[libvirt] [PATCH v2 2/4] domain: Make <address type='pci'/> request address allocation
Cole Robinson
crobinso at redhat.com
Sun May 15 19:11:27 UTC 2016
If a bare device <address type='pci'/> is specified, set an internal
flag address->auto_allocate. Individual hv drivers can then check for
this and act on it if they want, nothing is allocated in generic code.
If drivers allocate an address, they are expected to unset auto_allocate.
Generic domain conf code then checks at the end of PostParse to ensure no
device addresses still have auto_allocate set; this ensures we aren't
formatting any bogus address XML, and it informs the user if their
request didn't work. Add a genericxml2xml test case for this.
The auto_allocate property is a part of the generic address structure
and not the PCI specific bits, this will make it easier to reuse with
other address types too.
One note: we detect <address type='pci'/> by counting its XML properties,
rather than comparing specifically against parsed values, which seems
easier to maintain.
---
docs/formatdomain.html.in | 5 +++-
docs/schemas/domaincommon.rng | 5 +++-
src/conf/domain_conf.c | 30 +++++++++++++++++++++-
src/conf/domain_conf.h | 1 +
.../generic-pci-autofill-addr.xml | 27 +++++++++++++++++++
tests/genericxml2xmltest.c | 3 +++
6 files changed, 68 insertions(+), 3 deletions(-)
create mode 100644 tests/genericxml2xmlindata/generic-pci-autofill-addr.xml
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 58b8cb6..150938d 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -2930,7 +2930,10 @@
(<span class="since">since 0.9.7, requires QEMU
0.13</span>). <code>multifunction</code> defaults to 'off',
but should be set to 'on' for function 0 of a slot that will
- have multiple functions used.
+ have multiple functions used.<br/>
+ <span class="since">Since 1.3.5</span>, some hypervisor drivers
+ may accept a bare <code><address type='pci'/></code> XML block
+ as an explicit request to allocate a PCI address for the device.
</dd>
<dt><code>drive</code></dt>
<dd>Drive addresses have the following additional
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index 8798001..94ffab2 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -4538,7 +4538,10 @@
<attribute name="type">
<value>pci</value>
</attribute>
- <ref name="pciaddress"/>
+ <choice>
+ <ref name="pciaddress"/>
+ <empty/>
+ </choice>
</group>
<group>
<attribute name="type">
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 1c8d326..fd21dba 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -3924,6 +3924,23 @@ virDomainDefPostParseTimer(virDomainDefPtr def)
}
+static int
+virDomainCheckUnallocatedDeviceAddrs(virDomainDefPtr def ATTRIBUTE_UNUSED,
+ virDomainDeviceDefPtr dev,
+ virDomainDeviceInfoPtr info,
+ void *data ATTRIBUTE_UNUSED)
+{
+ if (!info->auto_allocate)
+ return 0;
+
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("driver didn't allocate requested address type '%s' for device '%s'"),
+ virDomainDeviceAddressTypeToString(info->type),
+ virDomainDeviceTypeToString(dev->type));
+ return -1;
+}
+
+
/* Check if a drive type address $controller:$bus:$target:$unit is already
* taken by a disk or not.
*/
@@ -4455,6 +4472,12 @@ virDomainDefPostParse(virDomainDefPtr def,
return ret;
}
+ /* Ensure the driver filled in any auto_allocate addresses.
+ This must come after the assignAddressesCallback */
+ if (virDomainDeviceInfoIterate(def, virDomainCheckUnallocatedDeviceAddrs,
+ NULL) < 0)
+ return -1;
+
if (virDomainDefPostParseCheckFeatures(def, xmlopt) < 0)
return -1;
@@ -5091,8 +5114,13 @@ virDomainDeviceInfoParseXML(xmlNodePtr node,
switch ((virDomainDeviceAddressType) info->type) {
case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI:
- if (virPCIDeviceAddressParseXML(address, &info->addr.pci) < 0)
+ if (virXMLPropertyCount(address) == 1) {
+ /* Bare <address type='pci'/> is a request to allocate
+ the address. */
+ info->auto_allocate = true;
+ } else if (virPCIDeviceAddressParseXML(address, &info->addr.pci) < 0) {
goto cleanup;
+ }
break;
case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE:
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index 02594fe..d347e8f 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -347,6 +347,7 @@ struct _virDomainDeviceInfo {
*/
char *alias;
int type; /* virDomainDeviceAddressType */
+ bool auto_allocate;
union {
virPCIDeviceAddress pci;
virDomainDeviceDriveAddress drive;
diff --git a/tests/genericxml2xmlindata/generic-pci-autofill-addr.xml b/tests/genericxml2xmlindata/generic-pci-autofill-addr.xml
new file mode 100644
index 0000000..06eadb6
--- /dev/null
+++ b/tests/genericxml2xmlindata/generic-pci-autofill-addr.xml
@@ -0,0 +1,27 @@
+<domain type='test'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory unit='KiB'>219136</memory>
+ <currentMemory unit='KiB'>219136</currentMemory>
+ <vcpu placement='static'>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>destroy</on_crash>
+ <devices>
+ <emulator>/usr/bin/qemu</emulator>
+ <disk type='block' device='disk'>
+ <driver name='qemu' type='raw'/>
+ <source dev='/dev/HostVG/QEMUGuest1'/>
+ <target dev='vda' bus='virtio'/>
+ <address type='pci'/>
+ </disk>
+ <controller type='usb' index='0'>
+ <address type='pci'/>
+ </controller>
+ </devices>
+</domain>
diff --git a/tests/genericxml2xmltest.c b/tests/genericxml2xmltest.c
index 70ecd2d..2c492c3 100644
--- a/tests/genericxml2xmltest.c
+++ b/tests/genericxml2xmltest.c
@@ -91,6 +91,9 @@ mymain(void)
DO_TEST_FULL("name-slash-parse", 0, false,
TEST_COMPARE_DOM_XML2XML_RESULT_FAIL_PARSE);
+ DO_TEST_FULL("pci-autofill-addr", 0, false,
+ TEST_COMPARE_DOM_XML2XML_RESULT_FAIL_PARSE);
+
virObjectUnref(caps);
virObjectUnref(xmlopt);
--
2.7.4
More information about the libvir-list
mailing list