[libvirt] [PATCH 1/7] Remove qemuProcessInitPCIAddresses with dependencies
Ján Tomko
jtomko at redhat.com
Thu May 19 18:59:40 UTC 2016
It was only called for QEMUs without QEMU_CAPS_DEVICE,
which we no longer support.
---
src/qemu/qemu_monitor.c | 15 --
src/qemu/qemu_monitor.h | 10 --
src/qemu/qemu_monitor_json.c | 9 -
src/qemu/qemu_monitor_json.h | 3 -
src/qemu/qemu_monitor_text.c | 126 -------------
src/qemu/qemu_monitor_text.h | 3 -
src/qemu/qemu_process.c | 410 -------------------------------------------
7 files changed, 576 deletions(-)
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index 1f402ee..7d1ca91 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -2695,21 +2695,6 @@ qemuMonitorGetChardevInfo(qemuMonitorPtr mon,
}
-int
-qemuMonitorGetAllPCIAddresses(qemuMonitorPtr mon,
- qemuMonitorPCIAddress **addrs)
-{
- VIR_DEBUG("addrs=%p", addrs);
-
- QEMU_CHECK_MONITOR(mon);
-
- if (mon->json)
- return qemuMonitorJSONGetAllPCIAddresses(mon, addrs);
- else
- return qemuMonitorTextGetAllPCIAddresses(mon, addrs);
-}
-
-
/**
* qemuMonitorDriveDel:
* @mon: monitor object
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 4d8f21f..6359314 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -677,16 +677,6 @@ int qemuMonitorAttachPCIDiskController(qemuMonitorPtr mon,
const char *bus,
virPCIDeviceAddress *guestAddr);
-typedef struct _qemuMonitorPCIAddress qemuMonitorPCIAddress;
-struct _qemuMonitorPCIAddress {
- unsigned int vendor;
- unsigned int product;
- virPCIDeviceAddress addr;
-};
-
-int qemuMonitorGetAllPCIAddresses(qemuMonitorPtr mon,
- qemuMonitorPCIAddress **addrs);
-
int qemuMonitorAddDevice(qemuMonitorPtr mon,
const char *devicestr);
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index 1790e4d..64a8765 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -3568,15 +3568,6 @@ qemuMonitorJSONGetChardevInfo(qemuMonitorPtr mon,
}
-int qemuMonitorJSONGetAllPCIAddresses(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
- qemuMonitorPCIAddress **addrs ATTRIBUTE_UNUSED)
-{
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("query-pci not supported in JSON mode"));
- return -1;
-}
-
-
int qemuMonitorJSONDelDevice(qemuMonitorPtr mon,
const char *devalias)
{
diff --git a/src/qemu/qemu_monitor_json.h b/src/qemu/qemu_monitor_json.h
index b207e3c..95bba69 100644
--- a/src/qemu/qemu_monitor_json.h
+++ b/src/qemu/qemu_monitor_json.h
@@ -215,9 +215,6 @@ int qemuMonitorJSONAttachPCIDiskController(qemuMonitorPtr mon,
const char *bus,
virPCIDeviceAddress *guestAddr);
-int qemuMonitorJSONGetAllPCIAddresses(qemuMonitorPtr mon,
- qemuMonitorPCIAddress **addrs);
-
int qemuMonitorJSONAddDevice(qemuMonitorPtr mon,
const char *devicestr);
diff --git a/src/qemu/qemu_monitor_text.c b/src/qemu/qemu_monitor_text.c
index ddf16b2..28a6e1b 100644
--- a/src/qemu/qemu_monitor_text.c
+++ b/src/qemu/qemu_monitor_text.c
@@ -1833,132 +1833,6 @@ int qemuMonitorTextGetChardevInfo(qemuMonitorPtr mon,
}
-/*
- * The format we're after looks like this
- *
- * (qemu) info pci
- * Bus 0, device 0, function 0:
- * Host bridge: PCI device 8086:1237
- * id ""
- * Bus 0, device 1, function 0:
- * ISA bridge: PCI device 8086:7000
- * id ""
- * Bus 0, device 1, function 1:
- * IDE controller: PCI device 8086:7010
- * BAR4: I/O at 0xc000 [0xc00f].
- * id ""
- * Bus 0, device 1, function 3:
- * Bridge: PCI device 8086:7113
- * IRQ 9.
- * id ""
- * Bus 0, device 2, function 0:
- * VGA controller: PCI device 1013:00b8
- * BAR0: 32 bit prefetchable memory at 0xf0000000 [0xf1ffffff].
- * BAR1: 32 bit memory at 0xf2000000 [0xf2000fff].
- * id ""
- * Bus 0, device 3, function 0:
- * Ethernet controller: PCI device 8086:100e
- * IRQ 11.
- * BAR0: 32 bit memory at 0xf2020000 [0xf203ffff].
- * BAR1: I/O at 0xc040 [0xc07f].
- * id ""
- *
- * Of this, we're interesting in the vendor/product ID
- * and the bus/device/function data.
- */
-#define CHECK_END(p) if (!(p)) break;
-#define SKIP_TO(p, lbl) \
- (p) = strstr((p), (lbl)); \
- if (p) \
- (p) += strlen(lbl);
-#define GET_INT(p, base, val) \
- if (virStrToLong_ui((p), &(p), (base), &(val)) < 0) { \
- virReportError(VIR_ERR_OPERATION_FAILED, \
- _("cannot parse value for %s"), #val); \
- break; \
- }
-#define SKIP_SPACE(p) \
- while (*(p) == ' ') (p)++;
-
-int qemuMonitorTextGetAllPCIAddresses(qemuMonitorPtr mon,
- qemuMonitorPCIAddress **retaddrs)
-{
- char *reply;
- qemuMonitorPCIAddress *addrs = NULL;
- int naddrs = 0;
- char *p;
-
- *retaddrs = NULL;
-
- if (qemuMonitorHMPCommand(mon, "info pci", &reply) < 0)
- return -1;
-
- p = reply;
-
-
- while (p) {
- unsigned int bus, slot, func, vendor, product;
-
- SKIP_TO(p, " Bus");
- CHECK_END(p);
- SKIP_SPACE(p);
- GET_INT(p, 10, bus);
- CHECK_END(p);
-
- SKIP_TO(p, ", device");
- CHECK_END(p);
- SKIP_SPACE(p);
- GET_INT(p, 10, slot);
- CHECK_END(p);
-
- SKIP_TO(p, ", function");
- CHECK_END(p);
- SKIP_SPACE(p);
- GET_INT(p, 10, func);
- CHECK_END(p);
-
- SKIP_TO(p, "PCI device");
- CHECK_END(p);
- SKIP_SPACE(p);
- GET_INT(p, 16, vendor);
- CHECK_END(p);
-
- if (*p != ':')
- break;
- p++;
- GET_INT(p, 16, product);
-
- if (VIR_REALLOC_N(addrs, naddrs+1) < 0)
- goto error;
-
- addrs[naddrs].addr.domain = 0;
- addrs[naddrs].addr.bus = bus;
- addrs[naddrs].addr.slot = slot;
- addrs[naddrs].addr.function = func;
- addrs[naddrs].vendor = vendor;
- addrs[naddrs].product = product;
- naddrs++;
-
- VIR_DEBUG("Got dev %d:%d:%d %x:%x", bus, slot, func, vendor, product);
- }
-
- VIR_FREE(reply);
-
- *retaddrs = addrs;
-
- return naddrs;
-
- error:
- VIR_FREE(addrs);
- VIR_FREE(reply);
- return -1;
-}
-#undef GET_INT
-#undef SKIP_SPACE
-#undef CHECK_END
-#undef SKIP_TO
-
-
int qemuMonitorTextDelDevice(qemuMonitorPtr mon,
const char *devalias)
{
diff --git a/src/qemu/qemu_monitor_text.h b/src/qemu/qemu_monitor_text.h
index d30f1a4..eeaca52 100644
--- a/src/qemu/qemu_monitor_text.h
+++ b/src/qemu/qemu_monitor_text.h
@@ -142,9 +142,6 @@ int qemuMonitorTextRemoveNetdev(qemuMonitorPtr mon,
int qemuMonitorTextGetChardevInfo(qemuMonitorPtr mon,
virHashTablePtr info);
-int qemuMonitorTextGetAllPCIAddresses(qemuMonitorPtr mon,
- qemuMonitorPCIAddress **addrs);
-
int qemuMonitorTextAddDevice(qemuMonitorPtr mon,
const char *devicestr);
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index f4bf6c1..40c238b 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -2441,400 +2441,6 @@ qemuProcessInitPasswords(virConnectPtr conn,
}
-#define QEMU_PCI_VENDOR_INTEL 0x8086
-#define QEMU_PCI_VENDOR_LSI_LOGIC 0x1000
-#define QEMU_PCI_VENDOR_REDHAT 0x1af4
-#define QEMU_PCI_VENDOR_CIRRUS 0x1013
-#define QEMU_PCI_VENDOR_REALTEK 0x10ec
-#define QEMU_PCI_VENDOR_AMD 0x1022
-#define QEMU_PCI_VENDOR_ENSONIQ 0x1274
-#define QEMU_PCI_VENDOR_VMWARE 0x15ad
-#define QEMU_PCI_VENDOR_QEMU 0x1234
-
-#define QEMU_PCI_PRODUCT_DISK_VIRTIO 0x1001
-
-#define QEMU_PCI_PRODUCT_BALLOON_VIRTIO 0x1002
-
-#define QEMU_PCI_PRODUCT_NIC_NE2K 0x8029
-#define QEMU_PCI_PRODUCT_NIC_PCNET 0x2000
-#define QEMU_PCI_PRODUCT_NIC_RTL8139 0x8139
-#define QEMU_PCI_PRODUCT_NIC_E1000 0x100E
-#define QEMU_PCI_PRODUCT_NIC_VIRTIO 0x1000
-
-#define QEMU_PCI_PRODUCT_VGA_CIRRUS 0x00b8
-#define QEMU_PCI_PRODUCT_VGA_VMWARE 0x0405
-#define QEMU_PCI_PRODUCT_VGA_STDVGA 0x1111
-
-#define QEMU_PCI_PRODUCT_AUDIO_AC97 0x2415
-#define QEMU_PCI_PRODUCT_AUDIO_ES1370 0x5000
-
-#define QEMU_PCI_PRODUCT_CONTROLLER_PIIX 0x7010
-#define QEMU_PCI_PRODUCT_CONTROLLER_LSI 0x0012
-
-#define QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB 0x25ab
-
-static int
-qemuProcessAssignNextPCIAddress(virDomainDeviceInfo *info,
- int vendor,
- int product,
- qemuMonitorPCIAddress *addrs,
- int naddrs)
-{
- bool found = false;
- size_t i;
-
- VIR_DEBUG("Look for %x:%x out of %d", vendor, product, naddrs);
-
- for (i = 0; i < naddrs; i++) {
- VIR_DEBUG("Maybe %x:%x", addrs[i].vendor, addrs[i].product);
- if (addrs[i].vendor == vendor &&
- addrs[i].product == product) {
- VIR_DEBUG("Match %zu", i);
- found = true;
- break;
- }
- }
- if (!found)
- return -1;
-
- /* Blank it out so this device isn't matched again */
- addrs[i].vendor = 0;
- addrs[i].product = 0;
-
- if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
- info->type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI;
-
- if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
- info->addr.pci.domain = addrs[i].addr.domain;
- info->addr.pci.bus = addrs[i].addr.bus;
- info->addr.pci.slot = addrs[i].addr.slot;
- info->addr.pci.function = addrs[i].addr.function;
- }
-
- return 0;
-}
-
-static int
-qemuProcessGetPCIDiskVendorProduct(virDomainDiskDefPtr def,
- unsigned *vendor,
- unsigned *product)
-{
- switch (def->bus) {
- case VIR_DOMAIN_DISK_BUS_VIRTIO:
- *vendor = QEMU_PCI_VENDOR_REDHAT;
- *product = QEMU_PCI_PRODUCT_DISK_VIRTIO;
- break;
-
- default:
- return -1;
- }
-
- return 0;
-}
-
-static int
-qemuProcessGetPCINetVendorProduct(virDomainNetDefPtr def,
- unsigned *vendor,
- unsigned *product)
-{
- if (!def->model)
- return -1;
-
- if (STREQ(def->model, "ne2k_pci")) {
- *vendor = QEMU_PCI_VENDOR_REALTEK;
- *product = QEMU_PCI_PRODUCT_NIC_NE2K;
- } else if (STREQ(def->model, "pcnet")) {
- *vendor = QEMU_PCI_VENDOR_AMD;
- *product = QEMU_PCI_PRODUCT_NIC_PCNET;
- } else if (STREQ(def->model, "rtl8139")) {
- *vendor = QEMU_PCI_VENDOR_REALTEK;
- *product = QEMU_PCI_PRODUCT_NIC_RTL8139;
- } else if (STREQ(def->model, "e1000")) {
- *vendor = QEMU_PCI_VENDOR_INTEL;
- *product = QEMU_PCI_PRODUCT_NIC_E1000;
- } else if (STREQ(def->model, "virtio")) {
- *vendor = QEMU_PCI_VENDOR_REDHAT;
- *product = QEMU_PCI_PRODUCT_NIC_VIRTIO;
- } else {
- VIR_INFO("Unexpected NIC model %s, cannot get PCI address",
- def->model);
- return -1;
- }
- return 0;
-}
-
-static int
-qemuProcessGetPCIControllerVendorProduct(virDomainControllerDefPtr def,
- unsigned *vendor,
- unsigned *product)
-{
- switch (def->type) {
- case VIR_DOMAIN_CONTROLLER_TYPE_SCSI:
- *vendor = QEMU_PCI_VENDOR_LSI_LOGIC;
- *product = QEMU_PCI_PRODUCT_CONTROLLER_LSI;
- break;
-
- case VIR_DOMAIN_CONTROLLER_TYPE_FDC:
- /* XXX we could put in the ISA bridge address, but
- that's not technically the FDC's address */
- return -1;
-
- case VIR_DOMAIN_CONTROLLER_TYPE_IDE:
- *vendor = QEMU_PCI_VENDOR_INTEL;
- *product = QEMU_PCI_PRODUCT_CONTROLLER_PIIX;
- break;
-
- default:
- VIR_INFO("Unexpected controller type %s, cannot get PCI address",
- virDomainControllerTypeToString(def->type));
- return -1;
- }
-
- return 0;
-}
-
-static int
-qemuProcessGetPCIVideoVendorProduct(virDomainVideoDefPtr def,
- unsigned *vendor,
- unsigned *product)
-{
- switch (def->type) {
- case VIR_DOMAIN_VIDEO_TYPE_CIRRUS:
- *vendor = QEMU_PCI_VENDOR_CIRRUS;
- *product = QEMU_PCI_PRODUCT_VGA_CIRRUS;
- break;
-
- case VIR_DOMAIN_VIDEO_TYPE_VGA:
- *vendor = QEMU_PCI_VENDOR_QEMU;
- *product = QEMU_PCI_PRODUCT_VGA_STDVGA;
- break;
-
- case VIR_DOMAIN_VIDEO_TYPE_VMVGA:
- *vendor = QEMU_PCI_VENDOR_VMWARE;
- *product = QEMU_PCI_PRODUCT_VGA_VMWARE;
- break;
-
- default:
- return -1;
- }
- return 0;
-}
-
-static int
-qemuProcessGetPCISoundVendorProduct(virDomainSoundDefPtr def,
- unsigned *vendor,
- unsigned *product)
-{
- switch (def->model) {
- case VIR_DOMAIN_SOUND_MODEL_ES1370:
- *vendor = QEMU_PCI_VENDOR_ENSONIQ;
- *product = QEMU_PCI_PRODUCT_AUDIO_ES1370;
- break;
-
- case VIR_DOMAIN_SOUND_MODEL_AC97:
- *vendor = QEMU_PCI_VENDOR_INTEL;
- *product = QEMU_PCI_PRODUCT_AUDIO_AC97;
- break;
-
- default:
- return -1;
- }
-
- return 0;
-}
-
-static int
-qemuProcessGetPCIWatchdogVendorProduct(virDomainWatchdogDefPtr def,
- unsigned *vendor,
- unsigned *product)
-{
- switch (def->model) {
- case VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB:
- *vendor = QEMU_PCI_VENDOR_INTEL;
- *product = QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB;
- break;
-
- default:
- return -1;
- }
-
- return 0;
-}
-
-
-static int
-qemuProcessGetPCIMemballoonVendorProduct(virDomainMemballoonDefPtr def,
- unsigned *vendor,
- unsigned *product)
-{
- switch (def->model) {
- case VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO:
- *vendor = QEMU_PCI_VENDOR_REDHAT;
- *product = QEMU_PCI_PRODUCT_BALLOON_VIRTIO;
- break;
-
- default:
- return -1;
- }
-
- return 0;
-}
-
-
-/*
- * This entire method assumes that PCI devices in 'info pci'
- * match ordering of devices specified on the command line
- * wrt to devices of matching vendor+product
- *
- * XXXX this might not be a valid assumption if we assign
- * some static addrs on CLI. Have to check that...
- */
-static int
-qemuProcessDetectPCIAddresses(virDomainObjPtr vm,
- qemuMonitorPCIAddress *addrs,
- int naddrs)
-{
- unsigned int vendor = 0, product = 0;
- size_t i;
-
- /* XXX should all these vendor/product IDs be kept in the
- * actual device data structure instead ?
- */
-
- for (i = 0; i < vm->def->ndisks; i++) {
- if (qemuProcessGetPCIDiskVendorProduct(vm->def->disks[i], &vendor, &product) < 0)
- continue;
-
- if (qemuProcessAssignNextPCIAddress(&(vm->def->disks[i]->info),
- vendor, product,
- addrs, naddrs) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("cannot find PCI address for VirtIO disk %s"),
- vm->def->disks[i]->dst);
- return -1;
- }
- }
-
- for (i = 0; i < vm->def->nnets; i++) {
- if (qemuProcessGetPCINetVendorProduct(vm->def->nets[i], &vendor, &product) < 0)
- continue;
-
- if (qemuProcessAssignNextPCIAddress(&(vm->def->nets[i]->info),
- vendor, product,
- addrs, naddrs) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("cannot find PCI address for %s NIC"),
- vm->def->nets[i]->model);
- return -1;
- }
- }
-
- for (i = 0; i < vm->def->ncontrollers; i++) {
- if (qemuProcessGetPCIControllerVendorProduct(vm->def->controllers[i], &vendor, &product) < 0)
- continue;
-
- if (qemuProcessAssignNextPCIAddress(&(vm->def->controllers[i]->info),
- vendor, product,
- addrs, naddrs) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("cannot find PCI address for controller %s"),
- virDomainControllerTypeToString(vm->def->controllers[i]->type));
- return -1;
- }
- }
-
- for (i = 0; i < vm->def->nvideos; i++) {
- if (qemuProcessGetPCIVideoVendorProduct(vm->def->videos[i], &vendor, &product) < 0)
- continue;
-
- if (qemuProcessAssignNextPCIAddress(&(vm->def->videos[i]->info),
- vendor, product,
- addrs, naddrs) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("cannot find PCI address for video adapter %s"),
- virDomainVideoTypeToString(vm->def->videos[i]->type));
- return -1;
- }
- }
-
- for (i = 0; i < vm->def->nsounds; i++) {
- if (qemuProcessGetPCISoundVendorProduct(vm->def->sounds[i], &vendor, &product) < 0)
- continue;
-
- if (qemuProcessAssignNextPCIAddress(&(vm->def->sounds[i]->info),
- vendor, product,
- addrs, naddrs) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("cannot find PCI address for sound adapter %s"),
- virDomainSoundModelTypeToString(vm->def->sounds[i]->model));
- return -1;
- }
- }
-
-
- if (vm->def->watchdog &&
- qemuProcessGetPCIWatchdogVendorProduct(vm->def->watchdog, &vendor, &product) == 0) {
- if (qemuProcessAssignNextPCIAddress(&(vm->def->watchdog->info),
- vendor, product,
- addrs, naddrs) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("cannot find PCI address for watchdog %s"),
- virDomainWatchdogModelTypeToString(vm->def->watchdog->model));
- return -1;
- }
- }
-
- if (vm->def->memballoon &&
- qemuProcessGetPCIMemballoonVendorProduct(vm->def->memballoon, &vendor, &product) == 0) {
- if (qemuProcessAssignNextPCIAddress(&(vm->def->memballoon->info),
- vendor, product,
- addrs, naddrs) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("cannot find PCI address for balloon %s"),
- virDomainMemballoonModelTypeToString(vm->def->memballoon->model));
- return -1;
- }
- }
-
- /* XXX console (virtio) */
-
-
- /* ... and now things we don't have in our xml */
-
- /* XXX USB controller ? */
-
- /* XXX what about other PCI devices (ie bridges) */
-
- return 0;
-}
-
-static int
-qemuProcessInitPCIAddresses(virQEMUDriverPtr driver,
- virDomainObjPtr vm,
- int asyncJob)
-{
- qemuDomainObjPrivatePtr priv = vm->privateData;
- int naddrs;
- int ret = -1;
- qemuMonitorPCIAddress *addrs = NULL;
-
- if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
- return -1;
- naddrs = qemuMonitorGetAllPCIAddresses(priv->mon,
- &addrs);
- if (qemuDomainObjExitMonitor(driver, vm) < 0)
- goto cleanup;
-
- if (naddrs > 0)
- ret = qemuProcessDetectPCIAddresses(vm, addrs, naddrs);
-
- cleanup:
- VIR_FREE(addrs);
-
- return ret;
-}
-
-
static int
qemuProcessPrepareChardevDevice(virDomainDefPtr def ATTRIBUTE_UNUSED,
virDomainChrDefPtr dev,
@@ -5616,14 +5222,6 @@ qemuProcessLaunch(virConnectPtr conn,
if (qemuProcessInitPasswords(conn, driver, vm, asyncJob) < 0)
goto cleanup;
- /* If we have -device, then addresses are assigned explicitly.
- * If not, then we have to detect dynamic ones here */
- if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
- VIR_DEBUG("Determining domain device PCI addresses");
- if (qemuProcessInitPCIAddresses(driver, vm, asyncJob) < 0)
- goto cleanup;
- }
-
/* set default link states */
/* qemu doesn't support setting this on the command line, so
* enter the monitor */
@@ -6420,14 +6018,6 @@ int qemuProcessAttach(virConnectPtr conn ATTRIBUTE_UNUSED,
if (qemuProcessDetectIOThreadPIDs(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
goto error;
- /* If we have -device, then addresses are assigned explicitly.
- * If not, then we have to detect dynamic ones here */
- if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
- VIR_DEBUG("Determining domain device PCI addresses");
- if (qemuProcessInitPCIAddresses(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
- goto error;
- }
-
VIR_DEBUG("Getting initial memory amount");
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorGetBalloonInfo(priv->mon, &vm->def->mem.cur_balloon) < 0)
--
2.7.3
More information about the libvir-list
mailing list