[libvirt] [PATCH 24/24] storage.html.in: Kill useless spaces in <pre/>
Michal Privoznik
mprivozn at redhat.com
Mon Nov 14 09:34:10 UTC 2016
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn at redhat.com>
---
docs/storage.html.in | 296 +++++++++++++++++++++++++--------------------------
1 file changed, 148 insertions(+), 148 deletions(-)
diff --git a/docs/storage.html.in b/docs/storage.html.in
index f1960f9..2e5b65e 100644
--- a/docs/storage.html.in
+++ b/docs/storage.html.in
@@ -135,12 +135,12 @@
<h3>Example pool input definition</h3>
<pre>
- <pool type="dir">
- <name>virtimages</name>
- <target>
- <path>/var/lib/virt/images</path>
- </target>
- </pool></pre>
+<pool type="dir">
+ <name>virtimages</name>
+ <target>
+ <path>/var/lib/virt/images</path>
+ </target>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
@@ -188,15 +188,15 @@
<h3>Example pool input</h3>
<pre>
- <pool type="fs">
- <name>virtimages</name>
- <source>
- <device path="/dev/VolGroup00/VirtImages"/>
- </source>
- <target>
- <path>/var/lib/virt/images</path>
- </target>
- </pool></pre>
+<pool type="fs">
+ <name>virtimages</name>
+ <source>
+ <device path="/dev/VolGroup00/VirtImages"/>
+ </source>
+ <target>
+ <path>/var/lib/virt/images</path>
+ </target>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
@@ -261,17 +261,17 @@
<h3>Example pool input</h3>
<pre>
- <pool type="netfs">
- <name>virtimages</name>
- <source>
- <host name="nfs.example.com"/>
- <dir path="/var/lib/virt/images"/>
- <format type='nfs'/>
- </source>
- <target>
- <path>/var/lib/virt/images</path>
- </target>
- </pool></pre>
+<pool type="netfs">
+ <name>virtimages</name>
+ <source>
+ <host name="nfs.example.com"/>
+ <dir path="/var/lib/virt/images"/>
+ <format type='nfs'/>
+ </source>
+ <target>
+ <path>/var/lib/virt/images</path>
+ </target>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
@@ -315,17 +315,17 @@
<h3>Example pool input</h3>
<pre>
- <pool type="logical">
- <name>HostVG</name>
- <source>
- <device path="/dev/sda1"/>
- <device path="/dev/sdb1"/>
- <device path="/dev/sdc1"/>
- </source>
- <target>
- <path>/dev/HostVG</path>
- </target>
- </pool></pre>
+<pool type="logical">
+ <name>HostVG</name>
+ <source>
+ <device path="/dev/sda1"/>
+ <device path="/dev/sdb1"/>
+ <device path="/dev/sdc1"/>
+ </source>
+ <target>
+ <path>/dev/HostVG</path>
+ </target>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
@@ -352,15 +352,15 @@
<h3>Example pool input</h3>
<pre>
- <pool type="disk">
- <name>sda</name>
- <source>
- <device path='/dev/sda'/>
- </source>
- <target>
- <path>/dev</path>
- </target>
- </pool></pre>
+<pool type="disk">
+ <name>sda</name>
+ <source>
+ <device path='/dev/sda'/>
+ </source>
+ <target>
+ <path>/dev</path>
+ </target>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
@@ -449,16 +449,16 @@
<h3>Example pool input</h3>
<pre>
- <pool type="iscsi">
- <name>virtimages</name>
- <source>
- <host name="iscsi.example.com"/>
- <device path="iqn.2013-06.com.example:iscsi-pool"/>
- </source>
- <target>
- <path>/dev/disk/by-path</path>
- </target>
- </pool></pre>
+<pool type="iscsi">
+ <name>virtimages</name>
+ <source>
+ <host name="iscsi.example.com"/>
+ <device path="iqn.2013-06.com.example:iscsi-pool"/>
+ </source>
+ <target>
+ <path>/dev/disk/by-path</path>
+ </target>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
@@ -482,15 +482,15 @@
<h3>Example pool input</h3>
<pre>
- <pool type="scsi">
- <name>virtimages</name>
- <source>
- <adapter name="host0"/>
- </source>
- <target>
- <path>/dev/disk/by-path</path>
- </target>
- </pool></pre>
+<pool type="scsi">
+ <name>virtimages</name>
+ <source>
+ <adapter name="host0"/>
+ </source>
+ <target>
+ <path>/dev/disk/by-path</path>
+ </target>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
@@ -518,12 +518,12 @@
<h3>Example pool input</h3>
<pre>
- <pool type="mpath">
- <name>virtimages</name>
- <target>
- <path>/dev/mapper</path>
- </target>
- </pool></pre>
+<pool type="mpath">
+ <name>virtimages</name>
+ <target>
+ <path>/dev/mapper</path>
+ </target>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
@@ -558,38 +558,38 @@
<h3>Example pool input</h3>
<pre>
- <pool type="rbd">
- <name>myrbdpool</name>
- <source>
- <name>rbdpool</name>
- <host name='1.2.3.4'/>
- <host name='my.ceph.monitor'/>
- <host name='third.ceph.monitor' port='6789'/>
- <auth username='admin' type='ceph'>
- <secret uuid='2ec115d7-3a88-3ceb-bc12-0ac909a6fd87'/>
- </auth>
- </source>
- </pool></pre>
+<pool type="rbd">
+ <name>myrbdpool</name>
+ <source>
+ <name>rbdpool</name>
+ <host name='1.2.3.4'/>
+ <host name='my.ceph.monitor'/>
+ <host name='third.ceph.monitor' port='6789'/>
+ <auth username='admin' type='ceph'>
+ <secret uuid='2ec115d7-3a88-3ceb-bc12-0ac909a6fd87'/>
+ </auth>
+ </source>
+</pool></pre>
<h3>Example volume output</h3>
<pre>
- <volume>
- <name>myvol</name>
- <key>rbd/myvol</key>
- <source>
- </source>
- <capacity unit='bytes'>53687091200</capacity>
- <allocation unit='bytes'>53687091200</allocation>
- <target>
- <path>rbd:rbd/myvol</path>
- <format type='unknown'/>
- <permissions>
- <mode>00</mode>
- <owner>0</owner>
- <group>0</group>
- </permissions>
- </target>
- </volume></pre>
+<volume>
+ <name>myvol</name>
+ <key>rbd/myvol</key>
+ <source>
+ </source>
+ <capacity unit='bytes'>53687091200</capacity>
+ <allocation unit='bytes'>53687091200</allocation>
+ <target>
+ <path>rbd:rbd/myvol</path>
+ <format type='unknown'/>
+ <permissions>
+ <mode>00</mode>
+ <owner>0</owner>
+ <group>0</group>
+ </permissions>
+ </target>
+</volume></pre>
<h3>Example disk attachment</h3>
<p>RBD images can be attached to Qemu guests when Qemu is built
@@ -622,33 +622,33 @@
<h3>Example pool input</h3>
<pre>
- <pool type="sheepdog">
- <name>mysheeppool</name>
- <source>
- <name>mysheeppool</name>
- <host name='localhost' port='7000'/>
- </source>
- </pool></pre>
+<pool type="sheepdog">
+ <name>mysheeppool</name>
+ <source>
+ <name>mysheeppool</name>
+ <host name='localhost' port='7000'/>
+ </source>
+</pool></pre>
<h3>Example volume output</h3>
<pre>
- <volume>
- <name>myvol</name>
- <key>sheep/myvol</key>
- <source>
- </source>
- <capacity unit='bytes'>53687091200</capacity>
- <allocation unit='bytes'>53687091200</allocation>
- <target>
- <path>sheepdog:myvol</path>
- <format type='unknown'/>
- <permissions>
- <mode>00</mode>
- <owner>0</owner>
- <group>0</group>
- </permissions>
- </target>
- </volume></pre>
+<volume>
+ <name>myvol</name>
+ <key>sheep/myvol</key>
+ <source>
+ </source>
+ <capacity unit='bytes'>53687091200</capacity>
+ <allocation unit='bytes'>53687091200</allocation>
+ <target>
+ <path>sheepdog:myvol</path>
+ <format type='unknown'/>
+ <permissions>
+ <mode>00</mode>
+ <owner>0</owner>
+ <group>0</group>
+ </permissions>
+ </target>
+</volume></pre>
<h3>Example disk attachment</h3>
<p>Sheepdog images can be attached to Qemu guests.
@@ -707,14 +707,14 @@
subdirectory relative to the gluster volume to use instead of
the top-level directory of the volume.</p>
<pre>
- <pool type="gluster">
- <name>myglusterpool</name>
- <source>
- <name>volname</name>
- <host name='localhost'/>
- <dir path='/'/>
- </source>
- </pool></pre>
+<pool type="gluster">
+ <name>myglusterpool</name>
+ <source>
+ <name>volname</name>
+ <host name='localhost'/>
+ <dir path='/'/>
+ </source>
+</pool></pre>
<h3>Example volume output</h3>
<p>Libvirt storage volumes associated with a gluster pool
@@ -726,14 +726,14 @@
URI of the volume but it may be changed to a UUID of the volume
in the future.</p>
<pre>
- <volume>
- <name>myfile</name>
- <key>gluster://localhost/volname/myfile</key>
- <source>
- </source>
- <capacity unit='bytes'>53687091200</capacity>
- <allocation unit='bytes'>53687091200</allocation>
- </volume></pre>
+<volume>
+ <name>myfile</name>
+ <key>gluster://localhost/volname/myfile</key>
+ <source>
+ </source>
+ <capacity unit='bytes'>53687091200</capacity>
+ <allocation unit='bytes'>53687091200</allocation>
+</volume></pre>
<h3>Example disk attachment</h3>
<p>Files within a gluster volume can be attached to Qemu guests.
@@ -773,14 +773,14 @@
<h3>Example pool input</h3>
<pre>
- <pool type="zfs">
- <name>myzfspool</name>
- <source>
- <name>zpoolname</name>
- <device path="/dev/ada1"/>
- <device path="/dev/ada2"/>
- </source>
- </pool></pre>
+<pool type="zfs">
+ <name>myzfspool</name>
+ <source>
+ <name>zpoolname</name>
+ <device path="/dev/ada1"/>
+ <device path="/dev/ada2"/>
+ </source>
+</pool></pre>
<h3>Valid pool format types</h3>
<p>
--
2.8.4
More information about the libvir-list
mailing list