[libvirt] [PATCH v2 01/11] util: new functions virNetDev(Save|Read|Set)NetConfig()
Laine Stump
laine at laine.org
Fri Mar 24 05:02:25 UTC 2017
These three functions are destined to replace
virNetDev(Replace|Restore)NetConfig() and
virNetDev(Replace|Restore)MacAddress(), which both do the save and set
together as a single step. We need to separate the save, read, and set
steps because there will be situations where we need to do something
else in between (in particular, we will need to rebind a VF's driver
after save but before set).
This patch creates the new functions, but doesn't call them - that
will come in a subsequent patch. Note that the new functions to
read/write the file that stores the original network config now uses
JSON rather than plaintext (it still recognizes the old format as well
though, so it won't get confused during an upgrade).
---
Change from V1: use JSON for the data file, at mprivozn's suggestion
(and with his assistance writing the code :-)
src/libvirt_private.syms | 3 +
src/util/virnetdev.c | 590 ++++++++++++++++++++++++++++++++++++++++++++++-
src/util/virnetdev.h | 22 ++
3 files changed, 613 insertions(+), 2 deletions(-)
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms
index e99bdb0..7e9334a 100644
--- a/src/libvirt_private.syms
+++ b/src/libvirt_private.syms
@@ -2011,6 +2011,7 @@ virNetDevIfStateTypeFromString;
virNetDevIfStateTypeToString;
virNetDevIsVirtualFunction;
virNetDevPFGetVF;
+virNetDevReadNetConfig;
virNetDevReplaceMacAddress;
virNetDevReplaceNetConfig;
virNetDevRestoreMacAddress;
@@ -2020,11 +2021,13 @@ virNetDevRxFilterFree;
virNetDevRxFilterModeTypeFromString;
virNetDevRxFilterModeTypeToString;
virNetDevRxFilterNew;
+virNetDevSaveNetConfig;
virNetDevSetMAC;
virNetDevSetMTU;
virNetDevSetMTUFromDevice;
virNetDevSetName;
virNetDevSetNamespace;
+virNetDevSetNetConfig;
virNetDevSetOnline;
virNetDevSetPromiscuous;
virNetDevSetRcvAllMulti;
diff --git a/src/util/virnetdev.c b/src/util/virnetdev.c
index b9e9cbe..c2d7a2f 100644
--- a/src/util/virnetdev.c
+++ b/src/util/virnetdev.c
@@ -33,6 +33,7 @@
#include "virlog.h"
#include "virstring.h"
#include "virutil.h"
+#include "virjson.h"
#include <sys/ioctl.h>
#include <net/if.h>
@@ -1971,7 +1972,551 @@ virNetDevRestoreNetConfig(const char *linkdev, int vf, const char *stateDir)
return ret;
}
-#else /* defined(__linux__) && defined(HAVE_LIBNL) */
+# define VIR_NETDEV_KEYNAME_ADMIN_MAC "adminMac"
+# define VIR_NETDEV_KEYNAME_VLAN_TAG "vlanTag"
+# define VIR_NETDEV_KEYNAME_MAC "mac"
+
+/**
+ * virNetDevSaveNetConfig:
+ * @linkdev: name of the interface
+ * @vf: vf index if linkdev is a pf
+ * @stateDir: directory to store old net config
+ * @saveVlan: false if we shouldn't attempt to save vlan tag info
+ * (eg for interfaces using 802.1Qbg, since it handles
+ * vlan tags internally)
+ *
+ * Save current MAC address and (if linkdev itself is a VF, or if @vf
+ * >= 0) the "admin MAC address" and vlan tag the device described by
+ * @linkdev:@vf to @stateDir. (the "admin MAC address" is stored in
+ * the PF, and is what the VF MAC will be initialized to the next time
+ * its driver is reloaded (either on host or guest).
+ *
+ * File Format:
+ *
+ * The file is in json format and will contain 1 or more of the
+ * following values:
+ *
+ * "mac" - VF MAC address (or missing if VF has no host net driver)
+ * "vlanTag" - a single vlan tag id
+ * "adminMac" - admin MAC address (stored in the PF)
+ *
+ * For example:
+ *
+ * {"mac": "9A:11:22:33:44:55",
+ * "vlanTag": "42",
+ * "adminMac": "00:00:00:00:00:00"
+ * }
+ *
+ * File Name:
+ *
+ * If the device is a VF and we're allowed to save vlan tag info, the
+ * file will be named ${pfDevName_vf#{vf} (e.g. "enp2s0f0_vf5") and
+ * will contain at least "adminMac" and "vlanTag" (if the device was bound
+ * to a net driver on the host prior to use, it will also have "mac"..
+ * If the device isn't a VF, or we're not allowed to save vlan tag
+ * info, the file will be named ${linkdev} (e.g. "enp3s0f0") and will
+ * contain just linkdev's MAC address.
+ *
+ * Returns 0 on success, -1 on failure
+ *
+ */
+int
+virNetDevSaveNetConfig(const char *linkdev, int vf,
+ const char *stateDir,
+ bool saveVlan)
+{
+ int ret = -1;
+ const char *pfDevName = NULL;
+ char *pfDevOrig = NULL;
+ char *vfDevOrig = NULL;
+ virMacAddr oldMAC;
+ char MACStr[VIR_MAC_STRING_BUFLEN];
+ int oldVlanTag = -1;
+ char *filePath = NULL;
+ char *fileStr = NULL;
+ virJSONValuePtr configJSON = NULL;
+
+ if (vf >= 0) {
+ /* linkdev is the PF */
+ pfDevName = linkdev;
+
+ /* linkdev should get the VF's netdev name (or NULL if none) */
+ if (virNetDevPFGetVF(pfDevName, vf, &vfDevOrig) < 0)
+ goto cleanup;
+
+ linkdev = vfDevOrig;
+
+ } else if (saveVlan && virNetDevIsVirtualFunction(linkdev) == 1) {
+ /* when vf is -1, linkdev might be a standard netdevice (not
+ * SRIOV), or it might be an SRIOV VF. If it's a VF, normalize
+ * it to PF + VFname
+ */
+
+ if (virNetDevGetPhysicalFunction(linkdev, &pfDevOrig) < 0)
+ goto cleanup;
+
+ pfDevName = pfDevOrig;
+
+ if (virNetDevGetVirtualFunctionIndex(pfDevName, linkdev, &vf) < 0)
+ goto cleanup;
+ }
+
+ if (!(configJSON = virJSONValueNewObject()))
+ goto cleanup;
+
+ /* if there is a PF, it's now in pfDevName, and linkdev is either
+ * the VF's name, or NULL (if the VF isn't bound to a net driver
+ * on the host)
+ */
+
+ if (pfDevName) {
+ if (virAsprintf(&filePath, "%s/%s_vf%d", stateDir, pfDevName, vf) < 0)
+ goto cleanup;
+
+ /* get admin MAC and vlan tag */
+ if (virNetDevGetVfConfig(pfDevName, vf, &oldMAC,
+ saveVlan ? &oldVlanTag : NULL) < 0) {
+ goto cleanup;
+ }
+
+ if (virJSONValueObjectAppendString(configJSON,
+ VIR_NETDEV_KEYNAME_ADMIN_MAC,
+ virMacAddrFormat(&oldMAC, MACStr)) < 0 ||
+ virJSONValueObjectAppendNumberInt(configJSON,
+ VIR_NETDEV_KEYNAME_VLAN_TAG,
+ oldVlanTag) < 0) {
+ goto cleanup;
+ }
+
+ } else {
+ if (virAsprintf(&filePath, "%s/%s", stateDir, linkdev) < 0)
+ goto cleanup;
+ }
+
+ if (linkdev) {
+ if (virNetDevGetMAC(linkdev, &oldMAC) < 0)
+ goto cleanup;
+
+ /* for interfaces with no pfDevName (i.e. not a VF, this will
+ * be the only value in the file.
+ */
+ if (virJSONValueObjectAppendString(configJSON, VIR_NETDEV_KEYNAME_MAC,
+ virMacAddrFormat(&oldMAC, MACStr)) < 0)
+ goto cleanup;
+ }
+
+ if (!(fileStr = virJSONValueToString(configJSON, true)))
+ goto cleanup;
+
+ if (virFileWriteStr(filePath, fileStr, O_CREAT|O_TRUNC|O_WRONLY) < 0) {
+ virReportSystemError(errno, _("Unable to preserve mac/vlan tag "
+ "for device = %s, vf = %d"), linkdev, vf);
+ goto cleanup;
+ }
+
+ ret = 0;
+ cleanup:
+ VIR_FREE(pfDevOrig);
+ VIR_FREE(vfDevOrig);
+ VIR_FREE(filePath);
+ VIR_FREE(fileStr);
+ virJSONValueFree(configJSON);
+ return ret;
+}
+
+
+/**
+ * virNetDevReadNetConfig:
+ * @linkdev: name of the interface
+ * @vf: vf index if linkdev is a pf
+ * @stateDir: directory where net config is stored
+ * @adminMAC: returns admin MAC to store in the PF (if this is a VF)
+ * @MAC: returns MAC to set on device immediately
+ *
+ * Read saved MAC address and (if linkdev itself is a VF, or if @vf >=
+ * 0) "admin MAC address" and vlan tag of the device described by
+ * @linkdev:@vf from a file in @stateDir. (see virNetDevSaveNetConfig
+ * for details of file name and format).
+ *
+ * Returns 0 on success, -1 on failure.
+ *
+ * The caller MUST free adminMAC, vlan, and MAC when it is finished
+ * with them (they will be NULL if they weren't found in the file)
+ *
+ */
+int
+virNetDevReadNetConfig(const char *linkdev, int vf,
+ const char *stateDir,
+ virMacAddrPtr *adminMAC,
+ virNetDevVlanPtr *vlan,
+ virMacAddrPtr *MAC)
+{
+ int ret = -1;
+ const char *pfDevName = NULL;
+ char *pfDevOrig = NULL;
+ char *vfDevOrig = NULL;
+ char *filePath = NULL;
+ char *fileStr = NULL;
+ virJSONValuePtr configJSON = NULL;
+ const char *MACStr = NULL;
+ const char *adminMACStr = NULL;
+ int vlanTag = -1;
+
+ *adminMAC = NULL;
+ *vlan = NULL;
+ *MAC = NULL;
+
+ if (vf >= 0) {
+ /* linkdev is the PF */
+ pfDevName = linkdev;
+
+ /* linkdev should get the VF's netdev name (or NULL if none) */
+ if (virNetDevPFGetVF(pfDevName, vf, &vfDevOrig) < 0)
+ goto cleanup;
+
+ linkdev = vfDevOrig;
+
+ } else if (virNetDevIsVirtualFunction(linkdev) == 1) {
+ /* when vf is -1, linkdev might be a standard netdevice (not
+ * SRIOV), or it might be an SRIOV VF. If it's a VF, normalize
+ * it to PF + VFname
+ */
+
+ if (virNetDevGetPhysicalFunction(linkdev, &pfDevOrig) < 0)
+ goto cleanup;
+
+ pfDevName = pfDevOrig;
+
+ if (virNetDevGetVirtualFunctionIndex(pfDevName, linkdev, &vf) < 0)
+ goto cleanup;
+ }
+
+ /* if there is a PF, it's now in pfDevName, and linkdev is either
+ * the VF's name, or NULL (if the VF isn't bound to a net driver
+ * on the host)
+ */
+
+ if (pfDevName) {
+ if (virAsprintf(&filePath, "%s/%s_vf%d", stateDir, pfDevName, vf) < 0)
+ goto cleanup;
+
+ if (linkdev && !virFileExists(filePath)) {
+ /* the device may have been stored in a file named for the
+ * VF due to saveVlan == false (or an older version of
+ * libvirt), so reset filePath so we'll try the other
+ * filename before failing.
+ */
+ VIR_FREE(filePath);
+ pfDevName = NULL;
+ }
+ }
+
+ if (!pfDevName) {
+ if (virAsprintf(&filePath, "%s/%s", stateDir, linkdev) < 0)
+ goto cleanup;
+ }
+
+ if (virFileReadAll(filePath, 128, &fileStr) < 0)
+ goto cleanup;
+
+ if (strchr("0123456789abcdefABCDEF", fileStr[0])) {
+ const char *vlanStr = NULL;
+
+ /* old version of file - just two lines of text. Line 1 is the
+ * MAC address (or if line 2 is present, line 1 is adminMAC),
+ * and line 2 (if present) is the vlan tag
+ */
+
+ if ((vlanStr = strchr(fileStr, '\n'))) {
+ char *endptr;
+
+ /* if there are 2 lines, the first is adminMAC */
+ adminMACStr = fileStr;
+ vlanStr++;
+
+ if ((virStrToLong_i(vlanStr, &endptr, 10, &vlanTag) < 0) ||
+ (endptr && *endptr != '\n' && *endptr != 0)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("cannot parse vlan tag '%s' from file '%s'"),
+ vlanStr, filePath);
+ goto cleanup;
+ }
+ } else {
+ /* if there is only one line, it is MAC */
+ MACStr = fileStr;
+ }
+ } else {
+ /* if it doesn't start with a hex digit, it is a modern
+ * version of the config file - JSON format as described in
+ * preamble to virNetDevSaveNetConfig()
+ */
+ if (!(configJSON = virJSONValueFromString(fileStr))) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("invalid json in net device saved "
+ "config file '%s': '%.60s'"),
+ filePath, fileStr);
+ goto cleanup;
+ }
+
+ MACStr = virJSONValueObjectGetString(configJSON,
+ VIR_NETDEV_KEYNAME_MAC);
+ adminMACStr = virJSONValueObjectGetString(configJSON,
+ VIR_NETDEV_KEYNAME_ADMIN_MAC);
+ ignore_value(virJSONValueObjectGetNumberInt(configJSON,
+ VIR_NETDEV_KEYNAME_VLAN_TAG,
+ &vlanTag));
+
+ if (!(MACStr || adminMACStr)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("network device saved config file '%s' "
+ "has unexpected contents, missing both "
+ "'MAC' and 'adminMAC': '%.60s'"),
+ filePath, fileStr);
+ goto cleanup;
+ }
+ }
+
+ if (MACStr) {
+ if (VIR_ALLOC(*MAC) < 0)
+ goto cleanup;
+
+ if (virMacAddrParse(MACStr, *MAC) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("cannot parse MAC address '%s' from file '%s'"),
+ MACStr, filePath);
+ goto cleanup;
+ }
+ }
+
+ if (adminMACStr) {
+ if (VIR_ALLOC(*adminMAC) < 0)
+ goto cleanup;
+
+ if (virMacAddrParse(adminMACStr, *adminMAC) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("cannot parse MAC address '%s' from file '%s'"),
+ adminMACStr, filePath);
+ goto cleanup;
+ }
+ }
+
+ if (vlanTag != -1) {
+ /* construct a simple virNetDevVlan object with a single tag */
+ if (VIR_ALLOC(*vlan) < 0)
+ goto cleanup;
+ if (VIR_ALLOC((*vlan)->tag) < 0)
+ goto cleanup;
+ (*vlan)->nTags = 1;
+ (*vlan)->tag[0] = vlanTag;
+ }
+
+ /* we won't need the file again */
+ ignore_value(unlink(filePath));
+
+ ret = 0;
+ cleanup:
+ if (ret < 0) {
+ VIR_FREE(*adminMAC);
+ VIR_FREE(*MAC);
+ VIR_FREE(*vlan);
+ }
+
+ VIR_FREE(pfDevOrig);
+ VIR_FREE(vfDevOrig);
+ VIR_FREE(filePath);
+ VIR_FREE(fileStr);
+ virJSONValueFree(configJSON);
+ return ret;
+}
+
+
+/**
+ * virNetDevSetNetConfig:
+ * @linkdev: name of the interface
+ * @vf: vf index if linkdev is a PF
+ * @adminMAC: new admin MAC address (will be stored in PF and
+ * used for next initialization of VF driver)
+ * @vlan: new vlan tag info (or NULL)
+ * @MAC: new MAC address to set on the device immediately
+ * @setVlan: true to enable setting vlan tag (even if @vlan is NULL,
+ * the interface vlan tag will be set to 0).
+ *
+ *
+ * Set new MAC address and (optionally) admin MAC and vlan tag of
+ * @linkdev VF# @vf.
+ *
+ * Returns 0 on success, -1 on failure
+ *
+ */
+int
+virNetDevSetNetConfig(const char *linkdev, int vf,
+ const virMacAddr *adminMAC,
+ virNetDevVlanPtr vlan,
+ const virMacAddr *MAC,
+ bool setVlan)
+{
+ int ret = -1;
+ char MACStr[VIR_MAC_STRING_BUFLEN];
+ const char *pfDevName = NULL;
+ char *pfDevOrig = NULL;
+ char *vfDevOrig = NULL;
+ int vlanTag = -1;
+
+ if (vf >= 0) {
+ /* linkdev is the PF */
+ pfDevName = linkdev;
+
+ /* linkdev should get the VF's netdev name (or NULL if none) */
+ if (virNetDevPFGetVF(pfDevName, vf, &vfDevOrig) < 0)
+ goto cleanup;
+
+ linkdev = vfDevOrig;
+
+ } else if (virNetDevIsVirtualFunction(linkdev) == 1) {
+ /* when vf is -1, linkdev might be a standard netdevice (not
+ * SRIOV), or it might be an SRIOV VF. If it's a VF, normalize
+ * it to PF + VFname
+ */
+
+ if (virNetDevGetPhysicalFunction(linkdev, &pfDevOrig) < 0)
+ goto cleanup;
+
+ pfDevName = pfDevOrig;
+
+ if (virNetDevGetVirtualFunctionIndex(pfDevName, linkdev, &vf) < 0)
+ goto cleanup;
+ }
+
+
+ if (!pfDevName) {
+ /* if it's not SRIOV, then we can't set the admin MAC address
+ * or vlan tag
+ */
+ if (adminMAC) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("admin MAC can only be set for SR-IOV VFs, but "
+ "%s is not a VF"), linkdev);
+ goto cleanup;
+ }
+
+ if (vlan) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("vlan can only be set for SR-IOV VFs, but "
+ "%s is not a VF"), linkdev);
+ goto cleanup;
+ }
+
+ } else {
+ bool pfIsOnline;
+
+ /* Assure that PF is online before trying to use it to set
+ * anything up for this VF. It *should* be online already,
+ * but if it isn't online the changes made to the VF via the
+ * PF won't take effect, yet there will be no error
+ * reported. In the case that the PF isn't online, we need to
+ * fail and report the error, rather than automatically
+ * setting it online, since setting an unconfigured interface
+ * online automatically turns on IPv6 autoconfig, which may
+ * not be what the admin expects, so we require them to
+ * explicitly enable the PF in the host system network config.
+ */
+ if (virNetDevGetOnline(pfDevName, &pfIsOnline) < 0)
+ goto cleanup;
+
+ if (!pfIsOnline) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Unable to configure VF %d of PF '%s' "
+ "because the PF is not online. Please "
+ "change host network config to put the "
+ "PF online."),
+ vf, pfDevName);
+ goto cleanup;
+ }
+
+ if (vlan) {
+ if (vlan->nTags != 1 || vlan->trunk) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("vlan trunking is not supported "
+ "by SR-IOV network devices"));
+ goto cleanup;
+ }
+
+ if (!setVlan) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("vlan tag set for interface %s but "
+ "caller requested it not be set"));
+ goto cleanup;
+ }
+
+ vlanTag = vlan->tag[0];
+
+ } else if (setVlan) {
+ vlanTag = 0; /* assure any existing vlan tag is reset */
+ }
+ }
+
+ if (MAC) {
+ if (!linkdev) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("VF %d of PF '%s' is not bound to a net driver, "
+ "so its MAC address cannot be set to %s"),
+ vf, pfDevName, virMacAddrFormat(MAC, MACStr));
+ goto cleanup;
+ }
+
+ if (virNetDevSetMAC(linkdev, MAC) < 0) {
+ /* This may have failed due to the "administratively
+ * set" flag being set in the PF for this VF. For now
+ * we will just fail, but in the future we should
+ * attempt to set the VF MAC via the PF.
+ */
+ goto cleanup;
+ }
+ if (pfDevOrig) {
+ /* if pfDevOrig is set, it means that the caller was
+ * *really* only interested in setting the MAC of the VF
+ * itself, *not* the admin MAC via the PF. In those cases,
+ * the adminMAC was only provided in case we need to set
+ * the VF's MAC by temporarily unbinding/rebinding the
+ * VF's net driver with the admin MAC set to the desired
+ * MAC, and then want to restore the admin MAC to its
+ * original setting when we're finished. We would only
+ * need to do that if the virNetDevSetMAC() above had
+ * failed; since it didn't, we don't need to set the
+ * adminMAC, so we are NULLing it out here to avoid that
+ * below.
+
+ * (NB: since setting the admin MAC sets the
+ * "administratively set" flag for the VF in the PF's
+ * driver, which prevents any future changes to the VF's
+ * MAC address, we want to avoid setting the admin MAC as
+ * much as possible.)
+ */
+ adminMAC = NULL;
+ }
+ }
+
+ if (adminMAC || vlanTag >= 0) {
+ /* Set vlanTag and admin MAC using an RTM_SETLINK request sent to
+ * PFdevname+VF#, if mac != NULL this will set the "admin MAC" via
+ * the PF, *not* the actual VF MAC - the admin MAC only takes
+ * effect the next time the VF's driver is initialized (either in
+ * guest or host). if there is a vlanTag to set, it will take
+ * effect immediately though.
+ */
+ if (virNetDevSetVfConfig(pfDevName, vf, adminMAC, vlanTag) < 0)
+ goto cleanup;
+ }
+
+ ret = 0;
+ cleanup:
+ VIR_FREE(pfDevOrig);
+ VIR_FREE(vfDevOrig);
+ return ret;
+}
+
+
+#else /* defined(__linux__) && defined(HAVE_LIBNL) && defined(IFLA_VF_MAX) */
int
virNetDevReplaceNetConfig(const char *linkdev ATTRIBUTE_UNUSED,
@@ -1996,7 +2541,48 @@ virNetDevRestoreNetConfig(const char *linkdev ATTRIBUTE_UNUSED,
return -1;
}
-#endif /* defined(__linux__) && defined(HAVE_LIBNL) */
+
+int
+virNetDevSaveNetConfig(const char *linkdev ATTRIBUTE_UNUSED,
+ int vf ATTRIBUTE_UNUSED,
+ const char *stateDir ATTRIBUTE_UNUSED,
+ bool saveVlan ATTRIBUTE_UNUSED)
+{
+ virReportSystemError(ENOSYS, "%s",
+ _("Unable to save net device config on this platform"));
+ return -1;
+}
+
+
+int
+virNetDevReadNetConfig(const char *linkdev ATTRIBUTE_UNUSED,
+ int vf ATTRIBUTE_UNUSED,
+ const char *stateDir ATTRIBUTE_UNUSED,
+ virMacAddrPtr *adminMAC ATTRIBUTE_UNUSED,
+ virNetDevVLanPtr *vlan ATTRIBUTE_UNUSED,
+ virMacAddrPtr *MAC ATTRIBUTE_UNUSED)
+{
+ virReportSystemError(ENOSYS, "%s",
+ _("Unable to read net device config on this platform"));
+ return -1;
+}
+
+
+int
+virNetDevSetNetConfig(const char *linkdev ATTRIBUTE_UNUSED,
+ int vf ATTRIBUTE_UNUSED,
+ const virMacAddr *adminMAC ATTRIBUTE_UNUSED,
+ virNetDevVlanPtr vlan ATTRIBUTE_UNUSED,
+ const virMacAddr *MAC ATTRIBUTE_UNUSED,
+ bool setVlan ATTRIBUTE_UNUSED)
+{
+ virReportSystemError(ENOSYS, "%s",
+ _("Unable to set net device config on this platform"));
+ return -1;
+}
+
+
+#endif /* defined(__linux__) && defined(HAVE_LIBNL) && defined(IFLA_VF_MAX) */
VIR_ENUM_IMPL(virNetDevIfState,
VIR_NETDEV_IF_STATE_LAST,
diff --git a/src/util/virnetdev.h b/src/util/virnetdev.h
index 01f6d8b..00f94b7 100644
--- a/src/util/virnetdev.h
+++ b/src/util/virnetdev.h
@@ -194,6 +194,28 @@ int virNetDevGetVirtualFunctions(const char *pfname,
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3)
ATTRIBUTE_NONNULL(4) ATTRIBUTE_NONNULL(5) ATTRIBUTE_RETURN_CHECK;
+int virNetDevSaveNetConfig(const char *linkdev, int vf,
+ const char *stateDir,
+ bool saveVlan)
+ ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(3) ATTRIBUTE_RETURN_CHECK;
+
+int
+virNetDevReadNetConfig(const char *linkdev, int vf,
+ const char *stateDir,
+ virMacAddrPtr *adminMAC,
+ virNetDevVlanPtr *vlan,
+ virMacAddrPtr *MAC)
+ ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(3) ATTRIBUTE_NONNULL(4)
+ ATTRIBUTE_NONNULL(5) ATTRIBUTE_NONNULL(6) ATTRIBUTE_RETURN_CHECK;
+
+int
+virNetDevSetNetConfig(const char *linkdev, int vf,
+ const virMacAddr *adminMAC,
+ virNetDevVlanPtr vlan,
+ const virMacAddr *MAC,
+ bool setVLan)
+ ATTRIBUTE_NONNULL(1) ATTRIBUTE_RETURN_CHECK;
+
int virNetDevReplaceNetConfig(const char *linkdev, int vf,
const virMacAddr *macaddress,
virNetDevVlanPtr vlan,
--
2.9.3
More information about the libvir-list
mailing list