomainControllerModelPCITypeToString(cont->model),
cont->idx, cont->opts.pciopts.numaNode,
virDomainNumaGetNodeCount(def->numa));
goto cleanup;
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 9006643..f5dc9c3 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -1379,6 +1379,8 @@ qemuDomainPCIControllerSetDefaultModelName(virDomainControllerDefPtr cont)
*modelName = VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_PXB;
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_EXPANDER_BUS:
+ *modelName = VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_PXB_PCIE;
+ break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT:
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT:
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_LAST:
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-pcie-expander-bus-bad-machine.xml b/tests/qemuxml2argvdata/qemuxml2argv-pcie-expander-bus-bad-machine.xml
new file mode 100644
index 0000000..dc64d97
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-pcie-expander-bus-bad-machine.xml
@@ -0,0 +1,36 @@
+<domain type='qemu'>
+ <name>expander-test</name>
+ <uuid>3ec6cbe1-b5a2-4515-b800-31a61855df41</uuid>
+ <memory unit='KiB'>219100</memory>
+ <currentMemory unit='KiB'>219100</currentMemory>
+ <vcpu placement='static'>16</vcpu>
+ <os>
+ <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type>
+ </os>
+ <cpu>
+ <topology sockets='2' cores='4' threads='2'/>
+ <numa>
+ <cell cpus='0-7' memory='109550' unit='KiB'/>
+ <cell cpus='8-15' memory='109550' unit='KiB'/>
+ </numa>
+ </cpu>
+ <devices>
+ <emulator>/usr/bin/qemu-system-x86_64</emulator>
+ <controller type='usb' index='0' model='none'/>
+ <controller type='ide' index='0'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
+ </controller>
+ <controller type='pci' index='0' model='pci-root'/>
+ <controller type='pci' index='1' model='pcie-expander-bus'>
+ <model name='pxb-pcie'/>
+ <target busNr='254'>
+ <node>1</node>
+ </target>
+ </controller>
+ <input type='mouse' bus='ps2'/>
+ <input type='keyboard' bus='ps2'/>
+ <memballoon model='virtio'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
+ </memballoon>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-pcie-expander-bus.args b/tests/qemuxml2argvdata/qemuxml2argv-pcie-expander-bus.args
new file mode 100644
index 0000000..13f546c
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-pcie-expander-bus.args
@@ -0,0 +1,123 @@
+LC_ALL=C \
+PATH=/bin \
+HOME=/home/test \
+USER=test \
+LOGNAME=test \
+QEMU_AUDIO_DRV=none \
+/usr/libexec/qemu-kvm \
+-name pcie-expander-bus-test \
+-S \
+-M q35 \
+-m 214 \
+-smp 16 \
+-numa node,nodeid=0,cpus=0-7,mem=107 \
+-numa node,nodeid=1,cpus=8-15,mem=107 \
+-uuid 11dbdcdd-4c3b-482b-8903-9bdb8c0a2774 \
+-nographic \
+-nodefaults \
+-monitor unix:/tmp/lib/domain--1-pcie-expander-bus-te/monitor.sock,server,nowait \
+-no-acpi \
+-boot c \
+-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
+-device pci-bridge,chassis_nr=56,id=pci.2,bus=pci.1,addr=0x0 \
+-device pxb-pcie,bus_nr=254,id=pci.3,numa_node=0,bus=pcie.0,addr=0x4 \
+-device ioh3420,port=0x0,chassis=4,id=pci.4,bus=pci.3,addr=0x0 \
+-device x3130-upstream,id=pci.5,bus=pci.4,addr=0x0 \
+-device xio3130-downstream,port=0x0,chassis=6,id=pci.6,bus=pci.5,addr=0x0 \
+-device xio3130-downstream,port=0x1,chassis=7,id=pci.7,bus=pci.5,addr=0x1 \
+-device xio3130-downstream,port=0x2,chassis=8,id=pci.8,bus=pci.5,addr=0x2 \
+-device xio3130-downstream,port=0x3,chassis=9,id=pci.9,bus=pci.5,addr=0x3 \
+-device xio3130-downstream,port=0x4,chassis=10,id=pci.10,bus=pci.5,addr=0x4 \
+-device xio3130-downstream,port=0x5,chassis=11,id=pci.11,bus=pci.5,addr=0x5 \
+-device xio3130-downstream,port=0x6,chassis=12,id=pci.12,bus=pci.5,addr=0x6 \
+-device xio3130-downstream,port=0x7,chassis=13,id=pci.13,bus=pci.5,addr=0x7 \
+-device xio3130-downstream,port=0x8,chassis=14,id=pci.14,bus=pci.5,addr=0x8 \
+-device xio3130-downstream,port=0x9,chassis=15,id=pci.15,bus=pci.5,addr=0x9 \
+-device xio3130-downstream,port=0xa,chassis=16,id=pci.16,bus=pci.5,addr=0xa \
+-device xio3130-downstream,port=0xb,chassis=17,id=pci.17,bus=pci.5,addr=0xb \
+-device xio3130-downstream,port=0xc,chassis=18,id=pci.18,bus=pci.5,addr=0xc \
+-device xio3130-downstream,port=0xd,chassis=19,id=pci.19,bus=pci.5,addr=0xd \
+-device xio3130-downstream,port=0xe,chassis=20,id=pci.20,bus=pci.5,addr=0xe \
+-device xio3130-downstream,port=0xf,chassis=21,id=pci.21,bus=pci.5,addr=0xf \
+-device xio3130-downstream,port=0x10,chassis=22,id=pci.22,bus=pci.5,addr=0x10 \
+-device xio3130-downstream,port=0x11,chassis=23,id=pci.23,bus=pci.5,addr=0x11 \
+-device xio3130-downstream,port=0x12,chassis=24,id=pci.24,bus=pci.5,addr=0x12 \
+-device xio3130-downstream,port=0x13,chassis=25,id=pci.25,bus=pci.5,addr=0x13 \
+-device xio3130-downstream,port=0x14,chassis=26,id=pci.26,bus=pci.5,addr=0x14 \
+-device xio3130-downstream,port=0x15,chassis=27,id=pci.27,bus=pci.5,addr=0x15 \
+-device xio3130-downstream,port=0x16,chassis=28,id=pci.28,bus=pci.5,addr=0x16 \
+-device xio3130-downstream,port=0x17,chassis=29,id=pci.29,bus=pci.5,addr=0x17 \
+-device xio3130-downstream,port=0x18,chassis=30,id=pci.30,bus=pci.5,addr=0x18 \
+-device xio3130-downstream,port=0x19,chassis=31,id=pci.31,bus=pci.5,addr=0x19 \
+-device xio3130-downstream,port=0x1a,chassis=32,id=pci.32,bus=pci.5,addr=0x1a \
+-device xio3130-downstream,port=0x1b,chassis=33,id=pci.33,bus=pci.5,addr=0x1b \
+-device xio3130-downstream,port=0x1c,chassis=34,id=pci.34,bus=pci.5,addr=0x1c \
+-device xio3130-downstream,port=0x1d,chassis=35,id=pci.35,bus=pci.5,addr=0x1d \
+-device xio3130-downstream,port=0x1e,chassis=36,id=pci.36,bus=pci.5,addr=0x1e \
+-device xio3130-downstream,port=0x1f,chassis=37,id=pci.37,bus=pci.5,addr=0x1f \
+-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-sata0-0-0 \
+-device ide-drive,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0 \
+-device rtl8139,vlan=0,id=net0,mac=52:54:00:f1:95:51,bus=pci.6,addr=0x0 \
+-net user,vlan=0,name=hostnet0 \
+-device e1000,vlan=1,id=net1,mac=52:54:00:5c:c6:1a,bus=pci.7,addr=0x0 \
+-net user,vlan=1,name=hostnet1 \
+-device e1000,vlan=2,id=net2,mac=52:54:00:39:97:ac,bus=pci.8,addr=0x0 \
+-net user,vlan=2,name=hostnet2 \
+-device e1000,vlan=3,id=net3,mac=52:54:00:ee:b9:a8,bus=pci.9,addr=0x0 \
+-net user,vlan=3,name=hostnet3 \
+-device e1000,vlan=4,id=net4,mac=52:54:00:a9:f7:17,bus=pci.10,addr=0x0 \
+-net user,vlan=4,name=hostnet4 \
+-device e1000,vlan=5,id=net5,mac=52:54:00:df:2b:f3,bus=pci.11,addr=0x0 \
+-net user,vlan=5,name=hostnet5 \
+-device e1000,vlan=6,id=net6,mac=52:54:00:78:94:b4,bus=pci.12,addr=0x0 \
+-net user,vlan=6,name=hostnet6 \
+-device e1000,vlan=7,id=net7,mac=52:54:00:6b:9b:06,bus=pci.13,addr=0x0 \
+-net user,vlan=7,name=hostnet7 \
+-device e1000,vlan=8,id=net8,mac=52:54:00:17:df:bc,bus=pci.14,addr=0x0 \
+-net user,vlan=8,name=hostnet8 \
+-device e1000,vlan=9,id=net9,mac=52:54:00:3b:d0:51,bus=pci.15,addr=0x0 \
+-net user,vlan=9,name=hostnet9 \
+-device e1000,vlan=10,id=net10,mac=52:54:00:8d:2d:17,bus=pci.16,addr=0x0 \
+-net user,vlan=10,name=hostnet10 \
+-device e1000,vlan=11,id=net11,mac=52:54:00:a7:66:af,bus=pci.17,addr=0x0 \
+-net user,vlan=11,name=hostnet11 \
+-device e1000,vlan=12,id=net12,mac=52:54:00:54:ab:d7,bus=pci.18,addr=0x0 \
+-net user,vlan=12,name=hostnet12 \
+-device e1000,vlan=13,id=net13,mac=52:54:00:1f:99:90,bus=pci.19,addr=0x0 \
+-net user,vlan=13,name=hostnet13 \
+-device e1000,vlan=14,id=net14,mac=52:54:00:c8:43:87,bus=pci.20,addr=0x0 \
+-net user,vlan=14,name=hostnet14 \
+-device e1000,vlan=15,id=net15,mac=52:54:00:df:22:b2,bus=pci.21,addr=0x0 \
+-net user,vlan=15,name=hostnet15 \
+-device e1000,vlan=16,id=net16,mac=52:54:00:d2:9a:47,bus=pci.22,addr=0x0 \
+-net user,vlan=16,name=hostnet16 \
+-device e1000,vlan=17,id=net17,mac=52:54:00:86:05:e2,bus=pci.23,addr=0x0 \
+-net user,vlan=17,name=hostnet17 \
+-device e1000,vlan=18,id=net18,mac=52:54:00:8c:1c:c2,bus=pci.24,addr=0x0 \
+-net user,vlan=18,name=hostnet18 \
+-device e1000,vlan=19,id=net19,mac=52:54:00:48:58:92,bus=pci.25,addr=0x0 \
+-net user,vlan=19,name=hostnet19 \
+-device e1000,vlan=20,id=net20,mac=52:54:00:99:e5:bf,bus=pci.26,addr=0x0 \
+-net user,vlan=20,name=hostnet20 \
+-device e1000,vlan=21,id=net21,mac=52:54:00:b1:8c:25,bus=pci.27,addr=0x0 \
+-net user,vlan=21,name=hostnet21 \
+-device e1000,vlan=22,id=net22,mac=52:54:00:60:e0:d0,bus=pci.28,addr=0x0 \
+-net user,vlan=22,name=hostnet22 \
+-device e1000,vlan=23,id=net23,mac=52:54:00:37:00:6a,bus=pci.29,addr=0x0 \
+-net user,vlan=23,name=hostnet23 \
+-device e1000,vlan=24,id=net24,mac=52:54:00:c7:c8:ad,bus=pci.30,addr=0x0 \
+-net user,vlan=24,name=hostnet24 \
+-device e1000,vlan=25,id=net25,mac=52:54:00:4e:a7:cf,bus=pci.31,addr=0x0 \
+-net user,vlan=25,name=hostnet25 \
+-device e1000,vlan=26,id=net26,mac=52:54:00:00:79:69,bus=pci.32,addr=0x0 \
+-net user,vlan=26,name=hostnet26 \
+-device e1000,vlan=27,id=net27,mac=52:54:00:47:00:6f,bus=pci.33,addr=0x0 \
+-net user,vlan=27,name=hostnet27 \
+-device e1000,vlan=28,id=net28,mac=52:54:00:2a:8c:8b,bus=pci.34,addr=0x0 \
+-net user,vlan=28,name=hostnet28 \
+-device e1000,vlan=29,id=net29,mac=52:54:00:ec:d5:e3,bus=pci.35,addr=0x0 \
+-net user,vlan=29,name=hostnet29 \
+-device e1000,vlan=30,id=net30,mac=52:54:00:7e:6e:c8,bus=pci.36,addr=0x0 \
+-net user,vlan=30,name=hostnet30 \
+-device e1000,vlan=31,id=net31,mac=52:54:00:7e:6d:c9,bus=pci.37,addr=0x0 \
+-net user,vlan=31,name=hostnet31
diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c
index 65be98f..7b62511 100644
--- a/tests/qemuxml2argvtest.c
+++ b/tests/qemuxml2argvtest.c
@@ -1590,6 +1590,21 @@ mymain(void)
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PXB);
+ DO_TEST("pcie-expander-bus",
+ QEMU_CAPS_DEVICE_PCI_BRIDGE,
+ QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
+ QEMU_CAPS_DEVICE_IOH3420,
+ QEMU_CAPS_DEVICE_X3130_UPSTREAM,
+ QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
+ QEMU_CAPS_DEVICE_PXB_PCIE);
+ DO_TEST_PARSE_ERROR("pcie-expander-bus-bad-machine",
+ QEMU_CAPS_DEVICE_PCI_BRIDGE,
+ QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
+ QEMU_CAPS_DEVICE_IOH3420,
+ QEMU_CAPS_DEVICE_X3130_UPSTREAM,
+ QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
+ QEMU_CAPS_DEVICE_PXB_PCIE);
+
DO_TEST("hostdev-scsi-lsi",
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
--
2.5.5
More information about the libvir-list
mailing list