[libvirt] [PATCH] Add some news items for the 3.4.0 release
Martin Kletzander
mkletzan at redhat.com
Wed May 31 15:44:58 UTC 2017
On Wed, May 31, 2017 at 05:35:52PM +0200, Martin Kletzander wrote:
>On Wed, May 31, 2017 at 04:22:07PM +0200, Peter Krempa wrote:
>>On Wed, May 31, 2017 at 16:06:48 +0200, Martin Kletzander wrote:
>>> Signed-off-by: Martin Kletzander <mkletzan at redhat.com>
>>> ---
>>> I could not be bothered to split the patches. Also, please review
>>> whatever you know about as this is just a compilation of stuff from
>>> the git log.
>>>
>>> docs/news.xml | 166 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>>> 1 file changed, 165 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/docs/news.xml b/docs/news.xml
>>> index 649350a904d3..d34e8beae4c0 100644
>>> --- a/docs/news.xml
>>> +++ b/docs/news.xml
>>> @@ -45,6 +45,38 @@
>>
>>[...]
>>
>>> + <change>
>>> + <summary>
>>> + Repository now has new README.md file
>>> + </summary>
>>> + <description>
>>> + The new file uses markdown syntax, so it looks better on
>>> + github and possibly other web pages, but it has also more
>>> + useful information. The old README is now symlink to the
>>> + new file.
>>> + </description>
>>> + </change>
>>
>>This does not seem to be a feature to me in any possible way.
>>
>
>I probably wanted to put it in Improvements, can that be?
>
>>> @@ -67,10 +99,142 @@
>>
>>[...]
>>
>>> + <change>
>>> + <summary>
>>> + libxl: NUMA sibling distances are now reported in host capabilities
>>> + </summary>
>>> + </change>
>>> + <change>
>>> + <summary>
>>> + Support for VMDK files with version 3
>>> + </summary>
>>> + <description>
>>> + VMDK version 3 files are now properly detected.
>>
>>Was this description suggested by the department of redundancy
>>department?
>>
>
>I'll go with just "VMDK version 3 files are now properly detected" as a summary.
>
>
>>> + </description>
>>> + </change>
>>> + <change>
>>> + <summary>
>>> + Interrupt remapping and Extended interrupt mode for IOMMU devices
>>> + </summary>
>>> + <description>
>>> + These two new features can now be controlled with new
>>> + <code><driver intremap='on/off' eim='on/off'/></code>
>>> + tag for <code>iommu</code> devices.
>>> + </description>
>>> + </change>
>>
>>Why was the other iommu change considered a feature and this is an
>>improvement?
>>
>
>What other iommu change? I can't find any in this file.
>
>>
>>ACK to everything excepthe readme.md section.
>
>Please, reconsider with this squashed in, since there was off-list reply
>with double spaces as well:
>
>diff --git i/docs/news.xml w/docs/news.xml
>index d34e8beae4c0..b351f22990a1 100644
>--- i/docs/news.xml
>+++ w/docs/news.xml
>@@ -57,17 +57,6 @@
> </change>
> <change>
> <summary>
>- Repository now has new README.md file
>- </summary>
>- <description>
>- The new file uses markdown syntax, so it looks better on
>- github and possibly other web pages, but it has also more
>- useful information. The old README is now symlink to the
>- new file.
>- </description>
>- </change>
>- <change>
>- <summary>
> The reason for VM shutdown is reported, if known
> </summary>
> <description>
>@@ -81,6 +70,17 @@
> <section title="Improvements">
> <change>
> <summary>
>+ Repository now has new README.md file
>+ </summary>
>+ <description>
>+ The new file uses markdown syntax, so it looks better on
>+ github and possibly other web pages, but it has also more
>+ useful information. The old README is now symlink to the
>+ new file.
>+ </description>
>+ </change>
>+ <change>
>+ <summary>
> qemu: Use GICv2 by default for aarch64/virt TCG guests
> </summary>
> <description>
>@@ -117,7 +117,7 @@
> </summary>
> <description>
> If supported in the kernel, host capabilities will now list
>- L3 caches. The code for other levels was added as well, but
>+ L3 caches. The code for other levels was added as well, but
> only L3 caches are reported currently.
> </description>
> </change>
>@@ -136,11 +136,8 @@
> </change>
> <change>
> <summary>
>- Support for VMDK files with version 3
>+ VMDK version 3 files are now properly detected
> </summary>
>- <description>
>- VMDK version 3 files are now properly detected.
>- </description>
> </change>
> <change>
> <summary>
>@@ -158,7 +155,7 @@
> </summary>
> <description>
> Even though there were default addresses before this change,
>- they were not saved in the XML. It is now possible to see
>+ they were not saved in the XML. It is now possible to see
> and control the listen addresses properly.
> </description>
> </change>
>@@ -169,7 +166,7 @@
> <description>
> Even though they were added automatically when USB device
> was attached, they could've been missing in some other
>- cases. The logic is now fixed so there are always USB
>+ cases. The logic is now fixed so there are always USB
> controllers, even if there was none of them in the specified
> XML.
> </description>
>@@ -181,7 +178,7 @@
> <description>
> Hitting the RPC limits we have is easier every day, so they
> were increased once again and some guessing logic was
>- improved as well. It is now possible to get more stats than
>+ improved as well. It is now possible to get more stats than
> ever using the <code>virConnectGetAllDomainStats()</code>
> call and push through even bigger requests and replies for
> all APIs.
>@@ -195,7 +192,7 @@
> </summary>
> <description>
> It could happen that the link speed for PCIe devices was not
>- properly reported or the nodedev-dumpxml just failed. That
>+ properly reported or the nodedev-dumpxml just failed. That
> was due to mistake in the field width, but should now work
> properly.
> </description>
>@@ -219,7 +216,7 @@
> <description>
> It could happen, in some cases, that libvirt would mistake a
> user-specified path for its own generated one and thus
>- remove it from the XML. The detection of such addresses was
>+ remove it from the XML. The detection of such addresses was
> improved now.
> </description>
> </change>
>@@ -407,7 +404,7 @@
> NVDIMM is new type of memory introduced into QEMU 2.6. The idea is
> that we have a non-volatile memory module that keeps the data
> persistent across domain reboots and offers much faster data
>- accesses. However, due to a bug in QEMU, this feature is not enabled
>+ accesses. However, due to a bug in QEMU, this feature is not enabled
> for QEMUs older than 2.9.0.
Of course except this last hunk as that is for an older version, I'm
rushing too much, I'll rather send a v2 tomorrow then regret the bunny
ears yet again.
> </description>
> </change>
>--
>
>Martin
>--
>libvir-list mailing list
>libvir-list at redhat.com
>https://www.redhat.com/mailman/listinfo/libvir-list
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: Digital signature
URL: <http://listman.redhat.com/archives/libvir-list/attachments/20170531/54cb4fe7/attachment-0001.sig>
More information about the libvir-list
mailing list