[libvirt] [PATCH v4 15/25] [NEW] qemu: set pciConnectFlags to 0 instead of PCI|HOTPLUGGABLE if device isn't PCI
Laine Stump
laine at laine.org
Fri Oct 14 19:54:11 UTC 2016
This patch cleans up the connect flags for certain types/models of
devices that aren't PCI to return 0. In the future that may be used as
an indicator to the caller about whether or not a device needs a PCI
address. For now it's just ignored, except for in
virDomainPCIAddressEnsureAddr() - called during device hotplug - (and
in some cases actually needs to be re-set to PCI|HOTPLUGGABLE just in
case someone (in some old config) has manually set a PCI address for a
device that isn't PCI.
---
This was previously a part of patch 12. split out to enable
demonstrating that it is a NOP.
src/conf/domain_addr.c | 6 +++++
src/qemu/qemu_domain_address.c | 54 +++++++++++++++++++++++++-----------------
2 files changed, 38 insertions(+), 22 deletions(-)
diff --git a/src/conf/domain_addr.c b/src/conf/domain_addr.c
index fcd5fc1..e25a63f 100644
--- a/src/conf/domain_addr.c
+++ b/src/conf/domain_addr.c
@@ -491,6 +491,12 @@ virDomainPCIAddressEnsureAddr(virDomainPCIAddressSetPtr addrs,
int ret = -1;
char *addrStr = NULL;
+ /* if flags is 0, the particular model of this device on this
+ * machinetype doesn't need a PCI address, so we're done.
+ */
+ if (!flags)
+ return 0;
+
if (!(addrStr = virDomainPCIAddressAsString(&dev->addr.pci)))
goto cleanup;
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 991cfa7..22d859e 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -465,8 +465,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_CONTROLLER_MODEL_USB_QUSB2: /* xen only */
case VIR_DOMAIN_CONTROLLER_MODEL_USB_NONE:
case VIR_DOMAIN_CONTROLLER_MODEL_USB_LAST:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
case VIR_DOMAIN_CONTROLLER_TYPE_IDE:
@@ -495,8 +494,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
*/
if (net->type == VIR_DOMAIN_NET_TYPE_HOSTDEV ||
STREQ(net->model, "usb-net")) {
- /* should be 0 */
- return pciFlags;
+ return 0;
}
return pciFlags;
}
@@ -513,8 +511,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_SOUND_MODEL_PCSPK:
case VIR_DOMAIN_SOUND_MODEL_USB:
case VIR_DOMAIN_SOUND_MODEL_LAST:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
case VIR_DOMAIN_DEVICE_DISK:
@@ -531,8 +528,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_DISK_BUS_SATA:
case VIR_DOMAIN_DISK_BUS_SD:
case VIR_DOMAIN_DISK_BUS_LAST:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
case VIR_DOMAIN_DEVICE_HOSTDEV:
@@ -546,8 +542,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_MEMBALLOON_MODEL_XEN:
case VIR_DOMAIN_MEMBALLOON_MODEL_NONE:
case VIR_DOMAIN_MEMBALLOON_MODEL_LAST:
- /* should be 0 (not PCI) */
- return pciFlags;
+ return 0;
}
case VIR_DOMAIN_DEVICE_RNG:
@@ -556,8 +551,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
return pciFlags;
case VIR_DOMAIN_RNG_MODEL_LAST:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
case VIR_DOMAIN_DEVICE_WATCHDOG:
@@ -569,8 +563,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_WATCHDOG_MODEL_IB700:
case VIR_DOMAIN_WATCHDOG_MODEL_DIAG288:
case VIR_DOMAIN_WATCHDOG_MODEL_LAST:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
case VIR_DOMAIN_DEVICE_VIDEO:
@@ -586,8 +579,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
return pciFlags;
case VIR_DOMAIN_VIDEO_TYPE_LAST:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
@@ -604,8 +596,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_INPUT_BUS_XEN:
case VIR_DOMAIN_INPUT_BUS_PARALLELS:
case VIR_DOMAIN_INPUT_BUS_LAST:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
case VIR_DOMAIN_DEVICE_CHR:
@@ -616,8 +607,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA:
case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_USB:
case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_LAST:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
/* These devices don't ever connect with PCI */
@@ -634,8 +624,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_DEVICE_IOMMU:
case VIR_DOMAIN_DEVICE_LAST:
case VIR_DOMAIN_DEVICE_NONE:
- /* should be 0 */
- return pciFlags;
+ return 0;
}
/* We can never get here, because all cases are covered in the
@@ -825,6 +814,27 @@ qemuDomainCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
return 0;
}
+ /* If we get to here, the device has a PCI address assigned in the
+ * config and we should mark it as in-use. But if the
+ * pciConnectFlags are 0, then this device shouldn't have a PCI
+ * address associated with it. *BUT* since there are cases in the
+ * past where we've apparently allowed that, we need to pretend
+ * for now that it's okay, otherwise an existing domain could
+ * "disappear" from the list of domains due to a parse failure. We
+ * can fix this by just forcing the pciConnectFlags to be
+ * PCI_DEVICE (and then relying on validation functions to report
+ * inappropriate address types.
+ */
+ if (info->pciConnectFlags == 0) {
+ char *addrStr = virDomainPCIAddressAsString(&info->addr.pci);
+
+ VIR_WARN("qemuDomainDeviceCalculatePCIConnectFlags() thinks that the "
+ "device with PCI address %s should not have a PCI address",
+ addrStr ? addrStr : "(unknown)");
+ VIR_FREE(addrStr);
+ info->pciConnectFlags = VIR_PCI_CONNECT_TYPE_PCI_DEVICE;
+ }
+
/* Ignore implicit controllers on slot 0:0:1.0:
* implicit IDE controller on 0:0:1.1 (no qemu command line)
* implicit USB controller on 0:0:1.2 (-usb)
--
2.7.4
More information about the libvir-list
mailing list